Your cart is empty.
Your cart is empty. A light weight low profile scope base rail for H&R1871 Pardner pump shotgun. The rail has 14 ring slots which make it easier to set up eye relief and find more desired placement of scopes or red dot sights on top of the receiver. The scope rail is compatible with both Picatinny and weaver rings and also will mount tactical red dot sights with Picatinny mount. Machined from extruded aluminum alloy. Mounting screws are included with the unit.
Rail type: Picatinny and weaver
Number of ring slots: 14
Overall length: 5 7/8”
Finish: Anodized matte black
Weight: 1.4oz
Tammy & Kevin VanHoozier
Reviewed in the United States on February 5, 2025
Fits perfectly on my NEF Pardner 20ga and allows me to mount any of my optics on it.
Kris
Reviewed in the United States on February 26, 2025
Fits exactly as it should. Have your own tools. It came with an Allen wrench when the screws were flathead.
ZA_Survivalist
Reviewed in the United States on August 8, 2018
Fits NEF Pardner pump (both 28” & 18”) receivers like a glove. Mine also came with an extra mounting screw.Product came double packaged as to protect the rail and finish from maring. I really appriciated that. Shipping was also very fast (without prime)Rail has a center cut down it so you can still see the bead front sight if you don’t have an optic mounted. Rail section is well wthin spec to accept any pic mount. Tried different rings and mounts and all fit very well.Buy with confidence.
Corey C. Jordan
Reviewed in the United States on December 28, 2017
This rail is designed so that you can sight under any optic on the rail, should that optic fail. Be sure to use blue Loctite on the screws when tightening them. I also added a TruGlo snap-on fiber optic front sight. These are standard on new Winchester SXP security shotguns. This does two things: 1) the fiber optic gathers ambient light and is easily seen, even in low light. 2) It is taller than the standard bead sight, which is necessary when sighting thru the rail, under an optic. $15 here on Amazon. I've attached a photo of the H&R with rail, optic and TruGlo sight on my H&R. This shotgun has been upgraded in many ways, but I started with this rail and a $23 reflex sight (which has handled over 800 rounds, many of these high brass, without change in zero). Here's a link to optic, now discounted a bit...
Nic Fairbanks
Reviewed in the United States on October 12, 2017
For owners of Harrington and Richardson shotguns and you want a picatinny rail for your gun, this works perfectly.After quite a bit of research, yes, I'm sure some Remington 870 rails would fit, but this was designed for the shotgun.As you can see from the picture, rail is on and I have a holographic reflex sight mounted.Good value.
ProjectSpawn
Reviewed in the United States on November 19, 2016
Gives me more functionality to my H&R, i was able to mount a holo sight to the top and this has held up pretty well through the abuse of a full tube of slugs. Only thing i would advise is to put some locktight on the threads if you plan on runnin your gun for a while.
Supdog
Reviewed in the United States on January 26, 2015
This fit my H&R 1871 NEF shotgun perfect. I have attached this rail without thread lock for now just to test it out. I will secure the rail with thread lock soon and then mount the new low profile rings and scope and then take it to the range for a real test. The fit and finish is good except for a couple of spots where the finish was scraped off in between the rails. Not a big deal since the rings and scope will hide these spots anyway. The finish matches the H&R finish and it looks very nice mounted on the receiver. I would recommend this product for your H&R shotgun. The price is right and the quality seems to be very good. It also came with an extra screw. Just make sure you use the proper size screw driver when you removed the insert screws and mount your new rail so not to damage the screw heads during install. Hope your experience with this product is as good as mine is. I hope this review helps.
Your Name Here
Reviewed in the United States on March 25, 2014
If you are a fellow owner of an H&R Pardner Pump Protector 12 gauge with an 18.5" barrel, stop thinking and just buy this. Right now. You KNOW how hard it is to find specific parts that are MADE to fit.After months of searching online and at local shows after purchasing my PPP, I was never able to find one. Some other similar rails on Amazon had questionable reviews about the length of the installation screws, and I was hesitant. At the time I purchased this, it had 2-5 star reviews, and I took a gamble. This thing is PERFECT. Holes line up, screws are plenty long, and the installation took all of one minute. Remove the three factory screws, line up the rail, and atach with the new ones. You might want to use a dab of threadlock on the screws because of the recoil on this TANK of a firearm. Shipping was quick, I had it in a few days, and the item arrived in a padded envelope, the seller was "treadpro". I am not sure if this will fit the regular Pardner Pump 12 gauge with 28" barrel or either of the 18.5" or 28" 20 gauge variants as I do not own them, so maybe someone else can speak for them. But it fits the 12 gauge w/ 18.5" barrel like a glove. Now, just to find a nice red dot sight to mount on this.......
Recommended Products
$10.98
$ 4 .99 $4.99