Your cart is empty.
Your cart is empty.UTG PRO P.O.I (Precision Optics Interface) Picatinny Scope Rings. Aluminum and Steel Construction, Integral Squared Recoil Stop, Low Profile Torx Locking Side Plate with Dual Spring Loaded Guide Rods, Precision Machined Inner Ring Surface, 4 Torx Screws, 30mm Diameter, 25mm Center Height, 22mm Wide
mark m
Reviewed in the United States on March 14, 2025
All my life I have been going top of the line when it comes to just about anything and especially firearms, scopes and mounts etc and of course they have their high price to boot but the mounts from UTG are really good USA made mounts with a great price tag which I am proud to use on my latest build. I discovered UTG years ago when I bought a $2500 air rifle and needed a 34mm mount for its scope and at the time 34mm mounts were scarce and UTG 34mm mounts were the only ones available when I bought the scope at the sports shop so what the heck its only air right! The quality and robustness I am finding with the UTG brand is equal in strength and precision to some of the high end mounts I've used and I have a lot, with the price being almost a 1/4 of the cost and made in USA too..Their tip off mounts are great and are designed so it easy to remove and adjust for torque..Can't find anything wrong with them and they look great too..My AR has them as well as several custom rimfire guns and I have had "0" issues...
Denise Roig
Reviewed in the United States on March 28, 2024
Amazon delivery failed to deliver on time once more. Had to wait an extra day. Pointless to offer rush delivery!!!
Michael
Reviewed in Canada on September 9, 2022
The low profile goes very low. The quality is exceptional. UTG has some products made in the states.Their high end bipods and these rings are excellent products. The rings feel like steel rings but it has a rough matted surface which is excellent if you like matte black/grey. The best part is how you lock it down to the picatinny rail. It closes similar to American rifle company m10 rings the way it latches onto the rail. Once you screw it clamps the pic rail and the part that goes between the rails it a rectangular shaped rather then a cylinder. I can't say enough or these rings but it and you wont regret. I cant afford the rings that are 200-300 dollars but these are just like those and a third of the price.
A. Prill
Reviewed in the United States on July 3, 2019
These UTG rings are the best per dollar that I've ever seen. They are just as nice and precise as the top end brands but are about half the price. They're also made in Michigan. UTG rings do run tall, so remember that when ordering, and it's best to check their website for measurements. UTG provides detailed product dimensions and other specifications with pictures in their website.These rings are American made out of the same material, to the same quality standards, and uses the same finish as the top end brands. This is proof to me that the other brands are overpriced for no legitimate reason.
mike olson
Reviewed in the United States on March 21, 2019
Very well made in the USA. Look great. Very solid, don't feel flimsy like other cheap rings that I have bought in the past. I will be putting these on a few other rifles I have and some future builds I've been wanting to do.
katie Green
Reviewed in the United States on January 24, 2019
I bought the low 30mm rings. I have not shot with them yet but they do fit like a glove and look good. But being a USA made product I was pretty disappointed the American flag is no longer etched in the side like pictured. I was really looking forward to keeping my Ruger American Predator looking American AF.
Pen Name
Reviewed in the United States on January 17, 2019
Great rings for the price. Used a wheeler scope mounting kit and the rings didn’t even need to be lapped in. I do like the larger t25 torx heads too, a lot less prone to strip out the heads like on other rings while torquing them done.
gx
Reviewed in the United States on August 18, 2018
these are fantastic rings for the price point. theyre made in the usa which i like very much. they were machined very well. i used my wheeler lapping kit to check the straightness after torqueing the screws down i can say that these rings lined up perfectly to each other. they are in my opinion better than some of the precision rings out there that ive used whose claims are precision matched, which is false to most ive tried, theyve all required a little lapping to become nice and straight with one another. these rings required no lapping whatsoever and i am very impressed with them. Great price i really like them!!
Luc
Reviewed in Canada on December 7, 2018
Appear to be well built. Fit great on my Tikka. Well worth the money.
Al_scv
Reviewed in the United States on April 29, 2018
For the price these are very good rings. I have the 30mm low profile version and they are well made and work great. I have some of the cheaper UTG rings on an AR and they work fine for what they are. Just know that these rings are totally different from those cheaper rings. No comparison at all. These will be my go to rings for now on. BTW, these look to be the exact same rings that another mfg. sells for around $70 each.I like the Seekins / Vortex Precision rings and have those on my other rifle. I would not hesitate to use these instead of those more expensive rings. The quality of the rings are darn near equal, if not equal. The only real difference is one larger clamp screw on these, compared to the dual (but smaller) clamp screw on the Seekins / Vortex rings.
Recommended Products
