Your cart is empty.
Your cart is empty.Product Description
The LENOX Tools Bi-Metal Speed Slot Arbored Hole Saw with T3, 2-3/8"-60mm, has enhanced tooth geometry that cuts 50% faster than previous LENOX hole saws. Twice as durable as our previous generation when cutting through metal, this bi-metal hole saw with a standard arbor features thicker walls to minimize tooth loss and improve durability. A staircase SPEED SLOT has a wide slot placed low on the hole saw and multiple leverage points to make it easy to work plugs out with a screwdriver. This design effectively removes sawdust and chips and helps prevent plugs from becoming stuck in the saw. 10% taller than previous models, it delivers cleaner cuts through two-by lumber.
From the Manufacturer
The Lenox Tools 1772953 38A Bi-Metal Speed Slot Arbore Hole Saw, 2-3/8-Inch outperforms all competitors in wood cutting, plug removal, and metal cutting applications. The patent pending Speed Slot features a staircase design for easy plug removal. The slot is wider than most and is placed lower on the hole saw with multiple leverage points to easily eject the plug with a standard screwdriver. The hole saw is 10-percent taller than the previous model to deliver cleaner cuts through two-by lumber. The Speed Slot efficiently removes saw dust and chips while producing a fast cut and preventing the plug from getting stuck in the saw. The new hole saw also features up to twice the life of the previous model when cutting metal. An enhanced tooth geometry, a thin kerf design and an advanced coating contribute to the efficiency of the cutting process by removing material faster, therefore generating less heat while cutting.
P. Buchanan
Reviewed in the United States on February 24, 2025
It's been a good hole saw blade so far, we use it to cut holes for rain gutter downspouts. The teeth are starting to round out a bit though, but otherwise it's been a good blade.
Spencer Guittar
Reviewed in the United States on September 4, 2024
I used it to drill a hole through a metal ikea cabinet base and it worked great, even with my crappy low powered drill. It got the job done and didn’t seem to dull at all.
Tennessee Gentleman
Reviewed in the United States on December 28, 2024
Everything you need to install the Doors cope DOO 2000 peep hole in your door. Only thing you have to supply is the electric drill. This kit comes equipped with a center bit of 1/4" size for the pilot hole. I have no previous experience using hole saws but had no trouble making the required hole. My only problem is, the wood block drilled out by the metal blade is most thoroughly stuck in the saw blade itself, and I have no idea how to remove it if I ever want to use it again.
Club Sandwich with Fries
Reviewed in the United States on January 1, 2024
This was recommended to me by an online greenhouse group to cut an inlet for the Ikea indoor greenhouse. It worked just as advertised. Nice clean cut without having to use oil.
Odelia M. Patterson
Reviewed in the United States on April 15, 2024
We bought this to add a larger peep hole to our front door. This was the size required and it worked like a charm on a solid wood door.
Segree Isom
Reviewed in the United States on December 5, 2023
I used it to install a door viewer! Made it very easy and it was simple to use.
Customer
Reviewed in Canada on August 4, 2022
Great product and priced very well ..Worked perfectly .
Customer
Reviewed in Canada on September 16, 2021
It's as described in the product listing, and worked great.
Nigel
Reviewed in the United States on August 15, 2021
Drilled 33 holes in 5/8" plywood, still sharp on the last hole. Took 10 to 15 seconds for each hole. Plug remove feature worked very well. The arbor came with the hole saw and unscrews, so I expect it would work with other Lenox hole saws.
fUNWiThTyPiNg
Reviewed in the United States on January 28, 2019
Purchased to cut out the bottom of my porta filter in my espresso machine. I have an old Simonelli with e61 group head. Removed the spout at the bottom of the filter in a vice. This cutter had a guide bit in the center, which helped positioning the cut. These portafilters are solid brass? But the cutter went through cleanly with just a cordless Makita drill. Modifying an old portafilter this way was much cheaper than buying a new bottomless one, and this modification removed the worst bits of stain in the old one.
Gary Allen
Reviewed in Canada on March 6, 2017
Perfect size for the Anova Precision Cooker. Just cut a hole in the top of a plastic lid, and the machine slides down and rests on the lid perfectly!
Recommended Products
