Your cart is empty.
Your cart is empty.This air door actuator directly replaces the original actuator on specific Chrysler vehicle years, makes, models, configurations and positions to restore proper HVAC operation. After installation, this actuator requires recalibration using an appropriate scan tool. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don't know which actuator position you need to replace, consult a qualified service technician. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Chrysler Aspen: 2007, 2008, 2009] - [Chrysler Cirrus: 2001, 2002, 2003, 2004, 2005, 2006] - [Chrysler Sebring: 2001, 2002, 2003, 2004, 2005, 2006] - [Dodge Durango: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009] - [Dodge Ram 1500: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009] - [Dodge Ram 2500: 2003, 2004, 2005, 2006, 2007, 2008, 2009] - [Dodge Ram 3500: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010] - [Dodge Stratus: 2001, 2002, 2003, 2004, 2005, 2006] - [Dodge Viper: 2003, 2004, 2005, 2006, 2008, 2009, 2010, 2015, 2016, 2017] - [Ram 2500: 2011, 2012] - [Ram 3500: 2011, 2012] - [SRT Viper: 2013, 2014]
Mopar Mechanic
Reviewed in the United States on August 22, 2024
They never calibrated and lasted about 3 months. I used a factory scan tool to calibrate it and they won't calibrate.
Dan
Reviewed in the United States on August 12, 2024
Bought one from O'reilly and still made pop noise. But this one work great.
Mandy Smith
Reviewed in the United States on March 3, 2024
this was an easy install but was not my issue, so I returned it.
matt p.
Reviewed in the United States on February 3, 2023
Great product same exact from AutoZone but cheaper price
MattofallTrades
Reviewed in the United States on December 27, 2023
After first swapping this out with the original oem one that died, I noticed this one did work and fit, but it seemed like it would never self calibrate correctly. When set to full hot, you could hear the actuator trying to turn a little too much. When you would then change to mix of hot and cold, it would still be fairly hot. When you switched to full cold, you could hear it again over tightening on the gear. What ended up working for me was taking apart both the oem and this one, desoldering the wires on this one's motor, and then swapping the motor over to the oem case and gears (the oem set up is not soldered, simply using pressure against a connector). I also had to swap the cork screw gear off the motors with each other. Once I put the oem case with this new motor in, it self calibrated correctly and now working as expected, blending temperature accurately. I'm going to assume the gears are geared different between this one and the oem one. Even the inside of this one looked slightly different with the motor in another orientation.
Robert workman
Reviewed in the United States on July 17, 2022
Its exactly what I needed fast shipping . thank yoy
chris
Reviewed in Canada on December 28, 2020
Came quick, but wasn't part for my truck..amazon good about return..when they receive will refund.
Ted J
Reviewed in the United States on November 24, 2019
Easy to install, work perfectly.
Donavan VanMol
Reviewed in the United States on August 12, 2016
Installs easily product is as described. Has been installed for a month now with no problems
Recommended Products
