Shopping Cart

Your cart is empty.

Your cart is empty.

TORCH 2' Front 1' Rear Lift Kit for 2005-2023 Toyota Tacoma 4X4 4WD w Differential Drop TRD SR5 - Models with 6 Lug Wheel Bolt Pattern ONLY

Free shipping on orders over $29.99

$124.95

$ 51 .99 $51.99

In Stock

About this item

  • FITS: 2005-2023 Toyota Tacoma 4X4 4WD SR5 TRD (6 LUG MODELS ONLY - will NOT fit 5 lug models)
  • CONTENTS: Front Strut Spacers for 2" Lift, Differential Drop Kit, 1" Rear Tapered Lift Blocks, Extended U-Bolts and Hardware
  • INSTALLATION: Bolt on kit. Comes with step by step instructions for the DIY backyard mechanic.
  • Lifetime Warranty. Dedicated Customer Service.
  • NOTES: Front Strut Spacers will generate 2" of Lift, it is NOT a 2" thick spacer. Please message us if you have any questions



Product Description

TORCH

TORCH 2" Front 1" Rear Suspension Leveling Lift Kit

Enhance the look of your vehicle and run larger tires with TORCH Off Road's Lift Kit

  • Our TORCH Off Road strut spacers are an easy way to get 2" of lift in the front.
  • The strut spacer Installs right on top of your strut so you won't need longer shocks.
  • Comes with a rear 1" lift that includes tapered fabricated steel blocks to maintain your driveline
  • Differential drop and skid plate spacers are included with this kit to keep your front axles at optimal levels (for 4X4 models).
  • Includes high strength steel U-Bolts that can withstand maximum load capacities with no compromise.

Fitment

  • 2005-2023 Toyota Tacoma
  • 6 Lug Models Only
  • Not Compatible with 5 Lug Models

Kit Includes:

  • 2" Front Lift Strut Spacers
  • Differential Drop Kit (includes skid plate spacers)
  • Tapered Rear Blocks
  • Extended U-Bolts
  • Comes with instructions and everything shown in the picture.

Benefits:

  • Easy 2-4 hour Installation Process***
  • Increase Ground Clearance And Install Larger Custom Rims & Tires
  • Built-in taper on the blocks remove the need to purchase additional shims to fix the rear pinion angle of your truck

Technical Notes

  • Front Lift: 2"
  • Rear Lift: 1"
  • Front Strut Spacers will generate 2" of Lift, it is NOT a 2" thick spacer.
  • An alignment is always recommended after altering the height of your vehicle.***

Strut

Strut Spacer

Our TORCH Off Road strut spacers are an easy way to get 2" of lift in the front. Installs right on top of your strut so you won't need longer shocks.

Diff Drop

Differential Drop Kit

Differential drop and skid plate spacers are included with this kit to keep your front axles at optimal levels (for 4X4 models).

REAR BLOCKS

Tapered Rear Blocks

Comes with tapered fabricated steel blocks instead of cast blocks that can crack and fail on you.

Powder Coated U-Bolts

Extended U-Bolts

High Strength Steel Extended U bolts and can withstand high load capacities with no compromise.

Wheel lug example

6 LUG MODELS ONLY

This kit is only compatible with 6 lug models. Please reference your wheel lugs before purchasing this kit for your Tacoma.

Stickers

Every kit comes with a TORCH sticker pack full of stickers of various sizes to share with your friends and family. Be sure to tag us on social media with your stickers and you can be featured on our main page!

TORCH OFFROAD

David P.
Reviewed in the United States on September 14, 2024
I definitely recommend Torch lift kits to anyone.They are great quality at a great price!
clay kelley
Reviewed in the United States on December 29, 2024
I ordered a 2” front 1” rear lift kit for my 3019 Tacoma. But the front spacer only measures 1”.
Schnozzberries
Reviewed in the United States on November 16, 2024
Put one of these on a 3rd gen taco, runs higher than same kit in 4Runner, which then requires more LCA adjustments
Brent
Reviewed in the United States on October 2, 2024
This kit has everything in it that i wanted. I highly recommend it.
Raymond Zaragoza
Reviewed in the United States on April 7, 2024
Quality parts and hardware installed without issues. My tacoma now looks more like a 4x4. Glad I ordered and would highly recommend. Just a tip, for the 2" front spacer, the tips (non threaded part) of the 3 original studs on the strut needs to be shaved down a little so it's flush or below the spacer.
Nicholas Engelbrecht
Reviewed in the United States on August 11, 2023
This item came up based on search for similar products. Selected this item from Torch because it looked like a decent product and had great reviews. Did not disappoint! Item arrived a day earlier than expected and was packaged very well to avoid loss or damage during shipping. Unfortunately, it was missing a locknut and washer - hey it happens! - but reached out to Torch Industries and they were very quick to respond and make it right! I have the lift installed in my 2017 Tacoma and it looks great and is solid! Very happy I went with this product and will definitely purchase from this seller again based on their outstanding customer service! They care about their customers and their product!
WES35
Reviewed in the United States on November 27, 2023
Very inexpensive way to level your Tacoma. I installed it on a Sunday by myself on a 2023 Tacoma DB LB TRD 4x4. Would definitely recommend!
HR
Reviewed in the United States on May 1, 2022
Fast shipping, exactly as described. Neatly packaged and all pieces in the picture are included. When installing, it makes it much easier if you loosen the sway bar on both sides prior to attempting to get the front coil spring out. If you remove the lower ball joint bracket, loosen the 2 camber bolts in the lower control arm, you can use a pry bar to push the lower control arm down enough to slide the shock/spring out. If you don’t remove the sway bar bolts on both sides, its near impossible to get it out. Everything ligned up and bolted together without issue. One annoying thing is that all the hardware included is one size larger than factory hardware. So be prepared to have a good ratchet wrench set to make it easier. Do yourself a favor and soak down all the bolts with penetrating oil a day or two prior to make life easier when it comes time to install. I used two floor jacks and hand tools to install the kit. I also had to replace a seized caster bolt and a lower control arm on the drivers side, that was not bad once you get the old one cut off. Last thing, to make installation quick and easy for the rear, I did one side at a time, cut the 2 U bolts holding the spring on once it was jacked up and tire removed. Otherwise its going to take a big impact gun to remove the factory hardware. Had truck aligned after I finished, drives as it did before the lift. No need to replace shocks for this lift. The tapered blocks line up the drive shaft and the differential drop is a must as it protects the front driveline for the 4x4. I installed 16” wheels with a positive 12mm offset, 275/75/16 Trac Grip M/T and a 1” spacer as the tacoma front brake caliper is rather large and was rubbing on inside of wheel. I am happy with the purchase, highly recommend if you are looking for a subtle lift, straight forward installation and you get to keep the reliability that your tacoma is built with. I wanted to go higher with the lift but not worth the trouble I read about over and over with larger lifts. This kit allows for larger and wider tires, no rubbing, looks good, rides just like factory, just a bit higher.
Recommended Products

$49.95

$ 22 .99 $22.99

4.7
Select Option

$54.95

$ 28 .99 $28.99

4.5
Select Option