Your cart is empty.
Your cart is empty. These led lens has different beam, help to focus the light into a tight spot.The edges of the lens are are not sealed all that, you need to fixed the assembly to the LED.
Widely use in for LED spot light, automobile lights, DIY projecting lamp etc.We have stock of other degrees, if you need, please check in our store.
Steve G.
Reviewed in the United States on April 12, 2024
Work good 👍
jose antonio guzman 01-012842
Reviewed in the United States on January 23, 2023
Muchas Gracias
Harper 20
Reviewed in the United States on December 19, 2022
I know these are repeated designs for the same product under other names, but the design of these makes using some star boards difficult. The slots in the lens holder fit nicely around the legs of the LED on the board, but there's no space there for adding power wires, which are always off axis from the LED legs. I always have to Dremel out the bottom so the lens fits flush on the LED, which it needs to do for the LED to function properly.The lenses are fine. Definitely not high optical quality as there is some fringing and rings in the field, but that's to be expected with this type of lensing.
SpaceCoyote
Reviewed in the United States on November 11, 2022
Exactly as described.
John Panzarella
Reviewed in the United States on January 14, 2022
Used them in a 3d printed light setup with 1 watt LED. Got both 60° and 90° much better than just a straight LED chip.
Darren
Reviewed in the United States on August 2, 2021
I wanted a lens to focus an LED, and was surprised that they were so easy to find! Here they are, and they work! They fit snugly on your typical 1-5w LED, and do a good job of focusing the beam.I'm using it for a searchlight on an RC helicopter, but it would make a good DIY flashlight too
Terry Lee
Reviewed in the United States on November 22, 2021
These work pretty good, they are plastic lenses. Ok for 5 watt emitter in flashlight application with enough heatsink.
peter e stacey
Reviewed in the United Kingdom on February 23, 2020
Perfect angle of light from a bright led with these lenses. Great items.
Eric
Reviewed in the United States on August 7, 2019
I bought the 120 degree lens for adding 6v LEDs to a cargo bike. They are smaller, 5mm LEDs without a circuit board. These seem to be made for an LED mounted to a circuit board, but will still work for my purposes. I’ll have to find something that fits the housing and just hot glue/epoxy it all together.Overall the light output seems to be a bit better focused in the center, and has a larger spread. It does make the LED look better froma distance. I’m sure one of the more focused beams would help more, but I wanted the wider field of view.
Recommended Products
