Your cart is empty.
Your cart is empty.Product Description
Specification
- Rail Type: 11mm Dovetail Rails
- Ring Diameter: 1 inch
- Material: Aluminum
- Style: High Profile (0.8 inch)
- Dimension: 1.9 x 1.57 x 0.79 inch
- Weight: 1.8 ounce per ring
If you are a avid hunters and shooting sports enthusiasts, the Modkin Scope Mounts are essential pieces of equipment for you
Aircraft-grade aluminum tactical scope rings
- Double scope ring mount for 11mm dovetail mounts
- High profile, one of the ring mounts design with removable stop pin, provide solid mounting on the rail
- Suit for most scopes which are in 1 inch/25.4mm scope tube
- Precision machining from aircraft-grade aluminum alloy, solid and sturdy
- Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately
- With two rail clamp screws and two scope clamp screw per side, Precision and Repeatable Alignment
NO
Reviewed in the United States on March 8, 2025
Great feel. Well made. Lock screw makes it very secure. 10/10 would recommend
Nour
Reviewed in the United States on March 20, 2025
Great Product
A Dunn
Reviewed in the United States on January 11, 2025
Just what I needed. Fit perfectly to an old 1” scope I had but needed claps for a 22LR.
David R
Reviewed in the United States on January 21, 2024
I have bought several of these rings to replace cheap rings that came with my Winchester and Tasco air gun scopes. These rings are vastly superior to the other rings and incorporate a stop pin to be used with a break barrel air rifle. A great ring at a great price. I have bought 3 sets and will continue to buy this brand.
Denver Doc
Reviewed in the United States on August 21, 2023
When mounting a scope, I, as an amateur, did not realize that one size fits all properly. For the Scope I was planning to mount ( 6x24 50 AOE ), I needed clearance between the scope and barrel; "medium" mounts did not provide the clearance. The large Dove Tail mounts worked great with an old .22 rifle. No additional prep work was required; they were milled as a pair and the scope settled perfectly "inline" within the mounts. Be careful not to tighten them too tight; there is a possibility ( I am told ) to damage the scope. Very pleased for the price.
Dad-Wil-Key
Reviewed in the United States on July 3, 2023
Picked these up to mount a larger scope on a 22 Mag. They provides plent of clearance for a larger objective lens and should work with a 50mm objective. I mounted a 44mm scope with room to spare.A hex wrench is provided to aid in mounting.These have 2 screws each for mounting to the dove tail and 4 cap screws each making the mount very secure. I torqed the screws to ~ 18-20 inch pounds using a Wheeler Fat wrench.
Heather
Reviewed in Canada on April 3, 2023
Nicely made and machined. I installed it on my old cooey .22 and it fits perfectly with just enough clearance for the bolt action.
Benjamin W.
Reviewed in the United States on March 1, 2019
I recently got to rebuild my father's old Marlin Model 60 that he had when he was a kid. Most of the internals got replaced and a Boyd's stock installed. I wanted to put a better scope than the replacement irons - it's an accurate rifle. So I ordered a Bushnell Dawn & Dusk for .22 and then had to find a good mount.Enter the Modkin rings. Not only were they machined well (or cast, not sure how they're made) but they're not too heavy, and they're a great price for a plinking setup.They mounted very well. I've gotten loose-mounting rings before, these are solid. You remove the top of the rings with an Allen key that is provided, install the first ring loosely, place the second and check spacing and eye relief for where the scope will sit, then use the stop screw in the base of the second to ensure that the scope is held down by the dovetail bracket and the stop screw. Apply torque, install scope, and then the tops of the rings. It was super easy and rock solid.It should be noted that the Allen screws they send with the rings are cheap feeling, of course, and I was worried on two of them that I would strip them out just installing the scope. It didn't happen, but be aware that they may need to be replaced - easy enough to do. YMMV.I also admit to stress testing these before putting them on the rifle - my father intends to teach my daughters how to shoot with this .22, so they have to be tough in case of an accidental drop or other unforeseen nonsense. So I mounted them on a dovetail-sized piece of metal mounted to a stock blank. I dropped them, threw them, and otherwise mildly abused them. Besides some cosmetic damage in the form of a few scratches, they didn't break loose or damage the dovetail mounting. Excellent.For $13 I can't complain about these rings past the Allen screws. I will update the review should anything happen with them, but as of now I am quite pleased with my purchase.
Jerre L. Roller
Reviewed in the United States on October 10, 2019
Needed some tall, 1" airgun rings and these fit the bill for my CenterPoint 6-20x50(with A/O) scope perfectly. The A/O with scope installed left 1/8 to 3/16" between it and the action of my Hatsan 95 springer to even use scope dust covers. Didn't need to use the "stop screw" on the one ring as my Hatsan uses a factory-made rear scope stop that works, but if you have a rifle that has a drilled hole in the receiver, the ring stop is something you definitely need to keep the scope from sliding around the rail's slot from springer or ram-air rifles that have a lot of energy. Once everything installed and scope adjusted fore/aft, it gave a nice gentle cheek weld and great sight picture. I think I'll be pleased when rain stops to go and shoot some targets to get scope sighted. UPDATE: Weather cleared and wind calmed down after a few days, so out to back yard I went to zero in scope and test the scope mount. The mounts worked very well up to a point. I would suggest, that once you get your scope where you want, then removing one screw at a time, clean off any oil, use just a drop of "blue" Loctite on the end of all screws. You want the extra benefit of knowing that those scope screws don't loosen up at a time when you need and want that accuracy and think the scope has gone bad, when it was just loose rail mount screws or scope ring screws that started backing out from the harsh recoil, even though the rings were torqued down, from my experience of using scopes and rings for over 50yrs.
Recommended Products
$164.50
$ 81 .99 $81.99
$10.98
$ 4 .99 $4.99