Your cart is empty.
Your cart is empty.Product Description
Our mission is to develop high-quality offroad accessories while providing exceptional support and throughout the buying process and beyond. We are based just outside Minneapolis, MN, and distribute across the U.S. and Canada. We are the proud headquarters of a wide variety of brands, including DENALI plows, VIPER winches, FIRESTORM heaters, IMPACT Implements, HIGHLANDS cargo and more!
As the sole manufacturer of our products, we design, test, and innovate new solutions using highly skilled engineers and the industry experience necessary to source the best materials for our products–MotoAlliance blends new-school innovation and old-school quality to deliver top solutions for our customers.
Each product is made with a deep sense of pride, and because we bypass distribution sites, we can bring these products directly to you – resulting in a lower cost while maintaining top quality. Don't hesitate to ask us questions, and know that we will stand behind our products. Happy riding!
Customer
Reviewed in Canada on March 24, 2025
You will need to purchase a couple connectors to use these with the atv. Was difficult to figure out what I needed. I just brought both pieces to the farm equipment shop and was set up with my needs pretty quickly
Luc Cantin
Reviewed in Canada on March 23, 2025
Juste got IT assembled can't Wait to use it
Richard M.
Reviewed in the United States on March 2, 2025
The bracket that attached to the receiver broke and bent within the first hour while trying to grade gravel drive. That point of attachment needs to be the strongest, but in this design it is the weakest and most vulnerable point for failure.
Hoot from Carson City
Reviewed in the United States on July 8, 2024
This heavy-duty hitch works great even on my Deere Lawn Tractor. Now I can add implements of different kinds without a large full-sized tractor to do it with.
Henry
Reviewed in Canada on May 24, 2024
Never received all parts
rich
Reviewed in the United States on February 16, 2024
Really well built. Not a piece of junk. Built to last.
Allen
Reviewed in Canada on December 29, 2024
ok
John Barrett
Reviewed in Canada on November 20, 2024
I think it will be a great tool.,welds were not fit orfinished just right.Other than that really solid equipment.Thanks. Adjustment 3 sided plate would not line up due to welds and radius of tube didn't work out.Larger tube say 2x3 and possibly slight up down slot and also using sleeve and grade 8 bolt. Thanks again John Barrett
Jay
Reviewed in the United States on October 26, 2024
Heavy duty unit, simple to assemble. I just needed to add extra washers in between te hinged arm lift. The spacing helped a lot.
Mike williamson
Reviewed in the United States on April 15, 2024
The media could not be loaded.
Kwhammer
Reviewed in the United States on July 27, 2023
After reading some negative review I was reluctant to buy this. I found it to be well designed and it works well with the box blade. Be sure to lubricate the mainnscrew before use.
calling4life
Reviewed in the United States on February 10, 2023
Tighten the bolts properly, if you go too tight it won't move, too loose and it may fall apart, this isn't rocket surgery, but if you put this together and nothing moves, you've messed up.Also, find grease that works for your temperatures, I'm in Northern MN so I needed something that works to -40 or so, and I have that in a grease that works from -75 to over 500 degrees.Grease the threaded rod, a lot, now wind it up and down completely a couple times, now grease it a lot again... if you've used good grease this thing should be smooth and simple to operate, it's amazing what grease can do.Throw it in your rig, see how it sits, adjust height and go, but with the understanding that this isn't a $2k attachment, it's $200, so your truck in 4lo with the 454 big block and 54" mud boggers will tear it apart if you don't mind your throttle. Side load isn't going to be great for it, look at it, should be obvious.Just keep that stuff in mind and maybe slow down when needed, be a little more careful in those areas...Also, add weight racks or bins or whatever to the implements and add weight to them to get them to work better, really torquing down on this arm and using the implement leveraged against vehicle will wear hard on this, you can do it, but adding weight to the implements would be a far better plan. Let that weight get them to dig down, scrape the driveway easier and so on, instead of torquing this arm till it screams.So, it works... After greasing and running her up and down a few times, she's smooth, easy to operate, quick.I actually use it with my truck, using the blade to pull snow at the moment.Updated 12/15/23: Ordered another one point lift as the bolt holes broke on one part of the first, that's fine enough, I'll live.What isn't fine is that the new one came missing major pieces, I was able to pirate them from the broken one, but this thing was packaged abysmally, I don't even understand how a person would do this and send it out and think it's remotely ok.So, down to 3/5 stars. I now see they have an updated Heavy Duty version of this lift, would have gone that route but a moot point now, imagine I'll go that route in the future though.
S. Neumann
Reviewed in the United States on June 16, 2019
First of all, this thing is HEAVY! But it's super easy to put together like a big erector set. My problems began when I went to actually install it onto the hitch adapter. The hitch on my Grizzly is TOO LOW for this unit. No matter what I did to raise the hitch to get clearance and crank the lift up as far as it would go.......I was still not able to get the cultivator off the ground. So I detached it, added a 3 way hitch to gain lift, TURNED THE WHOLE LIFT AROUND, and installed it that way. That gave me the lift I needed plus the clearance needed to still be able to turn the lift/lower handle without hitting the back cargo rack. Like others have noted, this is a very sloppy linkage to begin with, so with the added hitch it just gets sloppier. But as you can see from the photos it still does the job I needed it for - busting up grassy over grown raised beds. The ground is uneven, I suspect once I get it flat things will move much smoother. Even though it didn't go on easily and I had a bit of a panic when it wasn't setting right, I don't regret this purchase and it sure beats doing all this by hand! If you're looking to do harder and more in depth work, I strongly suggest a 3 point solid hitch for the attachments.
Recommended Products
$25.99
$ 11 .99 $11.99
$140.90
$ 66 .99 $66.99