Your cart is empty.
Your cart is empty. Specification:
Item Type: LED Chips
Material: Aluminum
Color: As shown in the picture
Model: AXD-1W-5V
Size: Approx.20x7mm/0.79x0.28in(D x H)
Weight: Approx.46g/1.6oz
Application: LED lamp bead
Power: 1W
Voltage: 5V
Quantity: 25 pcs
Brightness: 200LM
Application: Suitable for flashlights, DIY modeling lights, headlights, spotlights, and many other lighting products.
Package List:
25 x LED Chips
Note:
1. The lamp bead is welded to the aluminum substrate, and the thermal grease has been applied before welding, and it only needs to be directly processed for heat dissipation.
2. It is not waterproof, and the load cannot be exceeded, and the heat dissipation temperature of aluminum material should not be higher than 60 .
3. Please allow 12mm error due to manual measurement. Thanks for your understanding.
4. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Cory Poole
Reviewed in the United States on January 27, 2025
I've purchased this product twice and have used the leds in several applications.I've never run them over 5v and always had them mounted to heatsinks. I've learned that if they are run continuously ( 8 hours per day )The lenses will fog and then turn brown blocking most of the light. They work fine for applications where they are turned on infrequently.
RHKern
Reviewed in the United States on March 7, 2024
Feb 2025 update - these have turned brown after a few months of use.Needed some 5V UV LEDs to light up my uranium glass collection and these worked perfectly. They get quite warm so it's wise to use a heatsink with proper mounting (I'm using 40mm square x 11mm and heatsink adhesive). Definitely 1W power - measured 5.14V @ 225mA so a little over 1W power consumption.
Win Dou Browser
Reviewed in the United States on December 4, 2024
The media could not be loaded.
Net Shopper
Reviewed in the United States on November 10, 2023
Good for holiday or small projects
Product User 777
Reviewed in the United States on January 24, 2023
This button LED is used for things that you can not get a large heat sink into. And it gets so hot that it melts it's own solder joint and falls off it's base/heatsink.
brandt
Reviewed in the United States on July 8, 2022
I used the LEDs to light up a piece of quartz rock. They work well using a solar panel that was used previously for garden lights!!
Mark R Cordes
Reviewed in the United States on November 18, 2022
These are older generation LEDs that run way too hot (can easily burn yourself) not recommended unless planing to mount to heat sink fins.
Recommended Products
