Your cart is empty.
Your cart is empty.
Glass Tile Hole Saw With a Pilot Pin, NO NEED ANY GUIDES
Good performance: Diamond dust coating offers superior performance and cutting strength.
Wide application of the Tile Hole Saw: coated core drill bit removes a complete circle from glass, tiles, marble, granite, ceramic or other materials and only needs water for lubrication.
Features:
Good performance: Diamond dust coating offers superior performance and cutting strength.
Wide application of the Tile Hole Saw: coated core drill bit removes a complete circle from glass, tiles, marble, granite, ceramic or other materials and only needs water for lubrication.
Specification：
Total Lenght: 70mm ( 2.75 inch)
Drill Depth: 40mm（(1.57 inch)
Hex Shank Diameter: 18mm ( 0.7 inch)
Warm Tips: Please add water as coolant and drill slowly.
Keith G.
Reviewed in the United States on September 21, 2024
The whole saw worked very nicely to avoid dust flying all around your kitchen or bathroom use a squirt bottle with water in it will make the whole saw work better as you squirt as you drill. I watch countertop installers just use a vacuum this works out this method works better uh oh My secret is out🙂
ray
Reviewed in the United States on August 6, 2024
Needed one tile cut for shower head. Local bits were more than 2x the price. This was next day delivered and worked perfectly! If needed order one with no worries!
James
Reviewed in the United States on June 18, 2024
The hole saw worked, but the pilot bit didn't........ Luckily the hole spanned 2 tiles, and I could V-notch where the pilot bit should have been....
David Demers
Reviewed in the United States on June 13, 2024
This bit worked great for drilling my 1" quartz counter to add a garbage disposal air switch. It has a diamond tipped pilot bit and an outer core bit. Use plenty of water, water lubricates, keeps the bit cool and keeps dust down (don't breathe silica dust). Once the outer ring bit started to bite, I removed the inner pilot bit and continued with just the outer ring. Worked like a charm! This bit worked great for the 1 hole I needed. Still seems sharp and could probably drill more holes with it if I needed to.
Cheff Jeff
Reviewed in the United States on November 3, 2024
I needed a hole in my new “manufactured stone” sink but didn’t want to spend a lot on a drill I was only likely to use once. This drill did the job very well but I don’t think it would last for many more. Good value for something I unfortunately see as a throwaway tool.
april jones
Reviewed in the United States on November 23, 2024
I bought this for the only purpose of cutting holes in tile after the previous homeowner tiled over the shower knobs/valves and diverter and needed to replace them, but couldn’t, because they were tiled over. It easily cut the three holes and likely has much more life in the tool. It does generate a lot of fine ceramic dust so wear a dust mask and tape off the areas to collect the dust.
Adam Rahim
Reviewed in the United States on November 13, 2024
Bought this to drill 2 holes in granite 1 5/16 thick. No issues it cut though just as fast as my more expensive bits. I needed a odd size not the standard 1 3/8 for the normal sink.
Andrei
Reviewed in the United States on November 11, 2024
This worked well. I used it to cut two holes in 3/8 glass for an aquarium. I did not use the center bit as I had a wood jig clamped to the surface. This hole saw was a higher quality / straighter shank then another hole saw I had to use for different size hole. I cant speak to durability as I only needed it for 2 holes. I would buy this brand again.
Recommended Products
