Your cart is empty.
Your cart is empty.Product Description
Why Choose Briidea Sump Pump Battery Backup System?
Briidea is a manufacturer with professional technology and almost 20 years of experience in intelligent automatic control equipment production. We build up our own product development team. We believe the true destination of technology is to make life better and easier. To assure the highest products possible from beginning to end, we never stop our steps on the way to exploring and developing
Built-in cooling device
The BriideaSump pump battery backup system uses a built-in fan and forced air cooling, so please keep the ventilation openings unobstructed when using it
Recommend using AGM deep cycle batteries
If you use lithium iron phosphate battery, you should pay attention to the protection of the battery management system. For example, if you use a 12V 100AH lithium iron phosphate battery, due to BMS protection, the actual output capacity of the battery is only 1200 watts (ideally). At this time, the pump will probably fail to start
Flexible installation method
Make installation a breeze with our battery cables and mounting screws!Whether it is horizontal or wall mounted, you can choose freely to achieve flexible installation that meets your needs
Backup Power
Briidea sump pump battery backup system has a built-in 12A battery charger that supports fast charging for various battery types, trickle charging, and full maintenance mode. Pure sine wave inverter technology efficiently and stably outputs 110V AC voltage, eliminating power outage worries for your monitoring devices, phones, lights, and other equipment
Pat R.
Reviewed in the United States on January 4, 2025
This is exactly what I was looking for, I did have an issue with the converter went out. I contacted them and they stand behind there products and sent me a new one. Great product and great costumer service! Would highly recommend.
CHRIS
Reviewed in the United States on April 3, 2025
Super easy installation...works exactly like it should...highly recommend, im an electrician..if u can read u can install this in 15 minutes or less
Mrs Doc
Reviewed in the United States on August 22, 2024
Allowed me to add a 12V marine battery and plug in sump sump and freezer. Good quality and easy to use.
Roc
Reviewed in the United States on August 11, 2024
When I took it out of the box I could hear pieces rattling in the case. The heat sink was loose in the housing. Quality control is very lacking in this product. I would not buy again from this company or vendor. If I had plugged this in to 110 Vac it could have been a safety Hazzard.
Lilia Ruther
Reviewed in Canada on February 22, 2024
Worked as advertised
Sylvain Gaucher
Reviewed in Canada on December 18, 2024
L’onduleur tombe en alarme de façon régulière. Selon moi il est défectueux. J’aimerais le retourner..
Larry Mooney
Reviewed in the United States on April 2, 2024
My 1st unit didn't operate as owner's manual described. I notified the Briidea customer support, explained my concern and they sent me a new unit. Very good support. The replacement unit is working as owner's manual states.
Rob
Reviewed in the United States on November 23, 2023
Paired it with a Lifepo4 battery but it would not charge it. A multimeter measured over 16 volts at the battery terminals so it was way too high and the BMS likely rejected it. This was on the AGM charge mode which the instructions says to use for Lifepo4 battery.There is a Lithium charge mode as well but it did not function at all. No LED lit up and no voltage output. The instructions offered no clear explanation on when it should be used other than to state 12.6v Lithium battery type, which should include Lifepo4 as well.When testing the actual inverter function, it did run a Zoeller M98 1/2 HP pump for several minutes at a time. That pump runs at 9 amps at about 9ft lift in my install. However, the inverter power LED would not light up so that was another fail.Maybe the one I returned was just a dud or an AGM battery type is a better match, but given that the warranty is only 90 days, the manufacturer must not have much confidence in the electronics either.
Recommended Products