Your cart is empty.
Your cart is empty.Product Description
TORCH 1.5"-2" Rear Add A Leaf Lift Kit w/ 8.5" Square U Bolts
Enhance the look of your vehicle and run larger tires with TORCH Off Road's Rear Lift Kit
- TORCH Off Road Add a Leaf rear lift kit will give you 1.5"-2" of lift and an increased maximum load capacity.
- Our Add-A-Leaf Springs are designed to be added to your existing leaf spring packs and also enhances vehicle spring rate and reliability when towing.
- These 8.5" U bolts will give you the extra amount of clearance you need to install our leaf springs.
- Please measure your existing U bolts before ordering.
Fitment
- 1995.5-2022 Toyota Tacoma 2WD 4WD
- 6 Lug Models Only
- Not Compatible with 5 Lug Models
Kit Includes:
- TORCH "Add-A-Leaf" Spring (for 1.5"-2" of lift)
- Extended Alignment Pins and Hardware
- Isolator Pads
- 8.5" Extended U-Bolts and Hardware
Benefits:
- Easy 1-2 hour Installation Process***
- Enhance Vehicle Spring Rate, Maximize Load & Towing Capacity
- Minimize Squat Or Sag Under Heavy Load
- Increase Ground Clearance And Install Larger Custom Rims & Tires
Technical Notes
- Rear Lift: 1.5" - 2"
- Leaf springs are 2/5" thick (message us if you have any questions)
- Leaf Spring Dimensions: 60mm wide x 10mm tall x 540mm long
- ***An alignment is always recommended after altering the height of your vehicle.
Leaf Springs
Our TORCH Off Road Add a Leaf rear lift kit will give you 1.5"-2" of lift and an increased maximum load capacity. Our leafs are 10mm thick at the center and taper at the ends where isolator pads are installed for a smoother and quieter ride. Comes with extended alignment pin bolts for multiple configurations. Our leaf springs are slightly wider and thicker than most on the market to ensure that it seats correctly and retains its spring rate.
Powder Coated U-Bolts
Our TORCH Off Road extended U bolts are powder coated and comes with hardware. Perfect if you pulled rear blocks from another truck and installed them on yours or just got some extra leaf springs that you put on your truck for some added capacity. These 8.5" U bolts will give you that extra amount of clearance for what you need.
Stickers
Every kit comes with a TORCH sticker pack full of stickers of various sizes to share with your friends and family. Be sure to tag us on social media with your stickers and you can be featured on our main page!
K.Marlatt
Reviewed in the United States on March 14, 2025
They dont lie, it adds 1.5" of lift, but makes the ride a little stiffer. Kit is well put together and easy install.
Logan
Reviewed in Canada on February 7, 2025
This product works exactly as expected and comes with everything you need to make it a effortless installation
Net67
Reviewed in Canada on April 10, 2025
Merci
Shawn
Reviewed in Canada on May 6, 2024
It’s was a easy install
Brenda Kiefer Casperson
Reviewed in the United States on February 7, 2024
Had these on my 2011 Tacoma and never had any trouble. Added the height I needed for offroad travel and the stiffness for towing my 17’ boat. Liked them enough I bought these and installed them on my “new to me” 2020 Tacoma. You can spend more money on other brands but don’t need to as these are high quality and well performing.
David Alex Daniel
Reviewed in the United States on February 29, 2024
Good little kit, I had 4" lift blocks that gave the pickup a rake, now the pickup it totally level and looks nicer. Shocks aren't stretched out nor is the brake line. my only recommendation is to clean the underside of your pickup before you start.
engle
Reviewed in Canada on October 20, 2024
This 1.5 to 2 inches does the job. Bounce is good
Jared Couture
Reviewed in the United States on January 17, 2024
I installed these on my 2004 Tacoma. I use the truck for work and have 500 lb of tools in the back plus a contractor topper. Install is relatively easy. My old U Bolts were pretty rough so even with a liberal dousing of penetrating oil and an ultra torque cordless impact the nuts took some time and came off smoking. Keep that in mind. There’s a highway under construction near me with a bump that would make me hit the bump stops sometimes. That’s not happening anymore. Truck does look like it’s 1970 and a guy with a Camaro and a JC Whitney catalog owns it even with the tools loaded in there. They might settle a little. Truck rides great now!
Colorado
Reviewed in the United States on April 28, 2024
*Potential Vibration IssuesWhen installing the Torch Add-A-Leaf kit on your Toyota Tacoma, please be aware that additional work may be necessary to address potential vibration concerns.The addition of a lift leaf can sometimes introduce unwanted vibrations into the vehicle's suspension and drivetrain. To properly resolve these issues, the following steps may be required:Replace Lower Control Arm BushingsThe lower control arm bushings may need to be replaced. This is a complex job that requires specialized tools, including a 20-ton press, a press/pull sleeve kit, and various sockets and wrenches. Pressing out the old bushings and installing new ones is a critical step to eliminate vibrations.Inspect Drivetrain ComponentsThe driveshaft, axle shafts, and other drivetrain components should be thoroughly inspected for any physical damage or balance issues. If the vibration stops when the vehicle is in neutral, this indicates a problem within the drivetrain that will need to be diagnosed and repaired.Check Steering and Braking SystemsThe steering components, including ball joints, should be inspected if the vibration occurs when turning the wheels. Additionally, the brakes should be checked for any issues, such as brake grab, if the vibration is present during braking.Please note that the complexity of these additional remedies are very common to the Toyota Tacoma and necessary repairs or replacements that cost a lot more may be required to address vibration concerns after the installation of the lift kit.I recommend consulting a qualified automotive technician *before installation to ensure the proper diagnosis and resolution of any vibration issues that may arise from the installation of the Torch Add-A-Leaf kit on your Toyota Tacoma.*A front end alignment will be necessary after install
Wayne B.
Reviewed in the United States on August 29, 2023
These are a great upgrade for the money. I am glad I did not spend $300+ for air bags or other kits. These are fairly easy to install if you are handy. These definitely increased the payload capacity of my TRD Tacoma & leveled the truck out nicely w/ 2" pucks in the frontend. Highly recommend & would buy again!
Ian Atkinson
Reviewed in the United States on June 15, 2023
Medium difficulty to install. Rides better as these first gen Toyota trucks have pretty small leaf springs so I think it adds some strength and the lift looks good too
tactical sam
Reviewed in the United States on April 22, 2023
Awesome!Just what I needed for my dcsb gen 2 Tacoma.About a 2-3” lift.It’s been about 3 weeks and it hasn’t really come down.Rides better than stock.Doesn’t really come down even when loaded. Kept the factory recall-leaf pack.From empty to, mat/hard cover/box, to 20 bags of mulch. No sag, noise, etc. Rides amazing.Barely dropped when I had a 700 # sled in the bed.Look like pics. Great finish, no noise, wider than others( like factory leafs)
Recommended Products
$69.95
$ 29 .99 $29.99