Your cart is empty.
Your cart is empty.Product Description
Common Q & A of customers Below
What is the function of the ceiling fan remote control 53T KIT?
- Smart ceiling fan remote control, work with Alexa and Google Home.
- This is a ceiling fan remote control kit, included a 53T remote control and a Wi-Fi 28R receiver.
- 4 Code switches (dip switches) to set a unique frequency (16 possible code combinations).
Compatibility
- This universal ceiling fan remote control kit with light dimmer, works almost all 110V 3-speed AC ceiling fans.
- Compatible with Harbor Breeze, Hunter, Hampton Bay, Honeywell, Home Decorators Collection, Litex and the other ceiling fan brands.
Does it support to control multiple ceiling fans?
- Yes! please check the PIN code settings are different between these, or it may let transmitter next door or your Neiborhood's remote activates this ceiling fan in your other rooms. This may cause the fan turning on strangely while you are not at home.
Does it support dimming function?
- Yes! But only support light ON/OFF. If your light is LED bulbs, just can control LED bulbs on/off.
Ceiling fan remote control transmitter
Wide Compatibility
- Universal design is compatible with most major ceiling fan brands including Hampton Bay, Home Decorators collection, hunter and many more
- Compatible with most downrod style AC fans, not recommended for use with hugger style fans
- 3-speed fan control, 4 DIP Switches ,16 different code frequencies control up to 16 fans,Free pair ,no interference!
- Light on/off/dimming controls, Compatible with LED, CFL and incandescent light bulbs.
Easy to Set up
- 4 Dip switches (0 is down and 1 is up)
- Adjust these 4"Dip" on the side of our wall remote to match the dial code of the built-in receiver of the fan or old remote.
- Our Receiver has 16 different frequencies for fans.
- Compatible with most of 3-speed AC ceiling fans, specifically design for Hampton Bay Harbor Breeze fans, Hunter Litex, Home Decorators Collection, Westinghouse, Honeywell and other brands etc.
Wi-Fi Function
- Wi-Fi Enabled, remote Control / Smart Life APP / Voice Control - 3 ways to control your ceiling fan & light, dim your lights and adjust the ceiling fan speed from anywhere anytime, Compatible work with Alexa, Google Assistant.
- Upgrade your home with the Smart Wi-Fi Ceiling Fan Receiver, the perfect solution for modernizing your ceiling fan and integrating it seamlessly into your smart home environment with Alexa and Google Home compatibility. Note: the Wi-Fi receiver only supports 2.4GHz network.
Suitable for ceiling fan with reverse switch
Use the steps below to change the direction of your ceiling fan:
- Shut off the ceiling fan and wait for the blades to come to a complete stop.
- Using a ladder or step stool to reach the motor housing, locate the direction switch.
- Flip the switch in the opposite direction.
- Step down and turn the ceiling fan back on.
- Verify the ceiling fan blades are moving in the right direction.
How to set up
- Before installing the remote, please cut off the power supply of the fan, and read the instructions carefully, and install the remote according to the instructions. (Incorrect wire connection can damage this receiver.)
- Remove the remote box cover to look at the dip switch settings. You will see four sliding buttons.
- SETTING THE CODE
This unit has 16 different code combinations. To set the code,perform these steps:
A. Setting the code on the transmitter: Slide code switches to your choice of up or down position. (Factory setting is all up). Do not use this position. Use a small screwdriver or ballpoint pen to slide firmly up or down .
B. Setting the code on the receiver: Slide code switches to the same positions as set on your transmitter.
If you do not know the code switch pattern, please check the below all 16 codes chart for reference.
Smart Wi-Fi Ceiling Fan Receiver
how to install
IMPORTANT: Fan speed and light control will not be activated by remote if pull chains for fan and light are not set to the HIGH and ON positions respectively
- Before you begin, set the fan speed to high. If it’s equipped with a light source, make sure the pull chain turns the light to the on position.
- Turn the wall switch to the off position. For added electrical safety, flip the breaker switch and turn off the main power supply.
- Use a step ladder to reach the base of the fan. Remove the canopy by unfastening the external screws with a screwdriver.
- Follow the instruction manual that came with your unit to connect the wires and adjust the ceiling fan dip switch settings to match those found on the remote control.
- Install the wireless ceiling fan control receiver into the base. Wiring will vary according to the manufacturer. It may also change if the fan includes a light, or your wall has a separate switch for the light and fan motor. You may not need to use all the included wires.