Your cart is empty.
Your cart is empty.This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don't know which actuator position you need to replace, consult a qualified service technician. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Honda Accord: 2003, 2004, 2005, 2006, 2007]
J.P.
Reviewed in the United States on February 6, 2025
Car was blowing out excessive heat on both sides. Dual climate system. Immediately fixed the problem.Take pictures and use a stubby screwdriver for third (top) screw. You have to sign up 3 screws and two blend doors. Not easy but not hard. Took an hour and a coupla beers but Immediately fixed an excessive heat issue on an '07 accord with 278k on the odometer. For 35 bucks, the part was worth it's weight in gold.The top screw is a bear on and off.
Heros_N_Zeros
Reviewed in the United States on March 4, 2024
Purchased due to noise below dash that started and a few months later it began blowing hot on driver side and cooler in passenger. Not a slam dunk to replace due to location of part beneath dash + top screw of plate / metal frame containing the part in place is obscured. I chose to partially loosen that topmost screw and slide the metal frame out of the way. The other five or so screw we’re easily and fully removed.I was careful in removing the old part to notice the plastic rotating arm’s resting position. Because I did, I realized the new part’s arm was out of it’s needed starting position. + it would never install properly as it came out of the box.The arm has to be a near a 10 and 4 position to insert into two curved plastic guides / channels it flows in to open close HVAC doors for temp control.Prior to mounting it into place, I inserted the wiring harness/plug into the back of the part, inserted the key, turned key to on(not start). The arm turned to the correct position.I turned the key off, removed it and continued with part installation.Outcomes:Saved hundreds of $ the dealer would charge for part & labor!No more ridiculous below dash noises!No more uncomfortable temp imbalances!
Customer
Reviewed in the United States on September 21, 2019
Great overall experience
kenneth a clark
Reviewed in the United States on July 19, 2019
Fit just as described. Works great.
CoCo
Reviewed in the United States on January 20, 2019
Great
Recommended Products
$26.70
$ 12 .99 $12.99