Your cart is empty.
Your cart is empty.Product Description
The LENOX Tools Bi-Metal Speed Slot Arbored Hole Saw with T3, 2-1/8"-54mm, has enhanced tooth geometry that cuts 50% faster than previous LENOX hole saws. Twice as durable as our previous generation when cutting through metal, this bi-metal hole saw with a standard arbor features thicker walls to minimize tooth loss and improve durability. A staircase SPEED SLOT has a wide slot placed low on the hole saw and multiple leverage points to make it easy to work plugs out with a screwdriver. This design effectively removes sawdust and chips and helps prevent plugs from becoming stuck in the saw. 10% taller than previous models, it delivers cleaner cuts through two-by lumber.
From the Manufacturer
The Lenox Tools 1223334A 34A Bi-Metal Speed Slot Arbore Hole Saw, 2-1/8-Inch or 54mm outperforms all competitors in wood cutting, plug removal, and metal cutting applications. The patent pending Speed Slot features a staircase design for easy plug removal. The slot is wider than most and is placed lower on the hole saw with multiple leverage points to easily eject the plug with a standard screwdriver. The hole saw is 10-percent taller than the previous model to deliver cleaner cuts through two-by lumber. The Speed Slot efficiently removes saw dust and chips while producing a fast cut and preventing the plug from getting stuck in the saw. The new hole saw also features up to twice the life of the previous model when cutting metal. An enhanced tooth geometry, a thin kerf design and an advanced coating contribute to the efficiency of the cutting process by removing material faster, therefore generating less heat while cutting.
Frank Rocanello
Reviewed in the United States on February 27, 2025
Very accurate and easy to use. The side slots make removing the wood plug from the saw bit very easy. Makes a sharp clean hole.
Psychofisherman
Reviewed in the United States on July 17, 2024
These hole saws are great. Super sharp, which makes for fast cutting of materials. I needed this for a truck bed project. It worked awesome. My collection of these hole saws grow every yr it seems. They can use most of the Lenox arbor, and they stack inside each other as well for easy storage. I write the size on the top of them with Silver Sharpie markers. My older eyes appreciate that.
Red Rabbit
Reviewed in the United States on October 25, 2024
Ordered 2 1/8" Received 3 7/8".Product package had been open and the product had been used and then sealed back up with tape. I payed for a new unused item. Needless to say product was returned and reordered.The product itself is of good quality. I have purchased other sizes in the past with no regrets.
D. Davis
Reviewed in Canada on April 17, 2024
Works well for aluminum and wood.
Stig
Reviewed in Canada on July 30, 2023
Use it to cut a larger hole in the metal door. Worked great with little issue
Linda Martin
Reviewed in the United States on June 22, 2023
Hole saw cuts great but drill bit not adjustable and too short to place over drill point unless you at eye level.
JustChim
Reviewed in the United States on October 3, 2023
Bought this for cutting holes in doors for the dead bolt and door knobs. Works great and cuts smoothly.
Andreas
Reviewed in Canada on April 14, 2023
Worked good to drill through sheet metal
Tom Millar
Reviewed in Canada on October 13, 2022
Got the job done. Probably cheaper in store but not too expensive and didn’t have to leave home to get it
Kev Ontario, Canada
Reviewed in Canada on July 10, 2021
Used it with a DeWalt electric drill (not battery) to drill through a solid oak 100 year old ouside door. Smooth and clean with on issues.
Just_'in
Reviewed in the United States on October 5, 2018
This things a BEAST! This little sucker cut through this brass very easy. I forgot to measure the thickness of the brass but you get the picture . I put very little pressure on the drill and before I knew it I was through it! Just what I needed. I cut through 4 of these already and cut just as good the 4th time as it did the 1st time! Worth every penny guys! Also NOTE I didn’t see it on the pics here on Amazon but THIS DOES COME WITH A PILOT BIT ATTACHED TO THE HOLE SAW, which is nice to help guide it, I almost didn’t buy it bc I didn’t see the pilot bit...but know it does have one on it! 👍🏼 Hope this review helps guys/gals!
Art
Reviewed in the United States on April 7, 2018
For an old door with the wrong size hole I used a Lenox 2-1/8 hole saw and a Dewalt kit D180004, then cut a 1/2 inch plywood "backer" piece 5X5 traced out the circle on the Dewalt jig, and drilled a pilot hole with the hole saw in the circle center. I clamped the whole assembly when in position with 2 clamps. The drilling was very smooth so I will use this method for the other old doors. I backed the hole saw out a few times to avoid drilling right through the backer plywood.I used this combination based on information from different reviews.
whobdis
Reviewed in the United States on October 19, 2016
This ripped right through a metal door. The teeth are agresive so care must be taken or it will jerk your wrist off.
Recommended Products
$16.49
$ 7 .99 $7.99