Your cart is empty.
Your cart is empty.The universal ceiling fan remote control kit will turn most standard ceiling fans into a remote control fan! Easily change your airflow and light at the touch of a button all from the comfort of your favorite chair. This kit includes a receiver, remote control, wall dock and batteries. Lightweight and easy to use, comfort has never been so convenient!
Holly
Reviewed in the United States on September 7, 2024
I left my remote for my ceiling fan out on the side table and my dog destroyed it. I was extremely fortunate to have found enough of it to make out the product number. Did a search on Amazon and bingo this came up. What a relief to have found the exact original remote to replace my eaten one. Installed easily, works perfectly! This one got mounted to the wall right away where no doggos can snack on it!
Sarah Lowe
Reviewed in the United States on September 30, 2024
I have 5 of these, 4 installed so far, all work great no issues. However there's another post somewhere with setup help that's not in the instructions. Use the guys post and you shouldn't have issues. As the instructions are not so great that come with the unit, but after setup they have worked flawlessly. Fit over an existing single gang box (like I did) or can be mounted to a wall.
Vimlesh
Reviewed in the United States on September 23, 2024
I bought this in February and actually got to install it bit late due to delay in construction by the contractor. Not sure what's wrong but I have got it checked by 2 electricians one who installed the fan and set this up both are unable to make fan and light work via remote. It only switches on and off the light but not the fan.
Phil P
Reviewed in the United States on May 16, 2024
We decided to add a ceiling fan to our bedroom. After much study I decided to go with this Prominence model for remote control. The bedroom was only wired for a light fixture with two wires from a wall switch. Due to the room layout I had wired a 3-way switch; it is really needed. Base installation was simple. The problem: could I get a second remote to operate the fan/lights? After calling Prominence support, I was discouraged that this system was not designed to add a second remote. However, after reading that some people have had success, I ordered a second kit (I now have an extra receiver/controller module). Out of the box, the second remote did not connect. However, following the instructions to remove power from the receiver, turn it back on and within 30 seconds hold the learn button in the remote for 5 seconds, the second remote paired with the receiver. The first remote also remained paired to the receiver, so we now have complete control of the fan and lights from two locations, effectively 3-way functionality. I also took an idea from another reviewer. The buttons are small and it’s hard to find the lamp button in the dark. I found some small clear silicone semi spherical cabinet door bumpers that just fit the lamp icon on the remote, plus still show the icon. You can see the bumper in the photo. Now it’s simple to find the lamp button in the dark. The features all work as described. I’m delighted with this fan control.
Misty
Reviewed in the United States on February 22, 2024
My husband accidentally left our ceiling fan remote in his pocket and it hasn’t worked since going through the laundry cycles. This was an easy to use replacement - up and running in no time. I have ordered this twice - one set didn’t work but I was able to return for a full refund. Second set worked perfectly.
Eric
Reviewed in the United States on December 17, 2024
Worked well for the replacement remote that was damaged.
Bitjockey
Reviewed in the United States on November 30, 2024
Bought this to replace an AC-wired wall switch with many tiny buttons, impossible to control without careful examination, wife hated it. Most alternatives required an uncommon 12v battery, an A23. This unit uses 2x CR2023 batteries available everywhere. Not easy to mount on multiple wall plates, best suited for single wall plates.
Joseph
Reviewed in the United States on September 9, 2022
I bought this remote and receiver to go with an existing fan that already has a remote and receiver. I was hoping I could have one remote mounted on the wall next to the main switch, and the other remote on the desk or the nightstand for convenience.I am able to sync the fan with the new remote, or with the original remote, but not with both. Is there any way to sync one fan with two remotes? Or can I purchase a remote which is set to the same frequency as one of the remotes I already have?
Recommended Products
