Your cart is empty.
Your cart is empty.Product Description
Schwalbe Easy Fit tire mounting fluid. Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply. Without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes.
Set Contains:
1x Tire Mounting Fluid
J. Spacek
Reviewed in the United States on December 31, 2024
I found the compact size of the bottle as well as the applicator to be especially helpful in keeping the lubricant precisely where I applied it, and not getting all over my work surface or areas of the tire where it would have reduced my grip.Mounting performance radial scooter tires without marring the surfaces of my wheels or causing damage to the tires themselves was the mission here.I trust SCHWALBE and know their products to be of the highest quality in the industry.Not the best price point 😕 but you get what you pay for and it goes a long way.I could not have made my project work without Easy Fit mounting fluid.
Ed
Reviewed in Belgium on November 16, 2024
Het plopt letterlijk je banden op zijn plaats !Zeer goed product !
Eric
Reviewed in the United States on October 17, 2024
The bottle was smaller than I envisioned when I ordered it. That said, it is fit for its purpose and works fine.
NW
Reviewed in the United Kingdom on October 1, 2024
This made seating the beads easy on rims that were previously very difficult to achieve properly.Delighted with the purchase.
James
Reviewed in the United States on August 8, 2023
Used it to fit some goll darn tight Schwalbe tubeless 29 x 2.6 mtn bike tires to rims and get to seat properly. Gives you the correct amount of slippery during inflation then evaporates. No reefing, no waiting. No fuss. Yeah you can use a bit of dish and water but this stuff with the applicator is so much easier. Cheaper at my LBS but purchased here.
jchadwickh
Reviewed in the United States on August 23, 2023
Makes tire mounting much easier. The bead seats properly everytime the first time when using this bead lube.
Avelar (Zeca) #Portugal
Reviewed in Spain on November 30, 2022
Uma boa ajuda na altura de encaixar o pneu tubuless... Ao encher o pneu de ar, o mesmo vai encaixar perfeitamente na roda. Recomendo👏👏👏
Xavier
Reviewed in France on May 11, 2021
Ça facilite vraiment la vie : si on se débrouille bien les pneus se font claquer à la pompe :-)
questarguy
Reviewed in the United States on December 10, 2021
better this one than dishwashing soap. it does not stick hard when you take it out again. regular soap creates like a glue on the rim brake wheelset ... hard to take it out. pop out great you dont need high pressure over 100psi. put it on both side of the tire wall
trail.biker
Reviewed in the United States on April 15, 2021
To use this, you put the tire on the rim, then lubricate the entire bead AND the shoulder of the rim just below where the bead sits. That last part is key. Then you take the tire up to recommended pressure and watch the bead magically seat itself! Stubborn fat bike tires, stupidly tight cyclocross tires, etc are all no problem now. I absolutely love this stuff. The evaporating formula and foam applicator mean that you don't have the mess and cleanup that soapy water requires. It is not often that I find a new product that earns a permanent place in my tool box. This one has!
FamilyMan
Reviewed in Canada on August 4, 2017
Simple to use - worked perfectly.My new bike has a tubeless set-up, and I was finding it quite a struggle to get the Schwalbe tires installed.When I used a small amount of Schwalbe 'Easy-Fit' (together with the Kool Stop Bead Jack) - tire went back on easily.
Troublebaker
Reviewed in the United States on June 23, 2015
Little expensive for what it is. Changing tires on many different types of vehicles there are always 'specialty' products like this and in the end Simple Green, soapy water, etc., work just as well. I'm not sure how well they work with my Schwalbe One tires and did not want to risk messing them up, though I don't think it would. No matter, I purchased and tried the Easy Fit fluid and it helps more than I expected and was worth the price. Not to mention it should last a long time. I do wish they sold a really small version of it to keep in my jersey pocket or seat bag. It would be great to have out on the road if I get a flat in my tubeless and need to throw in a tube or patch the inside of the tire to get home.*Update: after only the second or third use the foam-top dispenser tore off rendering that part of the applicator useless and in turn making it only usable by using my fingers with the mounting fluid on it. Another thing, I used it the other times simply because I have it and if it makes it easier then why not. I've since improved my tubeless tire mounting technique with the 'uber tight' tire/rim combo I run and am able to now get them on with out the fluid or use of levers just as I always have with tube clincher tires.The fluid ended up helping the most when I had to mount tires in cold weather or tires that were new out of the box. That said, w/o the fluid I could have used other things I had on hand looking back. So because of the price, the amount that it helps and what you could substitute to do the same thing I have updated my review from 5 to 3 stars.
WSchultz
Reviewed in the United States on January 31, 2014
Earlier in the day, flatted on the way to work. In the rain. A mucky way to begin. Changing tubes on Ultegra rims is never easy and I was trying to mount Conti 4000s. Two pairs of hands couldn't pull the bead over the rim. Slipped with the tire levers and punctured the tube. So, to home by car.At home, I used the Schwalbe Easy Fit. Draw a thin film around each tire bead - no more. Applying a thin film is the key. Position the first bead, then tuck the slightly inflated tube into place, and then begin seating the second bead up to the last 8 - 10 inches. Put on your riding gloves. Reverse the wheel so the remaining bead is away from you and pull the bead over the rim. It still takes effort, but the tire snaps into place with significantly less effort.Check for pinched tube, and inflate. No problems! The product works much better than I expected.Second try - this time installing new OOB Conti 4000 S-II on Zipp 30 wheels. Same story as above. There was no "speaking in tongues," and no need for tire levers. Turn the wheel so the last remaining bit of bead to be seated is away from you, and add a thin film of Schwalbe Easy Fit on the bead. Now, while seated, place your knees against the run on either side and pull the bead over the rim (with cycling gloves on each hand).Piece of cake! BTW, the Zipp 30s are just a bit easier to mount than Shimano Ultegra tubeless wheels (different bike). Now, it's time for a test ride.
Recommended Products
