Shopping Cart

Your cart is empty.

Your cart is empty.

Toolly Go Kart Clutch 3/4 Bore 12T with #35 Chain, Centrifugal Clutch Compatible with Go Kart Minibike Honda Engines 3/16 Key Way

Free shipping on orders over $29.99

$24.80

$ 12 .99 $12.99

In Stock
  • Centrifugal Clutch 3/4" Bore 12 Tooth for 35 Chain Common clutch for 2-7 HP engines 2300±300 PRM
  • Compatible with Honda GX160 GX200 GX140 GX120 GC160 GC190 Harbor Freight Greyhound 196cc Harbor Freight Predator 212cc
  • Compatible with Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4" shaft Tecumseh Engines
  • Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands
  • Package list: 1 x Clutch; 2 x screws; 1 x chain(124cm/4.06ft)



Product Description

Go Kart Clutch 3/4 Bore 12T with #35 Chain

Toolly Go Kart Clutch 3/4 Bore 12T with #35 Chain, Centrifugal Clutch Compatible with Go Kart Minibike Honda Engines 3/16 Key Way

Specifications:

Clutch Bore 3/4"
Clutch Diameter 4.21in/107 mm
Clutch Height 2.17in/55 mm
Engagement Speed 2300±300 RPM
Sprocket 12 teeth with 4 Feet #35 chain
Recommended Engine 2 HP - 6.5 HP, 3/4" shaft with flat key

Compatibility:

  • Compatible with 2-6.5hp Honda & Honda cloned engines GC160, GC190, GX120, GX140, GX160, GX200
  • Perfect for compatible with Go Kart Minibike Baja Mini Bike MB165 & MB200 (Baja Heat, Mini Baja, Baja Warrior)
  • Common clutch for 3.5-7hp engines using #35 Chain
  • Compatible with Briggs & Stratton and 2 - 6.5 HP with 3/4" Shaft
  • Compatible with Tecumseh Engines 2 - 7 HP with 3/4" Shaft

Package Includes:

  • 1 x centrifugal clutch
  • 1 x #35 chain(124cm/4.06ft)
  • 2 x screws

It is extremely important to oil the clutch, Where oil the clutch?

  • It is extremely important to oil the clutch

If heat damage occurs, the clutch will never disengage and the machine will start taking off by itself as soon as you start the engine. This is very dangerous! You can see heat damage inside the clutch drum, the metal turns from black to a blue color.

  • Where oil the clutch?

Behind the snap ring, next to the sprocket teeth at the end of the clutch. There's an internal bronze bushing behind the snap ring that requires lubrication and it's up to you to put it there each time.

  • It's a good idea to oil the chain at the meanwhile

If the chain gets kinky from lack of oil it should be replaced before it damages the clutch sprocket. A new chain is cheaper than a new clutch.

  • DO NOT lubricate the ventilation holes of the clutch, as this will only cause the clutch to slip and not fully engage anymore.
Go Kart Clutch 3/4 Bore 12T with #35 Chain

MAINTENANCE & INSPECTION (TO BE PERFORMED PRIOR TO EVERY USE)

  • Oil the clutch bushing every 4 hours of use.
  • Inspect the chain tension, chain condition, and sprocket alignment.
  • Inspect the clutch for damaged, missing, or loose parts.

About the Clutch Slipping:

Don't try and reduce a go-kart speed by limiting the travel of the gas pedal or by putting a restrictor in the carburetor to limit full rpm. Either of these methods will result in the clutch slipping, which is self-destructive. A clutch needs full rpm to lock up as quickly as possible to be able to start to cool down. To slow down a go-kart you would need to purchase a gear reduction unit, which is like training wheels on a go-kart until the driver gets used to how the go-kart handles. A gear reduction unit can reduce the speed of the go-kart in half.

About the Clutch Smoke:

The clutch weight rpm just isn’t excessive sufficient. The engine not being highly effective sufficient sometimes is the result of a mismatch in ratios to the rear-drive wheels. So the true motive is that the ratio just isn’t steep sufficient, and subsequently, the engine smokes the clutch.

The treatment for the primary clutch smoking drawback is to change the driveline in order that the general ratio is steeper. The easy technique is to extend the rear sprocket diameter.

So the clutch engagement rpm must be taken under consideration in any other case the clutch will smoke on the secondary jackshaft mounting place.


MD KF
Reviewed in the United States on January 10, 2025
Lovely I like win something works like it suppose to.
Sara Stewart
Reviewed in the United States on May 29, 2024
Thought it was thicker check the size of your sprocket
HappyCamper
Reviewed in the United States on November 14, 2024
Fast shipping
Aaron
Reviewed in the United States on July 10, 2023
Clutch arrived but the chain was not in the kit.
Jeffrey Rodriguez
Reviewed in the United States on March 29, 2023
Easy installation fast shipping great quality exactly what I ordered
Trevor
Reviewed in the United States on August 25, 2022
Chain was not long enough for a minibike needed 5ft instead of 4ft...not advertised correctly...
Customer
Reviewed in the United States on May 10, 2022
I liked everything about it and it works good
William B Carpenter
Reviewed in the United States on May 14, 2021
Awesome
Recommended Products