Shopping Cart

Your cart is empty.

Your cart is empty.

Flotec FP4012-10 1/2 HP Shallow Well Pump Jet

Free shipping on orders over $29.99

$254.76

$ 99 .00 $99.00

In Stock

About this item

  • Built-in shallow well pump jet ideal for wells with pumping levels of 25-Feet or less
  • Offers superior performance at capacities to 10 GPM at 40 PSI
  • Fiberglass-reinforced thermoplastic provides incredible corrosion and sandy water resistance; dust-proof cover protects all electrical components from dust and insects


Product Description

Flotec Jet Pump, Shallow Well, 8 gpm, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 25 ft Head, 1/2 hp Power, 230/115 V, 60 Hz, 9.4 A, 77 psi Case Pressure, 140 deg F, Thermoplastic, Standards: CSAus Certified, For 0 - 25 ft Deep Wells. Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM. Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.

Amazon.com

This 1/2 HP, built-in shallow well pump jet from Flotec is ideal for wells with pumping levels of 25 feet or less. Featuring a corrosion-resistant nozzle and venturi, this model offers superior performance at capacities to 10 GPM at 40 PSI. It works by self-priming after the pump housing is initially filled with water. The fiberglass-reinforced thermoplastic construction provides incredible corrosion resistance, as well as resistance to sandy water. The dust-proof cover protects all electrical components from dust and insects, thus resulting in a longer-lasting motor. With a stainless steel shaft, heavy duty ball bearings, balanced rotor, mechanical shaft seal and insulated motor windings, the pump's powerful motor delivers non-stop operation for years to come.


John
Reviewed in the United States on January 27, 2025
Id give 5 but I haven't hooked it up yet. But I'm a replacing the very same model with it. Other one worked great until my water froze and it started leaking from inside the casing. I blame myself. So I'll give 4.5 stars just because I ordered it one day, and it was literally here the next. It was delivered before I had even been notified that it had shipped lol.
Ted D.
Reviewed in the United States on October 13, 2024
I ordered same size and model as existing irrigation pump. That way I do not have to change plumbing/electrical setup. Previous pump runs about 10 hours a day during hot, dry spring and summer months. I expect this pump will be as dependable and price is reasonable.
MikeK
Reviewed in Canada on September 23, 2019
I use it for my drip irrigation system.
Rejeanne Melnick
Reviewed in Canada on July 1, 2019
works great will buy again
Cory W
Reviewed in the United States on June 26, 2019
This pump was installed to pump water from a cistern to supply a small cabin. Can’t speak to the durability but works great as of now. Nowhere in the description was there any info regarding the sizes of the inlet and outlet. This pump is a 1/2 hp 115v, others may vary. It has 1-1/4” female pipe thread for the inlet. 1” female pipe thread for the outlet. Drain valve is 1/4” female pipe threads if you plan to install a valve as I did to drain for the winter months easily. Hope this helps.
robert
Reviewed in Canada on November 23, 2018
Easy to prime and was the only pump I tried which would start when on my 3000 watt generator. Many pumps draw a lot of power when they turn on and they may not start. This pump starts easily.
Gerard Luttmer
Reviewed in Canada on November 19, 2018
Great quality product
Customer
Reviewed in Canada on August 27, 2017
had to re-configure my pump house as the inlet is 3inches higher than the old flotec
HogTaters
Reviewed in the United States on November 20, 2017
Love the pump. Decided on this one over cast iron versions because I hate the rust that cast iron pumps puts in your water.Pump builds pressure quickly, runs quietly, no leaks whatsoever, and has made my deer camp experience so much better since I’m no longer having to pump water from my 55 gallon barrels into my storage tank on my 5th wheel.Running a 14 gallon pre-pressurized well tank and I’m pulling water from 275 gallon totes.Will update later on to ensure pump is running as it should.
Customer
Reviewed in the United States on April 17, 2017
So far so good. I installed this pump to boost the water pressure in my house coming from our submersible well pump and through 2 filters & a softener. Easy set up and once I got both pumps working together it seems to do a pretty good job. One thing that confused me during set up was the directions did not indicate which contacts on the pump should be hot and return. So, I just connected it and hoped for the best figuring if it pumped backwards I would just switch the connections. Doesn't seem to matter though. The pump runs relatively quiet. Can hardly hear it from the basement when it kicks on.
E. Cady
Reviewed in the United States on February 2, 2014
I had previously bought a flotec pump about 14 years ago. It survived for 12 years in the Philippines, enduring some of the worst abuse a pump could possibly endure and continued to work. Finally, the motor bearings failed and replacing the motor was not an option. I have had several pumps bought locally that could not survive a year, and all cost more than this flotec pump. Even with the cost of shipping this unit to the Philippines, it will be more cost effective and durable than any I have bought there.
Joanne H
Reviewed in the United States on January 8, 2012
The media could not be loaded.
genral299
Reviewed in the United States on July 17, 2011
I purchased this pump to replace my 10 year old pump which was damaged during the winter months.I needed to purchase one fitting at the local hardware store for connection to the well pipe.The pump comes in two different voltages, 110v and 220v, I purchased the 110v model, since mine is a seasonal pump which is supposed to come inside during the winter months.This pump is working fine, the preset pressure of 50 psi is more than enough for my outdoor water needs: Lawn sprinkler, garden watering, adding water to the pool and car washing to name a few.Replacement was easy, remove two bolts, disconnect the old motor lead in wires. Put the new pump on the tank, attach the bolts, connect the lead in wires and a few easy plumbing connections, I was done in about an hour.