Your cart is empty.
Your cart is empty.Jeff Aguilar
Reviewed in the United States on March 5, 2025
I have read the reviews on these hubs and bought them anyway. I put them on a tgp 1” keyed shaft, yes they are too small but just the thickness of the plating. My biggest issue with them was no set screw on the keying. But with little effort to sand out the inside and a drill and tap they work great. With out these two things I would say that they are worth the money.
Patti Stevens
Reviewed in the United States on July 2, 2024
The bore said 1" that was what I needed, they don't fit a 1" shaft you have to bore them out. I ordered them before I read their review. My mistake, they are junk, I will never order from this place again. They talk the talk but don't walk the walk!!
Paying Customer
Reviewed in the United States on March 5, 2024
I've purchased a new 1 inch live axle. Everything else fits perfectly. These do not fit. They won't even fit over the threaded end. The bore is too small. Also, they only sent a total of 4 bolts which is 2 bolts for each hub. I only ordered these because they were sold cheaper as a pair. Now they're going back and I'll be repurchasing my other ones!
pythan
Reviewed in the United States on February 8, 2024
1st off they are not black in color. They are shinny silver which means I need to paint them.2nd and most importantly is that the center bore will not fit a 1" shaft. They are supposed to be a 1" bore but they are only 25mm so a 1" center shaft will not fit. Now I have to bore them out and the will delete the plating and cost labor.I'm still debating return or re-bore and paint.
John r
Reviewed in the United States on October 19, 2024
I ordered these because they were black yet this is what I got. No locking nuts and no 1/4 inch keys for either one. Will be sending these back
Frn
Reviewed in the United States on November 27, 2023
It said it was five inches and it was four if it was five inches it would fit the rim I was trying to put it on
Mike C
Reviewed in the United States on September 26, 2022
The screws thay lock it in place dont stay in at all, even with red threadlock. And i bought 10 different sets to try and replace and of course not one of them fit so i had to weld them on to the axle to keep them in place. The keys could be made to fit a little more snug as well to eliminate the little bit of play on the axle which my guess would be the cause for the set screws to fall out
Cody Valdez
Reviewed in the United States on August 31, 2022
Hardware is kinda cheap ! Ace Hardware carries grade 8 bolts to replace them but all in all greatvalue
Recommended Products