Your cart is empty.
Your cart is empty.A MUST FOR EVERY GUN DEALER, GUNSMITH, SHOOTER & COLLECTOR This special alloy is "Harder than Rust but Softer than Bluing." It will clean down to the original surface on blued guns, and other arms & armor. FRONTIER METAL CLEANER is used the same as you would use ordinary steel wool. After cleaning, apply a light coat of oil. If rust has completely penetrated and pitted the original surface, nothing short of buffing and reblueing can remove it. (Caution - Reblueing will reduce the value of antique and collector items). This Metal Cleaner is NOT recommended for cleaning cold blued surfaces, anodized aluminum or brass. It does an excellent job cleaning bullet moulds, loading dies, etc. For best results, replace periodically, as the ribbons of metal (like razor blades!) will dull through use. Try Frontier Metal Cleaner on dirty bores. DE-LEAD BORES FASTER THAN YOU CAN LEAD THEM UP. To add to Frontier Metal Cleaner’s versatility, it is extremely effective at removing lead deposits from the bore, it goes a long way toward cleaning copper buildup as well. You will be amazed with the results. Takes care of your largest and smallest cleaning problems. Handguns, Rifles and Shotguns, any size, any gauge! THOUSANDS OF SATISFIED CUSTOMERS. Dealers and individuals have made hundreds of dollars on just one package from adding value by cleaning. SINCE 1967
Jim
Reviewed in the United States on January 31, 2025
You will not be disappointed !
Tyler
Reviewed in the United States on September 21, 2024
I really can't believe I haven't heard of this product before. After I saw a guy on YouTube boast about this, I had to try it. And holy **** is it the best $7 I ever spent. This stuff will bring an old, rusty barrel back to life in a way I thought wasn't possible. Not only that, but you can use it to remove rust anywhere on your gun and it won't damage the finish, at least on blued guns. Now that I know about this stuff, I will never be caught without some on hand.
horace baskette jr.
Reviewed in the United States on July 18, 2024
I use this around my copper brush to scrub the inside of a gun barrel to remove powder and plastic. Works great.
Jacob Torres
Reviewed in the United States on June 6, 2024
I just kept scrubbing and the rust just kept coming off. Finish looks closer to factory than it has in years. Wiping on a SMALL amount of gun oil and fully wiping it off between scrubs really accelerates the process. This one roll should last me a good while, as it should for you as well unless you're fully restoring multiple guns at once.
Vince
Reviewed in the United States on June 28, 2024
Interesting product. Removes rust and doesn’t affect blueing. Does what it pro-ports to due and I have no problem recommending.
FAS
Reviewed in the United States on March 29, 2024
This stuff is amazing! My great grandfather’s shotgun had sat in a closet for years and had rust all over the barrel. It took some effort, but it removed most of the rust and none of the bluing. I’m proud to display it once again.
Randall Dunkley
Reviewed in the United States on October 13, 2024
The product was recommended to me by another person. I received the product and tried it out on two antique rifles, an 1888 Springfield and a 1939 VZ24 Mauser. One bore was ok, and the other was dark. Both cleaned up to a remarkable degree. Shiny in the one rifle and very much improved in the other rifle. The test rifle types both have a history of using either corrosive powder or primers in their original ammunition. I was very impressed with the results; however, I think the product can be improved by designing a bore brush using this type of material as it is difficult to cut the pad into a proper size and attach it through the cleaning rod eye. I have heard of steel wool being used in a similar way to clean bores, this material looks like Titanium wool or something similar. No mention is made of using the product in application with water or a solvent to increase the capability. Overall, it is a recommended product.
Joe Lopez
Reviewed in the United States on December 13, 2023
I read about this material on a website where it was highly recommended. I had a lead build up problem in a pistol that was fairly new, the build up was persistent enough that I wrote an email to the manufacturer about it, but that's another story. Long boring story short, this stuff cleaned my barrel's bore perfectly. It really scours out all of the build up and left the bore almost perfect looking. The bore scope verified this and I have not had any lead fouling problems since! I too can recommend this material, just follow the instructions. Great value with excellent results!Old man Joe
Recommended Products
