Your cart is empty.
Your cart is empty.
ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look.
Mount Type
ShiftMount naming convention is [shifter type - brake type]
MM-ISII is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC II brake
MM-ISEV is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC EV brake
ISEV-ISB is for a Shimano I-SPEC EV shifter mounting to a Shimano I-SPEC B brake
ISEV-ISII is for a Shimano I-SPEC EV shifter mounting to a Shimano I-SPEC II brake
MM-MAG is for a SRAM MatchMaker shifter mounting to a Magura brake
ISEV-MM is for a Shimano I-SPEC EV shifter mounting to a SRAM MatchMaker brake
22 Clamp-ISII is for a Shimano I-SPEC II shifter mounting directly to a handlebar
22 Clamp-ISEV is for a Shimano I-SPEC EV shifter mounting directly to a handlebar
Compatibility
Designed to work with rear (right side) brakes and shifters.
Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters.
MM-ISEV is compatible with M9100, M9120, M8100, and M7100 Brakes. It is not compatible with Deore M6100 or M4100 brakes.
MM-ISEV, MM-ISII, MM-MAG is compatible with but not designed for SRAM AXS. With SRAM AXS, the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders.
For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque.
lowfat
Reviewed in Japan on January 4, 2025
同社のShiftMount ISEV-MMを少々加工して使ってみたが、もう少し手前に回転させた位置でシフターを使いたい自分の好みに合わなかった。シマノ純正22.2mmクランプはTrinityのマスター形状と適合せず水平位置が合わない(遠すぎる or 近すぎる)。その両方を完全に解決するのがこのパーツ。クランプの幅が狭く、Trinityの独特な形状でもいい感じの位置にクランプでき、さらにI-SPEC-EVの微妙な水平位置調整が使える
D.Zimmerman
Reviewed in the United States on September 6, 2024
Impeccably manufactured and a perfect match for my Shimano SLX M7100 shifter. Yes, it's more expensive than alternatives, but you get what you pay for, and when it comes to Wolf Tooth, you get "Made in the USA" quality from a company that stands behind its products with terrific customer service, and I will always gladly pay for that.
Simon Jones
Reviewed in the United States on July 19, 2024
Expensive for what it is!
Steven K. Seawell
Reviewed in the United States on December 5, 2024
This fixes my Shimano XT problem using 11 spd I-Spec II rear shifter and I-Spec EV 12 speed M8100 levers. This Shiftmount is designed for an I-Spec EV shifter but also works perfect for the XT SL-M8000 I-Spec II shifter. You can make the Shimano-supplied slanted block T-nut mount for the brake lever band work, but pulling back the shifter release lever it hit my grip. I can only use the release lever pushing fwd.OK, but not ideal. The Wolf Tooth ShiftMount is pricey, but it`s hinged, increases lever clearance to grip and allows shifter controls to position more inboard where I prefer. NOTE: DO NOT use the weird M8000 shifter-supplied screw from Shimano, it`s too long and will scratch your bars. One of the disc brake button head screws work perfect. They`re shorter and you need a T25 Torx driver for them.
mike neal
Reviewed in the United States on October 9, 2024
This adapter did the job and I'm hoping it was manufactured in the USA like my Wolf Tooth chainring I purchased but my Lord $39.00 is a bit pricey for such a simple component.After I did some research found out I could have gotten the shifter I used with the mount included for cheaper than this thing.Shop around! 3 stars for the ridiculous price.
Mike R.
Reviewed in the United States on October 21, 2024
I needed a clamp for a Deore XT shifter that came of another bike without the brake levers. After days of searching I could only find this clamp made by Wolf Tooth. Yes, it gets the job done. Yes, its made of good quality. However, the price is waaayyyyy over marked for a handlebar CLAMP. $40?? Come on!! You can buy the Shimano shifter with the clamp integrated for just about the same price! End of rant.
Paolo Herce
Reviewed in the United Arab Emirates on July 24, 2023
Perfectly fit
Peanut
Reviewed in the United States on November 27, 2023
It fits perfectly; however, it's pretty expensive for just a small adapter. I can't believe nobody had made a knock off for it...
Myra M.
Reviewed in the United States on May 29, 2022
So let me say that this lil adapter works great… it’s well made, perfect.Bolted right up to my M8100 (XT) I-Spec EV shifter and bolts right up and snug on my standard PNW 22 bars.Just the price!This is something that is needed when you go from M7100 (SLX) brakes that were I-Spec EV to I-Spec B (Shimano Saint M820)… why Shimano can’t just keep 1 standard?Anyway… 5 stars for product, delivery time and compatibility… 1 star for price… $39 for an adapter?
Fernando rodriguez
Reviewed in the United States on December 7, 2022
Perfect
Recommended Products
$82.64
$ 35 .99 $35.99
$34.99
$ 16 .99 $16.99