Your cart is empty.
Your cart is empty.Product Description
Jhovani Orozco de Colombia 🇨🇴
Reviewed in the United States on March 25, 2025
Es justo lo que necesito para mis micrófonos Phenyx Pro
Rob Bogan
Reviewed in the United States on March 12, 2025
great
Private
Reviewed in the United States on April 6, 2025
awesome!
rodolfo
Reviewed in the United States on September 1, 2024
BUEN PRODUCTO
Mr Tall
Reviewed in the United States on March 22, 2024
These are light weight (i.e. thin metal) rack ears that do ok if you can make them fit your rack. Standard racks are 19" wide and these ears mounted to a receiver are only 18.75" wide. You can either file the mounting holes to be wider or perhaps one of your racks is a bit narrower. (I have one rack that fits without modifications)Also note that these are pretty thin metal and work best if you have other gear to help stabilize the receiver in the rack. In my case I used some double stick tape under the receiver to keep it from bouncing in/out.That said, it does make the receiver look much more professional than using a rack mount shelf for the receiver, and it also bring the face of the receiver closer to the front of the rack itself, making it easier to see.One last note is that I used these ears to rack mount an Innopow receiver into a rack. The Innopow and Phenyx Pro receivers are the exact same dimensions overall and have the mounting holes in the exact same spots on the case.
Joe O'Connor
Reviewed in the United States on April 25, 2023
Nice clear clean sound !Hand held and body pack East to pair up !I’m glad I purchased it !Definitely will purchase more items from Phenyx !!! Great price ! Great product!
ChasP
Reviewed in the United States on October 26, 2022
Too narrow for a 19" rack - I have the unit more or less hanging in there by putting washers between the rack ears and the unit itself just to be able to get the holes to line up with my rack - and the fronts of the ears are a little taller than a standard rack space, so you can't fit it in between any other rack mount gear - not even a blank panel. So far I'm ok with Phenyx's electronics - haven't really tested them in performance yet - but this is just annoying and a sloppy design. You might be better off getting a slotted rack shelf and using straps and/or velcro to mount your wireless receiver. I do like that it lets me front mount the antennas - if only it fit!
Blaze
Reviewed in the United States on July 14, 2021
Had to remove thr feet off the base of the unit in order for whole unit to fit within 1u space also the holes are in the wrong place the antenna connector and the rack panel rub against one another I used the removed feet as a spacer other than that it works as I expected it to
Noé T.
Reviewed in Mexico on December 2, 2021
Lo pedí para usarlo con una antena tnc y resulta que no queda apesar de que en la descripción dice que si es tnc al parecer es bnc
Recommended Products