Your cart is empty.
Your cart is empty.Product Description
-
-
Applicable staples
- 21 Gauge 80 Series Fine Wire Staples
- Crown: 1/2 inch (12.8mm)
- Leg Length: 1/4 inch - 5/8 inch (6-16mm)
-
-
NO WORRY FOR STAPLES!!
Still have trouble buying staples adapted to the 80 series staple gun in offline stores?
Here we have 8010 staples for you that perfectly fits the N8016.
-
NO WORRY FOR STAPLES!!
Still have trouble buying staples adapted to the 80 series staple gun in offline stores?
Here we have 8010 staples for you that perfectly fits the N8016.
Dave
Reviewed in the United States on September 3, 2024
I HAVEN'T HAD ANY ISSUE WITH IT THUS FAR
Arthur Miller
Reviewed in the United States on December 13, 2023
I do not do a lot of stapling, but when you need to staple you usually need to do a lot of stapling. I have always used the standard spring operated stapler that is just a killer on your hands. So, I saw this and thought I would give it a try. Here are my thoughts on the Kamsin #KN1013J 20 Gauge Upholstery Furniture Stapler:1) It is a pretty standard layout for a pneumatic tool. This particular unit sends the blast of air out the back of the stapler right at the hose attachment. This is nice since that part is typically not pointed towards your face.2) The tool seems pretty balanced to the weight making it so that you do not fatigue easily using the tool.3) It is very basic. There are no adjustments on this tool. You put in your staples, close the lid and staple. Zero adjustments anywhere that I could find.4) The stapler is not very versatile as far as the selection of staples you may use. As advertised it uses 7/16" width staples with a length of 1/4" to 1/2". That is it. No brad nails, no 1/4" width. This unit is very specific on what it can use. I know other guns do have a different holder and can handle more types of fasteners. But if you use this size a lot, and don't need multiple style fasteners then this will work well.5) The staples lay in the bottom so you can't open to add more staples until you turn the unit upside down. Not a biggy but I don't know how many times I have dropped my remaining staples out on the floor opening up the unit.6) I tested this tool using 85 psi in the line and it stapled great on several different types of hard wood.This unit is not fancy, but it will get the job done and save your hands in the process. In my testing, I did not have any jams. I only had one time when it would not eject the staple. I opened up the compartment, then picked up the staples off the floor, reinstalled the staples and it fixed the problem and it didn't happen again. So with that said it is a staple gun that should work well over the years.
Bill Miller
Reviewed in the United States on December 11, 2023
They get the little staple jobs done without the manual spring stapling I'm used to. Easy to use and works good.
Recommended Products