Your cart is empty.
Your cart is empty.Product Description
Tuning Peg Button, RiToEasysports 6 PCS/Set Tuning Pegs Machine Heads Acrylic Buttons for Acoustic Electric Guitar(Green) Tuner Buttons
- High Quality: 100% brand new and high quality. This Guitar Tuning Peg Button is made of high quality acrylic material, which is friendly, sturdy and to use, it has stable working performance, long service life.
- High-end Accessories: Great tuning peg button of standard acoustic guitar and electric guitar tuning pegs. Elegant appearance, nice decoration of your guitar head.
- Easy to Install: Electric guitar tuning keys comes with 6 pcs white ferrules, 6 pcs black ferrules and 6 pcs screws for easy installation.
- Superb Craftsmanship: Tuning peg button's delicate workmanship with good texture, smooth surface for you to use.
D0nk3y
Reviewed in the United States on January 26, 2025
eh they're ok not the right fit for a Epiphone 60s
Luis Roman
Reviewed in Mexico on July 2, 2024
Es un producto muy bueno y es exactamente lo que pedi
Cliente de
Reviewed in Mexico on November 1, 2023
Se adoptó a lo que yo necesitaba y no tuve mayor problema en utilizarlo
Luis Eduardo Samperio
Reviewed in Mexico on June 16, 2021
Excelente producto, solo verifiquen bien la medida de las clavijas, por que no encaja muy bien en algunos modelos y hay que modificarlas un poco. Aun así excelente producto
Z
Reviewed in the United States on February 4, 2021
These blow. Smaller than expected and they don't fit on my Grovers. Who the heck wants to have to file them? Not worth it. The color makes them look like cheapies too.
Matthew
Reviewed in the United States on February 19, 2021
I got these to replace the heavy metal tuning heads on my PRS. They do not fit the shaft of my tuners and after boring out a hole that will fit, it doesn't turn the tuner. Instead, it loosens the screw holding on the head and the string goes limp. If you try to tighten the screw to hold tighter, the plastic cracks. I would not recommend buying these tuner heads unless you know they will fit the tuners you have. I'm out $10 so I'm only mildly sick to my stomach about this purchase. Mainly because I wanted to reduce the weight of my headstock to get better sustain. My search will continue to find a solution that works with PRS tuners.
Bippity Boppitty
Reviewed in the United States on November 4, 2021
These were an exact fit for my Ibanez AM73 tuners, using all original hardware. This means these will fit Gotoh tuners as well. They weigh much less than the butter bean style they replaced. To brass tacks then: do they make my budget AM73 look like a vintage ES335? No, not really. The ‘real’ ones have a translucent aspect, and these are a bit on the lumpen, dull green side. Plasticky or maybe ‘ivory-like’ and not translucent at all. Still, when I’m rocking’ out at a gig in front of a crowd - read: ‘playing by myself in the basement’, it does look Ok. Plus, for like 10 bucks?! Added bonus: came with a little baggie containing shaft spacer rings/lock washers and screws for other projects.
brad crisp
Reviewed in the United States on December 5, 2020
Looks great! Had to do some filing to make them fit my Grover tuners on my LP but worth the effort!
dl125
Reviewed in the United States on November 19, 2020
I've had a lot of Gibson's, but these years they've been switching over the Grover locking tuners. I've never had them before and kind of like them now...well except the kidney bean heads/buttons. I like the look of Kulson ones and on a Les Paul I bought the previous owner switched them over to Gibson deluxe but he destroyed the head stock drilling into it and the clear coat pushed up on certain spots. I got a 2017 SG standard T and was afraid of going through the same nightmare. Then searching for the chrome tulip buttons saw these!If you get them they are small and don't fit. Like user ScotWithOne_t I modified mine to fit by using a small triangleFLAT file. I worked one for about 5 mins of filing. Once I got it sort of snug onto the post - and it grabbed at least 2-4mm of it - I used a screw that comes with the kit (longer then stock) then started tightening it down SLOWLY. This will push the button onto the post. All in all they look good; I didn't have to buy an expensive set or drill into my guitar. I got the vintage green ones, but the beige ones look cool too.
Joe
Reviewed in the United States on October 12, 2020
Well, I knew I was taking a bit of a chance and sure enough, the hole is too small and doesn't fit. I got these to try to lighten up the neck of an SG, and they weigh only about 1.6g per peg, while the metal pegs weigh 12.6g. If these fit I would have lightened up the neck by 66g, which works out to about 0.6Nm of torque. that is significant. Now looking for an alternative.
ScotWithOne_t
Reviewed in the United States on January 9, 2020
I wanted the vintage "Kluson" type tuners for my SG-style Stewmac kit. The kit came with modern sealed tuners and the headstock holes were drilled to 10.5mm. Vintage style tuners will not work without adapter bushings which are ridiculously priced for 6 little pieces of metal... not to mention they may not fit right since there seems to be 0.5-1.0mm variance brand to brand on busing O.D. So I though I'd try just replacing the tuner buttons from the big chrome ones to these vintage style plastic tulip shaped ones. They look nice and look pretty close to the vintage style now. See photo comparing my Epiphone Les Paul. They are a little smaller, and just a wee bit more yellowish-green than the real ones.Fitment was kind of an issue. They have holes with flat spots to fit over the machined shaft on the tuner. They are too small. Luckily, since they are plastic, I used a drill bit that just fit into the hole and rocked it back and forth to machine down the flat spot enough so the buttons fit over the shaft. Took some trial and error and I left them pretty tight, enough so that I had to tap them on with a small hammer... but be careful doing this since they are plastic and can split in half. I wanted them as tight though since if I drilled them too loose they would not turn the shaft, regardless if the screw was holding it in tight. The flat spot is there so the button can apply torque to the shaft, so if you drill it to a loose fitting round hole, the button will just spin on the shaft even with the screw being tight.I'm giving this 4 stars because they are nice, but not perfect. Perhaps these fit better on different brands of tuning machines. It would be nice if this stuff isn't more standardized. There is also a visible nubbon where it was broken free from the sprue, as all injection molded parts will have. Despite minor issues, they are a good, cheap alternative to swapping in some Grover 135N tuners, or going through the hassle of finding the right bushing for vintage style tuners.
Recommended Products
$39.99
$ 19 .99 $19.99
$14.99
$ 7 .99 $7.99
$27.95
$ 14 .99 $14.99