Your cart is empty.
Your cart is empty.Product Description
Why use CO2 inflator
- It is frustrating to encounter a tire puncture while riding. After tire has repaired, it takes hundreds of repetitions to fill the tire with a mini bike pump. It will make you more frustrated. Fortunately, BriskMore CO2 inflator can save you in just a few seconds.
- Compared with mini bike pumps, CO2 inflator is smaller and lighter, save your saddle bag space.
- When you install tubeless tire system. If you don't have a floor pump with pressure over drive , CO2 inflator can help you.
Enjoy your riding
- Outdoor riding, enjoy more happy riding time.
- Group ride, reducing the time for your partners to wait for you.
- Timed race event. It can help you get back quickly to the race.
High quality CO2 inflator by BriskMore
- Beautiful appearance and decent. The weight is only 20G
- Original air-sealing structure. Precisely control the inflation speed and gas flow , easy to use.
- The shape and material of the puncture needle have been optimized many times, making it stronger and sharper.
- Ingenious spare parts storage design. All washers of CO2 inflator will wear out after repeated use.Although some other CO2 inflator are also attached seals. But only BriskMore storage design will find it easily when you need it.
- Compatible with Presta & Schrader valve. Threaded connection valve nozzle is more reliable.
- CNC machining, precise, reliable and long-lasting.
- Compatible with all UNF3/8 threaded CO2 cartridges. Comes with a Insulted Rubber foam sleeve(for 16g cartridges only).
- High quality CO2 bike inflator. Easy to use and quick fill.
Note:
- Don't deflate at people after installing the cylinder.
- CO2 will be very cold after inflation.
- After being inflated, the sealing ring of the sealed cartridge will expand. This is normal and will recover in a few minutes.
Customer
Reviewed in Canada on January 3, 2025
Simple and perfect for my toolbox
Jason
Reviewed in the United States on January 21, 2025
Replaced broken one (different brand). Used twice already. I like that you can leave pierced cylinder on and it doesn't leak.
Moises Reyes
Reviewed in the United States on January 14, 2025
I’ve used this inflator twice so far with great results. Easy to use and very reliable
bryan beyerle
Reviewed in the United States on September 13, 2024
Went ahead and used a CO2 cartridge at home before putting in bike bag. Trial, air up on a few old tire/tubes at the house. Worked well on schrader and presta tubes. The little throttle valve worked just fine, was able to start and stop flow no issues. Bought this to replace a very old CO2 inflator that I never really liked very well. The addition of throttle knob make all the difference. Not saying it is the best in the world, but is a real bang for the buck. Sometime we carry a Blackburn mini pump and CO2, I would be confident in carrying only this and a few threaded cartridges. Have not used out on the road/trail yet, would seem to be just fine out there also. B
Gooman
Reviewed in the United Kingdom on August 4, 2024
Well made. Better than the muc off version which I had trouble with, as it leaked soon as a cartridge was screwed on. Only issue I had which was minor after the first use. I found if you don’t turn the dial quickly not enough gas comes out to inflate the tyre. Worked second time I used it fine. Just turn the dial really quickly and it’s all good
Eppelm
Reviewed in Italy on July 19, 2024
Articolo come descritto e consegna in tempo.
Breno
Reviewed in the United States on November 26, 2024
The BriskMore Black CO2 Inflator is a must-have tool for any cyclist. It’s super compact and works seamlessly with both Presta and Schrader valves, making it perfect for all types of bikes. I’ve used it on my mountain bike during rides, and it quickly inflates my tires to the right pressure, saving me time compared to traditional pumps.
BKH
Reviewed in the United States on January 7, 2024
I finally found the perfect (as near as I can tell) CO2 inflator. It's as compact and light as you can go and still be useable. It's made out of CNC'd aluminum with an easy-to-modulate inflation valve and unlike so many other inflators, this one can screw onto your valve for a secure connection prior to inflation. Well worth the cost!
