Your cart is empty.
Your cart is empty.
Yakamoz 2 Pcs 1/2 Inch Shank Top & Bottom Bearing Flush Trim Router Bit Set
Features:
Cutter: CNC ground to a 600 grit, mirror-like finish
Hook & Shear Angles:High hook & shear angles allow cutters to slice smoothly into stock producing clean, splinter free.
Bearing: Totally enclosed & lubricated
Coating: Baked on heat resistant coating prevents build-up of sawdust, resin, and pitch.
Balance: +/- .003" tolerance (allowing smooth operation at high RPMs)
Specification:
Body:Solid Hardened Steel
Blade:Industrial Grade Micro Grain Carbide
Shank Size:1/2"
Cutting Diameter: 3/4"
Blade Height: 1" & 1-1/2"
Application:
Be used with either a top or bottom template. Especially useful for template work when routing rounded or curvy wood with sensitive end-grains.
Package Included:
2 x Flush Trim Router Bits
Dave D.
Reviewed in the United States on November 10, 2024
I used the larger of the two bits to even out two pieces of 3/4" MDF laminated together. Using a router table, the cut was clean with no burning. The bearings are accurate, as after flush trimming the result was a perfectly even lamination 1-1/2" thick. I especially like the bearings being on both the top and bottom, allowing templates mounted to either the top or bottom of a workpiece.
chad a jones
Reviewed in the United States on May 4, 2021
These are ok for the price. This is my second set due to ruining the first set completely which was my own fault on one bit and the second the blade chipped which was more than likely my fault too lol. But they cut so good I replaced them.
Home Remodeler
Reviewed in the United States on May 26, 2021
I find these bits excellent for smaller projects where better quality, longer lasting, and more expensive bits don't make sense. They cut well and under hobbyist use they do the job well. I can't say how long they would last under high production use, but for the 4, 5, or 6 times I will use them they work great.
Ben
Reviewed in the United States on June 3, 2020
I'm a professional woodworker and saw the price, the quality looked okay and thought I could use a couple flush cutters and would give it a try. I've been paying more for 1 bit and not only got 2 but these bits look seriously heavy duty, the 3/4" diameter cutters surprised me, usually they 1/2" like the shaft. I'm pretty impressed so far...
Customer
Reviewed in the United States on August 23, 2019
Works great and was just what I was looking for
E. Robertson
Reviewed in the United States on August 18, 2019
I would compare this to a cheap chinese HaFr item. If you only need to route 5-10 linear feet, go for it. But if you plan to route more than that, spend a few extra bucks on a real bit.1) My washer and bearing literally flew off within 5 minutes of routing. Not even repairable2) Cut quality is poor. Gouges on side grain and burns the end grain.Stay away. Get the red bits not the yellow ones.
tammy1
Reviewed in the United States on July 26, 2019
My husband uses these for woodworking and these allow him to do different things.
Customer
Reviewed in the United States on December 17, 2019
Works great
Recommended Products
$42.38
$ 18 .99 $18.99