Shopping Cart

Your cart is empty.

Your cart is empty.

Woodford 22CP-10-MH Horizontal Freezeless Faucet Provides Hot and Cold Water

Free shipping on orders over $29.99

$154.88

$ 62 .99 $62.99

In Stock

About this item

  • CP inlets are 1/2 inch male pipe thread or 1/2 inch sweat. For use in maximum 10 inch wall thickness. Inlets are 5"apart on center. Overall length of the inlet pipes is 11 3/4" from tip to wall flange.
  • The freeze less Model 22 hot and cold faucet is designed and intended for year round hot or cold irrigation and cleaning purposes regardless of outside temperature
  • The Model 22 contains an integral back flow protection device and does not require an add on vacuum breaker


The Woodford 22CP-10-MH is a Model 22 Series horizontal freezeless wall faucet provides hot and cold water for cleaning purposes regardless of outside air temperatures, includes anti-siphon protects and pressure relief valves with a 1/2" male thread or 1/2" female copper inlet and has a powder coated cast aluminum handle and includes intergal backflow prevention devices, an atmospheric vent and patented checks to provide anti-siphon protection along with resetting pressure relief valves. The Woodford 22CP-10-MH is intended for year round residental irrigation purposes and has a 10" rough-in or 11 1/4" mounting depth.


MMMMelons
Reviewed in the United States on March 17, 2025
Awesome product. Easy to install with Pex. Hot and Cold Water outside is really nice.This is my second one I have purchased over the years. I have been using the First one for over 10 years now and never had any issues.
Dragon
Reviewed in the United States on July 18, 2024
Well made and installed easily. Now my dogs can enjoy warm water during their baths.
Mom25
Reviewed in the United States on December 27, 2024
We installed in the garage for use at additional sink. Needed hot and cold ability and heavy duty use. Great quality and functional for the space
Bob Stoeckle
Reviewed in the United States on April 10, 2024
Product came assembled with shark bite fittings attached. They appeared to be tight, but are not. If they were going to be on the fitting, you would expect them to be tight as a result had to install twice after they leaked the first time.
Cynthia Tilghman-Ladd
Reviewed in the United States on August 3, 2023
This was exactly what I needed for an outside barn where I needed hot and cold water for grooming my dog! It was installed easily, and will not rust which had been the issue with other less expensive outdoor faucets!
Matt
Reviewed in the United States on December 29, 2023
It’s expensive but I wanted one fixture for hot at cold in the garage. If I want to wash the car in the winter, I want to be able to use a little cold water and some hot water. Works great!
Rolidnot
Reviewed in the United States on April 1, 2021
I just finished installing this hot/cold mixing tap in my garage shop. I replaced two junky freeze proof taps installed by the builder - I think an idiot installed the original taps. They made all sorts of noise, backwashed water onto the wall and peed water all over the floor at random times. They just had to go.$100 isn't cheap but it's what you pay for made in USA by a company based in Colorado Springs, Colorado since 1929 that also makes Woodford Bourbon. I'll have to try the latter. (Hint - I wrote this on April fools day).The Woodford mixing tap is well made, solid bronze head, aluminum powder coated tap handles, stainless hardware holding the tap handles onto the long stems. I got the new Woodford tap installed over the period of two days.I had issues with the prior junky taps ruining the drywall behind themselves. I removed the damaged drywall, replaced it with a piece of 1/2 exterior plywood and covered that with Hardiboard cement board held in place with stainless screws. (see photo) that I will paint the Hardiboard cement board backer shortly. Cement board is frequently used in wet locations like shower surrounds and is an excellent backer for a tap where water may splash around from time to time.Plumbing was straight forward if you know what you are doing. The Woodford 22 faucet works great - quiet, mixes hot and cold precisely, has a good "feel" and as I mentioned, it's made in the USA. Woodford also has a total rebuild kit available - the Woodford RK-22PRV Repair Kit which is about $30 on Amazon. I bought the rebuild kit with the faucet. I'll store it away for future use in case something stupid happens like Woodford stops making the faucet or the rebuild kit.Overall, this is a big upgrade over my prior garage shop setup with two separate faucets connected with a washing machine "Y" hose to my garden hose. It’s quiet compared to my old junk faucets, doesn’t pee water on the floor every time I open or close a tap and it mixes hot and cold water well. I'm impressed with the quality of the dual tap setup. I originally saw the single tap version of this product advertised in Fine Homebuilding, a source I use regularly and respect for it's high quality content and insights. Hope that helps!
DAN
Reviewed in the United States on May 14, 2020
A little noisy as you turn the knob. My faucet had particles of iron mixed into the brass so there is rust specs forming, Pretty easy to see up close but probably wont effect the long term durability of it. It's great to be able to mix hot and cold water in the fall/winter/spring rather than freeze your hands
Recommended Products

$12.99

$ 5 .99 $5.99

4.7
Select Option