Your cart is empty.
Your cart is empty.UTG 1"/2 Pcs. Medium Profile Air gun Rings w/Stop Pin Features: - Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish - Complete with Stop-pin for Rock Solid Application - Ring Base Designed with Locking Hex Screws to Tightly Fit on Mounts with Air gun/. 22 Dovetail Dimensions - Reversible Locking Plate to Fit Full Range of Air gun/. 22 Rails Specifications: - Material: Aluminum - Weight: 1. 65 oz. - Pieces: 2 - Rail Type: . 22/Air gun - Profile Level: Medium - Ring Diameter: 1" - Ring Width: 21 mm - Max. Scope Outer Dia. : 53 mm - Screws Per Ring: 4
Charles A. Smith
Reviewed in the United States on March 9, 2025
Has soft material on inner part which prevents scratching of the scope tube.
Reaperman
Reviewed in the United States on March 19, 2025
My scope fits nice and snug on my .22
Customer
Reviewed in the United States on April 8, 2025
Fits the RWS 34
Tom
Reviewed in the United States on June 12, 2024
Well made and works well on a 11mm Dovetail mount
NS
Reviewed in Canada on December 29, 2024
Have not used yet, seem to be of good quality-put into my stock for future use.
Eric Hamel
Reviewed in Canada on October 12, 2024
Je l'est est installé sur une vieille 22LR C-I-L et c'est excellent je recommande l'article pour les carabines 22LR qui n'ont pas de base dessus qui ont seulement des grooves sur l'action 👌
Bryon, at Ottawa
Reviewed in Canada on September 17, 2023
These are excellent quality and finish. Came with extra screws, pin and allen keys. They fit well and are completely padded on the inside of the rings helping to not damage or distort the scope. Very pleased with these rings... 5 stars all the way.
Glenn
Reviewed in Canada on June 28, 2018
A very solid set of rings, and good value.
D. Gallardo
Reviewed in the United States on March 4, 2014
These rings are fantastic. I am using them on a Hatsan Striker 1000S air rifle in .25cal. They fit the weaver rail beautifully, and the screws really hold the rings and scope in place. The construction is definitely capable of taking a beating, as long as your rails hold up. The kit comes with an Allen wrench so that you don't have to buy any extra tools to install.One thing I noticed about the scope installation, which may be the same for all other rings, is that as I tightened the rings, the scope would shift off level (twist left or right on X axis). I tried a combination of different methods to try to keep this from happening, but finally had to intentionally turn the scope off level enough to compensate for the tightening. You'll understand what I mean when you go to install yours.Make sure that you read the description to ensure that these rings will work with your scope. I bought them for the NcStar Freedom Series Sniper Scope (3-9x50 Mil-Dot), and didn't read the full description which states that these are for 45mm and below objective diameters. If you have anything bigger than 45mm, you need the high profile rings, or larger.
Emeuser 2
Reviewed in Canada on October 11, 2014
Love these mounts. Very well made and beefy looking.They have a set screw to hold them securely onto the rail. Price is excellent and they work wonderfully holding my scope securely without ever moving. I highly recommend these mounts.
foxdog
Reviewed in the United States on June 4, 2013
I was unsure of the highth of these rings because of the description (mid-profile). After receiving them and reading the packaging, it was apparent they were more on the tall than mid hight. According to UTG, they will accommodate a 53mm objective bell on a scope. I like my scope almost touching the barrel so these will not work for me (to tall). That's the only reason for a three star review.
Dan F., WI
Reviewed in the United States on April 23, 2013
I used these to mount a 1" tube on my spring piston air pistol. This gun has a significant amount of recoil, but these work great in keeping the scope from slipping on the dovetail mounting rail, and they were a perfect for the amount of height clearance I needed. They did need re-tightening after every 20 shots or so, but a bit of Locktite on each screw solved that problem.The mounts are light weight (important since, with the scope, the pistol is almost 4.5 pounds), but extremely well made and sturdy. UTG also includes with the mounts the three different size Allen wrenches you need and one replacement screw in each size (set-screw, clamp screw and rail-mount screw). I consider this a definite "value added" perk since a lost screw would not be easily replaced otherwise.At less than 11 bucks, these mounts are a bargain and hold up against some pretty vicious recoil action. I'm very happy with them. Happy air-gunning and, as always, shoot safe.
Sanford12
Reviewed in the United States on November 19, 2011
Bought these as a replacement for the originals that came with the Quest. The originals just wouldn't hold. The Accushots hold like crazy. After a few shots(50) I re-tightened all the screws and zeroed it in on 25' air rifle targets at a distance of 30 feet. The last 25 shots were all in the black except for 1 flier with an average group of less than 3/4's of an inch center to center. All while standing up with the rifle resting on a towel on a not to steady cardboard box. The original CenterPoint scope performed fine and has held it's zero for 50 shots on these mounts. Crosman Destroyer 7.9 grain pellets were used exclusively. The reason I tried these rings was for the scope stop in the form of a pin that mates to the hole in the Quest and the 2 rail screws per clamp. Good product at a good price.
Recommended Products
$10.98
$ 4 .99 $4.99