Shopping Cart

Your cart is empty.

Your cart is empty.

Split-Phase Solar Inverter 10000W 48V to 120V/240V, UL1741 10000W Inverter Built-in 200A MPPT Controller, Support up to 6 Unit Parallel, for Lead Acid Lithium Battery and Batteryless Run

Free shipping on orders over $29.99

$1,686.92

$ 99 .00 $99.00

In Stock

About this item

  • 【NEW-PARALLEL VERSION】Split-phase Solar Inverter 48V supports split-phase and single-phase pure sine wave output. One 10k inverter can also output 120V and 240V simultaneously through different connections. Upgraded Version - supports parallel operation for capacity expansion up to 60kW, max 6 power inverter parallel
  • 【MULTIFUNCTIONAL SOLAR INVERTER】10000 watt Solar inverter 48V is a new type of solar energy storage inverter control inverter integrating solar energy storage & utility charging and energy storage, AC sine wave output. Dual MPPT with 99.9% efficiency and maximum 22A current in a single circuit, perfectly adapted to high-power modules. Supports two solar inputs and simultaneous tracking of two solar maximum power charging /carrying capacity functions
  • 【10K INVERTER BUILT-IN DUAL MPPT】Dual MPPT with 99.9% efficiency and maximum 22A current in a single circuit, perfectly adapted to high-power modules. Supports two solar inputs and simultaneous tracking of two solar maximum power charging/carrying capacity functions. Support split-phase and single-phase pure sine wave output
  • 【COMPATIBLE WITH VARIOUS BATTERIES】10000W 48V split-phase power inverter is compatible with AGM, Gel, Lead acid, Lithium-ion, and LiFePO4 batteries, and support batteryless. Supports solar, utility, or generator power to charge the battery. It can flexibly schedule the Inverter charging and discharging time. With a dual activation function when the li-ion battery is dormant; either mains / photovoltaic power supply access can trigger the activation of the Li-ion battery
  • 【TECHNICAL SPECIFICATIONS】Hybrid Solar Inverter 48V built-in 200A MPPT controller and 10KW Pure sine wave inverter. Rated Output Power: 10000W continues (Surge 20000W), Rated Output Voltage: 120/240Vac (split phase/single phase), Switch Time: 10ms, Max.PV Input Power: 11KW(5500*2), Max.PV input Voltage: 500Vdc, Max.PV input current: 22A, PV Starting voltage > 150V, PV Wire:10AWG. Support CAN, USB, and RS485 communication
  • 【CHARGING MODES AND TIME CAN BE SET】10KW Pure Sine Wave Solar Inverter Charger has 4 charging modes that are optional, i.e. solar only, mains priority, solar priority, and mixed mains/PV charging; and with two output modes of utility bypass and inverter output, with uninterrupted power supply function
  • 【360° PROTECTION AND APPLICATIONS】PowMr's 10000W Solar Inverter with complete short circuit protection, over-current protection, over-under voltage protection, overload protection, backfill protection, etc, is ideal for off-grid backup and self-use applications. Widely used for home, cabin, camper, RV, trailer, boat, and so on and used as backup supply while utility outages
  • 【Tips】 The packaging only includes the inverter, Parallel communication cable, 2 * Battery Terminal Lugs, 2 * M5 screws, and instructions, and does not include WiFi modules/ batteries/ adapters/ batteries/ plugs/ wires/ cables. If needed, please make an additional purchase!



Product Description


Emilio
Reviewed in the United States on February 26, 2025
Muy buen equipo
David Hahn
Reviewed in Canada on September 18, 2024
Don’t cheap out, can’t afford a name brand unit, just keep saving. Buying this unit is like giving $100’s of hard earned money to a stranger. I have had this unit for over a yr. It truly may have total of few hundred hours of being used.The unit is our guest cabin, where the kids come to stay when they visit. At first the unit worked as needed, it would even run power tools. But as the uses continued so did the error codes and all interrupted power. It would randomly just turn off, drained power rapidly when just sitting unless turned off. Then the solar controller would stop and throw 3 or four codes. Finally gave up and bought a Victon solar control charger and it worked flawlessly and was way more efficient. So I thought ok at least I have a working inverter and a/c charger- nope now the maximum draw is about 500 w before it shuts down and throws a code.It is convenient to buy an all in unit but as different parts fail you just can’t replace those pieces, save yourself a lot of frustration and money and save up and buy quality components
Neal S.
Reviewed in Canada on October 19, 2024
works as expected.
POMMETTE beauty
Reviewed in Canada on September 17, 2022
This thing is phenomenal. Install was a breeze because the instructions were very simple and easy to read. Setting up the unit was also extremely easy when following the instructions. I have the 3000w version and it powers everything in my off grid cabin while charging my batteries. There really isn’t much better value for a hybrid inverter than this.
george
Reviewed in Canada on December 5, 2022
This unit is excellent. Yes, you should go through all of the setup options to optimize your battery system. Just plug in the values provided by your battery supplier.Mine is a 24V Lithium system. I had been using a Renogy 30A charger (worked fine once I figured out the battery settings properly but no transfer function). I had a separate inverter which would "burp" when the Renogy disconnected the Batteries, causing intermittent disconnections. Renogy were unhelpful. I eventually switched to this system and am delighted. I run an external charger to the battery when on the road in Solar mode. This is very effective when the sky is overcast. Usually when I arrive at a campsite with a 120V connection, I switch to UTL mode from SLR, but the system is able to figure things out for itself. Personally, I am using this in USB mode when plugged in, but APL mode works just as well.The only negative comment I would add is that the company does not provide a screw for the inverter output ground. It seems to be a metric thread. I am looking for an equivalent screw, since I would like to have a system ground on the inverter output.Others have commented that the fans are a bit noisy. Over 1kW load results in the fans operating - and they are not particularly quiet. I may replace the OEM ones with super-quiet computer ones, but don't want to do that if it is going to mess with the warranty.
pen
Reviewed in Canada on April 5, 2022
Works very well, the only reason I didn’t give it 5 stars was that the settings are difficult to figure out. Maybe if this is not your first inverter you would have an easier time? There are 38 settings that have to work together to get it do what you want. Eventually I got it set and will probably not need to change anything for a long time. Overall a good value.
Recommended Products

$11.95

$ 5 .99 $5.99

4.6
Select Option