Your cart is empty.
Your cart is empty.Product Description
Guteauto Engine Air Valve Holder Kit is used to pressurize the cylinder to keep the valve closed under the action of compressed air. Therefore, the oil seal of the valve can be replaced without disassembly.
During the compression stroke of the cylinder. You can hear the sound of continuous air leaking if the engine airtightness is inadequate. Locate the leak by listening for damaged parts.
Our pressure pipe has a 1/4 NPT ball valve and an M14+M18 thread. The spark plug position must be used to install the connector for this tool.
This kit is compatible with gasoline-powered vehicles like automobiles, trucks, ships, motorbikes, ATVs, and more. Not for use in automobiles with diesel engines.
Why Need this Engine Air Valve Holder Pressure Pipe?
- The car may tremble if the cylinder pressure is insufficient.
- Find the source of low cylinder pressure as soon as possible, be it valve or piston ring leakage.
- Uses pressure to raise the valve without removing the cylinder head, making it easy to replace the valve oil seal.
- When replacing valve springs or valve stem seals, pressurized air can help maintain the valve closed by pressurizing the cylinder.
Jakob
Reviewed in the United States on March 16, 2025
Line burst while working at 100psi. Directions say up to 110 psi is good. My ears are still ringing. This thing is a piece of trash.
Roger
Reviewed in the United States on January 26, 2025
Very nice tool for replacing valve seals.
Thurl W.
Reviewed in the United States on August 14, 2024
It did the job, but it had a slight leak which caused the outer layer of the hose to bubble up and burst.
Abraham M.
Reviewed in the United States on June 25, 2024
good
rocky austin
Reviewed in the United States on November 4, 2024
Great
J. Miller
Reviewed in the United States on October 15, 2024
Imagine trying to thread this long hose into a plug hole when it’s close to the firewall or strut tower. You need to coil it up and make it as short as possible so you can spin it without cross threading. It’s too stiff to spin when extended out and bent around corners. Works fine when engine is out of car.
Bob
Reviewed in the United States on December 12, 2023
Works like it should. Nice product if you need to hold valve up while engine head is still on.
Amanda and Dave
Reviewed in the United States on October 31, 2023
Great affordable tool to pressurize engine cylinders for valve work. The tool is very simple and well made. Thread into spark plug hole, hook up to air hose and turn the valve. I prefer to use a pressure regulator so I can control the pressure going into the cylinder. The price is great for this and well deserving of 5 stars.
Recommended Products
$25.88
$ 11 .99 $11.99