Your cart is empty.
Your cart is empty.Product Description
Specification: Diameter:43mm/1.69in
Length:71mm/2.8in
Connection Size:1/2-20UNF
Clamp Range:1 ~ 13mm / 0.04 ~ 0.51in
Package List:
1*Drill Chuck
Eybar Hernan Ortega Muñoz
Reviewed in the United States on March 7, 2025
Es bueno
Chris
Reviewed in the United States on March 10, 2025
Cheap and good so far on my Ridgid 18V drill! seems solid but is sometimes hard to unlock.. this will probably get better with more usage.
Exelete
Reviewed in the United States on February 5, 2025
Exelente
Frederick P. Bartlett
Reviewed in the United States on January 5, 2025
This is a great and inexpensive replacement chuck for the Weider 1837 chuck used on Porter Cable drills. It uses all steel construction and costs less than half of the OEM replacement. If you have another brand drill, be sure to check your drill to make sure it has a 1/2 inch FINE thread shaft coming out of the drill. Follow instructions on You Tube as the removal screw is left hand thread with a T 15 wrench opening. This chuck will get your drill working properly again.
Joe Kay
Reviewed in the United States on January 18, 2025
This chuck fit my drill. I did have to get a 13 year old to show me how to put it on
Jt
Reviewed in Canada on July 27, 2024
Fit my Milwaukee drill. Easy to install.Fairly well made. Good value.
Customer
Reviewed in the United States on May 14, 2024
The chuck on my craftsman cordless drill would slip and unlock, drill bits FALL OUT in hard to find places. The chuck was impossible to remove. I removed locking left handed screw, put ginormous hex keys in chuck and hammered the fool out of it. I heated it with propane torch until the rubber parts smoked and chucked a snap on tools 1/2" drive hex driver into it and hammered the fool out of it with an Ingersol-Rand model 230 impact wrench for a long time. I CUT the chuck into tiny pieces with a four inch angle grinder and a cut-off wheel....took more than an hour. This chuck screwed right on, runs true and holds tight. Good price, quick delivery. I Love it!
Ray Greenough
Reviewed in Canada on March 30, 2024
Works great value
John P. Ziebron
Reviewed in the United States on June 20, 2023
I bought this chuck a little over a month ago based on the good reviews. It fit my 20 volt DeWalt drill easily and has nice feel to it. I have very good grip strength to tighten the chuck and even do the "locking" manuver. But about one in every 3-4 times when drilling the chuck looses up, a lot. And this even happens drilling 3/4 inch plywood. Maybe I got a lemon and now it's too late to return it. But I would never take a chance buying it again.
Christina Miller
Reviewed in the United States on December 13, 2023
Purchased this for the M12, but it is far too large. It fits great on the M18 drills. Works well and seems like it is good quality.
Cliente de
Reviewed in Mexico on October 20, 2023
Buen producto
Customer
Reviewed in Canada on September 17, 2022
Fit perfectly onto my 5 year old Milwaukee M18 1/2 drill Cat No 2606-20. very easy to change use a 1/4 inch drive CHV PH3 Philips head bit to remove the retaining screw (left hand threads so to loosen turn right) DONT USE A NORMAL NUMBER 3 SCREW DRIVER YOU WILL JUST END UP RUINING THE SCREW !! re and re time about 10 minutes
Recommended Products
$15.38
$ 6 .99 $6.99