Your cart is empty.
Your cart is empty.Product Description
The BESSEY TK-6 is a designed to hold a variety of tools securel to your work surface. The TK-6 clamp may be used to secure an S-10 protable mini vise to a table top. They also work with the WS-3 and WS-3+2K 90° angle clamps. Since the introduction of the REVO the TK-6 can also be used to mount your K BODY clamps to a work surface. Thay are sold in pairs, and can be found bundled along with WS-3+2K and the S-10. BESSEY. Simply better.
From the Manufacturer
The TK-6 Table Clamp easily attaches to Bessey's WS series Angle Clamp, holding it solidly to a worktable to hold, fix, and align material at 90 degrees for framing applications, furniture assembly, cabinetry and more. A galvanized spindle means positive clamping and longer tool life.
Bessey continues to be the world leader in quality and innovation in hand clamping technology. The Bessey name has earned the status of "clamp of choice" among the non-professional and professional woodworkers. Bessey's woodworking, steel, and welding clamps are designed and engineered from the ground up by people whose single focus is clamps. Bessey uses its own steel mills to process the highest quality steel available guaranteeing that every clamp is worthy of the Bessey name.
FEATURES
- Easily attaches to Bessey's WS series Angle Clamp holding that clamp solidly to a worktable
- For framing applications, furniture assembly, cabinetry and more
- Galvanized spindle means positive clamping and longer tool life
SPECIFICATIONS
- Accessory for the Bessey WS Angle Clamp
STANLEY SHORE
Reviewed in the United States on March 1, 2025
Well made. Fair price.
Angel g.
Reviewed in Mexico on April 1, 2025
Excelente, muy prácticas y de buena calidad.
Kerry Mead
Reviewed in the United States on June 29, 2024
These are great for holding vices and clamps to my work table. Drill a hole in the edge of a wooden block and mount your vice or clamp. I'm going to make another to hold a movable lamp.
Yogi Reviews
Reviewed in Canada on January 30, 2024
These are exactly what I needed for my needs. I needed a clamp to hold down my SWIX Nordic ski waxing profiles. The SWIX branded clamps are priced at $50 which I thought was way too much. These one's worked perfectly at a fraction of the cost. The rod shaft has a diameter of 8mm which fit perfectly into the waxing profiles. Overall highly recommend these if you are looking for a set of specific clamps.
Juan Guevara
Reviewed in the United States on September 4, 2023
The title is really all you need to know.These are cheap but effective, I'm using this as a better table clamp for my direct drive wheel (CSL DD) found a printable base on thingiverse that these are compatible with and it's been working flawlessness. I appreciate the rubber tops on the clamp end so my desk surface isn't getting absolutely destroyed!I've been using this for just over a month, and I've only had to retighten them occasionally (as expected when the DD is shaking the crap out of my work surface). These are simple but fantastically rigid!
Hugo Escalante
Reviewed in Mexico on October 30, 2022
Ojo al adquirirlas, revisar las medidas con atención ya que son muy pequeñas. Servirán solo para la ingleteadora.
Onslow
Reviewed in the United States on October 1, 2022
I needed to trim some thin edges off using my table saw. Ordered these as part of a "sacrificial fence" using a scrap piece of wood. After sight measuring the locations for two holes in the top I used a brad point drill bit (to prevent traveling) and freehand drilled the two holes. The pins of the clamp fit perfectly in the holes and really improved the options for using my tiny Craftsman table saw. The clamps look a little thin and flimsy on the screw and footpad, but they hold the sacrificial securely to the real fence.
Richard
Reviewed in the United States on April 21, 2022
Work nice on my table saw, price was right.
B Reasonable
Reviewed in the United States on March 20, 2021
For a table saw ripping on the right side is what I'll need them for. So when I need to rip something on the right side. It's a simple thing to pull out the ready made fence and Clamp-On Vise Base,. Zip Zam and done.. Put it away and onto the next step.
noonefamous
Reviewed in Canada on January 11, 2021
I got a pair (2) in my order & am pleased. Come in handy for my purposes.
Adam Howse
Reviewed in Canada on April 8, 2021
This was a smaller clamp than I thought it would be though it's still just as good for what I need it for. Other clamps won't do, this is specialist equipment imo hehe.
Troy D.
Reviewed in the United States on December 23, 2017
These are not really designed for clamping auxiliary fences to the table saw, but I'm sure I'm not the only one who purchased it for that. As long as you're aware that the clamping depth is rather limited, these could work out in your favor. Also be aware the depth of the pin is not very tall either, so you'll be lucky to get 2.5" or so. Just check the dimensions before ordering to make sure these will work for your situation. If they do, they are a pretty good value compare to every other clamp out there. Pretty lightweight as well, so I would not torque down very hard. So, think light weight with limited range.
Nicole M. Tankovich
Reviewed in the United States on August 25, 2016
These are small, as one reviewer noted. However, that was JUST what I needed. I scored a used pasta roller for $8 at a local used stuff shop (similar to this one ), but the clamp was missing.Replacement clamps marketed for that specific purpose are ridiculously over priced (I could just buy a new machine and clamp!), so I started shopping around the hardware section.I first tried a pair of these (). They were big enough to fit over the base of the pasta machine and the counter, but the handles got in the way of the crank, so I could only use one at a time, which wasn't very stable or secure.The Bessey table clamps are JUST right for this purpose. The "peg" fits into the clamp hole on the pasta machine with room to spare, and the clamp opens enough to fit around the machine and counter. I was able to secure the machine with just one of these. It was a bit tricky making sure it wasn't angled out at the top, but I think with practice that may be easier. I suppose I could also use two clamps (one on each side of the base), and that may be what I try next time.Overall, these worked well for me and were the right price point.
Recommended Products
