Your cart is empty.
Your cart is empty.Savage, Rascal Scope Mount Base, Blue Finish
Kuroshio
Reviewed in Canada on March 4, 2025
Fits perfectly fine on a little rascal
Robert L. McKinniss
Reviewed in the United States on February 2, 2025
Good product and good price
Colin Brittan
Reviewed in Canada on July 12, 2024
Exactly what I needed.No issues.
ZildjianMan
Reviewed in the United States on June 6, 2024
They do work well and feel sturdy. A couple hundred rounds of .22 and they remain set. I would like them to not sit so high. Though, this would exacerbate the issue I describe below. Even with low rings, it requires my kids to lift their cheek off the buttstock. I too must lift my head some. I will have to build them a cheek rest for their Rascal. Not many options, if any, out there for a quality set of bases for the Rascal.One important note: even though these are specific to the Rascal, I did have to take the rear most scope ring, on its right side (bolt handle side), and gently grind a beveled edge to the scope ring base - the edge of the clamping portion of the base. It was impossible to full open the bolt handle upward prior to putting it to the grinding wheel. Maybe 1mm of clearance would have allowed the bolt handle to open, albeit narrowly. So, I ground a beveled edge of about 2mm which allowed some wiggle room for the bolt handle to operate. No big deal, and you could do this with a standard iron file from the hardware store (just smooth it out when done reducing material).Scope rings used were Vortex.
Sam lambert
Reviewed in the United States on December 29, 2024
Fits as it should and im so glad it came with replacement screws aswell. Very well built. And the price is fair compared to competition
Customer
Reviewed in the United States on December 25, 2024
A must have if you’re mounting a scope on the Savage Rascal .22 lr gun.
Dave
Reviewed in the United States on April 7, 2024
Don’t waste your money on one piece mounts for the Rascal. The one piece mount covers the ejection area preventing the round from being ejected. Also hinders loading a round as well. Firearm needed to be turned over every time to get the spent case out because the mounts block ejection. These two piece mounts are perfect
Sonny Ohara
Reviewed in Canada on November 8, 2023
Aucune difficulté à installer les rails Picatinny sur ma Savage Rascal 22lr
B. K. Stucky
Reviewed in the United States on April 11, 2023
I have a Savage Rascal Youth that was needing a scope so I ordered this pair of scope adapters to install CVLife 4X32 scope ( the newer model with longer eye relief and larger eye-box, purchased here at Amazon) These are actual Savage adapters and I had no trouble installing them to the gun. The scope rail height is a significant distance above the line of the barrel in order to allow bolt clearance, so I figured I would need to get low profile Pica-tinny mounts to attach the scope as close to the barrel as possible (without touching, of course). It turns out that the Savage adapters are actually Weaver mount so I had to get scope mounts that are compatible with both Weaver and Pica-tinny. (Also from Amazon) The scope mounted without a problem and the bolt clears the scope rings although it is close at about 1/16 inch clearance. My only complaint is that I wish the mounts were a little longer so that the scope had more adjustment forward and back.
Jason
Reviewed in the United States on June 28, 2022
I bought this because the little peep sight on my daughter's rifle wasn't that great. Found these and it fit the rifle perfectly and then I was able to attach a cheap scope to the rifle for shooting up to 50 yards. If you have Savage Rascal these will fit it.
Pudloo Qiatsuq
Reviewed in Canada on August 12, 2019
I have the order and it's great thanks
Curtis W.
Reviewed in Canada on October 13, 2019
These are as advertised. I mounted a red dot scope on Rascal with no issues.
Harry Moto
Reviewed in the United States on May 15, 2016
Good fit, nice addition to a terrific little dude's (or dudette's) rifle. My grandson is right handed, left eye dominant, not quite 6 years old. We were struggling to get him comfortable with the iron sights on our new Savage Rascal 22 because of that. I added these scope mounts and a red dot sight, now you should see him glow as he knocks down pop can after pop can! I also added a 6 to 9 inch bipod (very small) and the little Rascal 22 bears a strong resemblance to Grandpa's 308 with bipod and big scope. (See picture)In a case like this, the red dot sight can act like the early occluded red dot sights where you can't see Through the sight, you only see the red dot. He sees the red dot with his weak eye and the target primarily with his right eye, but the brain connects the images flawlessly so that in effect it works the same as if he was right eye dominant. To him, you just put the red dot on the pop can and you have success.So that was a bit of a digression, back to the mounts. Not much to say, perfect fit, correct screws in the correct length, the two piece design leaves plenty of room to get at the bolt and loading area. Very small price for a nice quality fix.
Recommended Products