Your cart is empty.
Your cart is empty. Hordion 1 3/8inch/35mm Carbide Hole Saw Cutter Drill Bit Tooth Tipped TCT Hole Cutter for Stainless Steel Sheet Metal Sheet Plastic FRP Board
Features:
1. Perfect & Smooth Cutting Effect: The optimized tooth profile can achieve more precise, smoother, faster and safer drilling, so as to obtain a perfect cutting effect.
2. The Service Life Is Extended By 5 Times: The Hordion carbide hole saw can cut quickly and accurately in various metal applications, and can be applied to stainless steel, aluminum alloy, castings, section steel, iron, copper and other hard alloys. At the same time, the life span is 5 times longer than bimetal and HSS hole saws!
Kind Reminder:
1. Please check the integrity of the hole drill before use.
2. When the hole drill is installed in the electric drill, the three sides of the corresponding handle should be clamped.
3. When drilling holes, keep the verticality of the hole drill and the workpiece.
4. Use a small feed force when starting drilling, and use a medium feed force after positioning.
5. During drilling operation, the speed should not be too low to avoid jamming of the knife edge and causing broken knife.
6. When the center drill drills through the workpiece, the force should not be too large to avoid severe impact between the blade and the workpiece.
7. After the hole drill drills through the workpiece, the workpiece should be withdrawn while the hole drill is rotating.
Package Include:
1 x 35mm hole saw
2 x high-speed steel pilot drill bit
2 x spring
1 x L hex wrench
Kristine Freeman
Reviewed in the United States on August 6, 2024
This drill bit size was hard to find in my local hardware store. Needed 2.75” for the Intex pool inlets to convert a galvanized stock tank to a pool. The bit worked perfectly with my cordless drill!
J. Carter
Reviewed in the United States on June 3, 2024
I used this hole saw to cut two holes into a stock tank so that I could install hoses for water filtration. The hole saw cut the holes quickly and cleanly. The teeth are aggressive but still allow controlled cutting. Mine came with two pilot bits, both with a spring to help eject waste.Since I’ve only cut two holes with it so far I cannot be sure of durability. It’s made as well as a cheap hole saw could be though. Not comparable to expensive hole saws costing four and five times the price, but it’s not intended for that market anyway.
Ed from NM
Reviewed in the United States on May 7, 2024
I used this to mount a PSI gauge into a project box with a metal lid. It made short work of it. The resulting hole was clean and perfect. I'm impressed by the quality of the tool, though the case it came in was busted up when I got it. No big deal, I didn't buy it for the case. If you need to drill a hole to mount a standard size automotive gauge, this is your item.
Hyper Speed Media
Reviewed in the United States on March 20, 2024
I recently use this whole cutter to cut a hole in a 1/8th steel panel and it cuts it right through it without any problem. The blades are very sharp and a spring makes it very easy to pop out and discard the scrap metal.It cuts through metal very easily. I am so surprised by this. I will try to test it out more to see the longevity of the blades but for now I’m very happy with it and it does a great job cutting holes into metal.I’ve known about these Much much sooner as I will be using them a lot more in the upcoming weeks.I would highly recommend them for anyone that needed to cut holes into metal.
Barbara Riley
Reviewed in the United States on November 19, 2024
This hole saw broke the first time I used it. It broke at the arbor; where it fits into the drill. Just very poor quality.
Customer
Reviewed in the United States on October 5, 2024
Fast take:Great quality and durabilityGreat priceCons: not really a con as it's more compatability, might be better used with a drill press or corded drill as my M18 drill wasn't happy with it.I needed to cut out holes for replacement 120mm exhaust fans for my kitchen. This is the biggest metal hole saw I've ever used so there was a learning curve here for me: torque transfer from my M18 drill to my hands/wrist, often cutting power completely, drill brake not enjoying stopping the momentum, etc. Might be better to use a drill press or a good corded drill.The hole saw is a very high quality item, carbide teeth cuts fast and accurate. Metal structure is very sturdy, completely centered too with absolutely no deviations when spinning fast.I've only used this on a 1/16 thick sheet metal so I can't say how will it'll work on other thicknesses and materials.Highly recommend hole saw.
Mochaman
Reviewed in the United States on June 5, 2023
Product description is accurate. Comes with a plastic case to store hole saw, 2 drill bits with spring, and an Allen wrench. I've only used it to cut through hard & ABS plastic. Works great, cuts a clean hole. The storage box is a plus - keeps all parts together. However, I wish the box was long enough to store the hole saw with the drill bit attached.
Jacques Maisonneuve
Reviewed in Canada on August 7, 2021
Drill bit broke first time I used the hole saw
Kiteless
Reviewed in the United States on January 25, 2021
SECC: Electro-galvanized commercial quality cold rolled steel. Commonly used in ATX computer cases from the 90's and early 2000's. Not sure about modern cases. As I understand it "Cold Rolled" is harder than standard steel but I am not a metal expert, not even a little.I needed this for one specific use, to cut a 120mm hold in an old computer case with my Ryobi cordless drill. Keeping RPM's up and not pushing too hard seemed to be the key with this. The drill I have isn't like ULTRA POWERFUL anyway. But the center bit got through the steel quickly, and the hole saw itself, once I figured out the technique did an awesome job. It did leave behind some VERY sharp edges, as I think any hole saw would. I used a Dremel with a sanding wheel to smooth those out. I actually ended up using the spare bit this came with to drill out the 4 screw holes I needed to mount the 120mm fan as well. I probably should have but didn't use any oil or anything while doing this. I also liked the plastic case it came in. Happy customer.
Recommended Products