Javier Gonzalez Raso
Reviewed in Spain on November 6, 2023
Perfecto
Edgar Martínez
Reviewed in Mexico on July 2, 2022
Esta pequeña y es de aluminio, esta muy liviana y pequeña
ThisIsFine
Reviewed in the United States on August 29, 2020
Used with 25g carts. Several times I used half a cart or less, tightened the valve closed, threw it back in my tool kit, and this inflator didn't leak a bit. This unit kept open cartridges sealed for weeks at a time. Smooth to open and close, the valve in this inflator is high quality.Screws easily onto my Presta valves, with smooth action, and no air leaked going on, nor coming off.The insulator is crucial, rounding out a great experience during application, and it fit 20g carts without issue.I keep slime tubes in the 700c 28 size tires of my shaft driven, IGH commuter. Recently on a late night ride home, in the final 3 mile stretch/climb, my front tire gave in, forcing me to the dirt shoulder. It was completely dead flat. Remaining straddled over the bike, I checked for thorns/etc., then lifted the front wheel and gave it good spin or three to distribute the slime. Next I grabbed this inflator from my bag, leaned over the bars, and easily screwed it onto the presta valve. I gently opened the inflator valve and my tire sprang back to life. Guesstimating 60 psi left a bit extra in the cartridge which is right where I like to be. Buckled my pack up, and I was back rolling in what was hardly over five minutes. Great feeling.Finally, after a year and a half, and about 24 cartridges, I had beat the cartridge receptacle o ring beyond function. Back on AMZ, considering a new inflator I decided to check this listing again only to be reminded of the 3 spare o rings stored on the device! Back to new in two minutes. This compelled me to write this review.This conservatively styled inflator has a thoughtful design, and has provided me with what I can only determine to be flawless functionality, and an optimal experience in field application. If only it was priced to provide maximum value.. Oh wait! IT IS! I'm very happy to have scored this great device.
Methodical
Reviewed in the United States on February 1, 2019
I just received the inflator today and while I have not used it out on the road, I tested on my wheels at home to make sure it works and that I don't encounter any surprises; it worked flawlessly. I've only used the Proflate Elite unit and can affirm that the BriskMore is a much better quality piece of equipment.Below are my observations.1. threads securely onto presta valve resulting in no loss of C022. very simple and easy to use3. smooth valve control4. no air loss when removing the tool5. spare replacement seals for valves (nice touch)6. includes sleeve to prevent damage to hands during use (nice touch)7. takes up very little space in my seat bag (I use a small bag)8. works with 20g cartridges (i.e. used with genuine innovations cartridges), even though specs says 12 and 16g only. Can't speak for other C02 cartridges.9. light weight - 22gThis is a nice inflator and I would recommend it to my fellow riders if ask. The inclusion of the spare seals and sleeve is a nice touch that most companies would not include and charge a premium to acquire. I am going to purchase a 2nd BriskMore to replace the Proflate Elite I have in my mountain bike seat bag.
Tommy D
Reviewed in the United States on November 19, 2019
This device is well made, small, functional and light. It's a great investment in so many ways. For years and years, I carried a frame-mounted pump. I thought I was the last rider on the planet with a manual pump, but as I look around, I see some of my friends still use them. Dump the little hand pump and buy this! First, your little hand pump will never help you achieve significant PSI. Second, your little hand pump takes up too much space. Third, this device is amusing! When this arrived, I was so excited to use it, I practiced filling tires on the family bikes. I would recommend you do that, too, so your first usage isn't on the trail. When filling, take care to remember your chemistry teacher's instruction about the relationships among P, T, V and n so you can avoid freezing your hand. All you can do is move your hand or wrap it because the temp of the metal in your hand is going to drop fast. This fitting combines with CO2 inflation cartridges to form a 2-part solution. Make sure you buy threaded CO2 cartridges. While flats on the trail are irritating, this little guy does its part to lessen the irritation.
Recommended Products
$67.99
$ 31 .99 $31.99