Your cart is empty.
Your cart is empty.Product Description
AGS Rust Solutions Rust Paint applies directly over rust, trapping the rust and preventing it from spreading. This topcoat is fortified with epoxies to ensure superior adhesion and durability. It's also UV resistant and requires no additional topcoat, although it is compatibles with most topcoats and can be painted any color you choose.
Ideal Rust Solution For Home, Auto, Industrial, Fleet, Aviation, Marine, Rv, And Agricultural Applications
- High tech topcoat fortified with epoxies to ensure superior adhesion and durability
- AGS rust paint has UV resistant properties built right in and is compatible with most topcoats and can be painted over with any color you choose
- Rust solution is durable enough to withstand temperatures of 300 degrees and 1,000 hours of the corrosion resistance salt spray test
Tino fraire
Reviewed in the United States on March 10, 2025
great product
Rick
Reviewed in the United States on February 9, 2025
A
Eric Esparza
Reviewed in the United States on February 14, 2025
Good product, could probably even dilute it and it would work well.
s
Reviewed in the United States on February 14, 2025
Use a wire brush to scrub away the surface rust under trucks. Apply the paint to underbody of vehicle for frame rust prevention. Works well stopped the surface rust from spreading. Use eye protection and paint mask while working under your vehicle and put down something to catch the drip.
chet
Reviewed in the United States on December 12, 2024
painted my truck frame
MICHAEL N.
Reviewed in the United States on November 26, 2024
Used on my rusty trailer hitch/ receiver I prepped and cleaned it well before putting on 3 coats per directions.Seemed to cover well. Lasted longer than several paints I have tried but nowhere near what is advertised
Brandon
Reviewed in the United States on September 18, 2022
The adhesion properties r fantastic.This stuff works good as a primer to.( If ur painting something black ) just like any painting u need to FOLLOW the instructions. Every paint is different. But usually with rust converter paint it must be ruff (40/60/80 grit on bare metal) if u want to paint on bare metal. Otherwise just get the flaky rust and paint off . And blow it off with the air hose and or wash it with some dawn dish soap, and it will work out good . Just follow the instructions. Don’t take short cuts , the end result will be affected by ur preparation before u paint
Tom J
Reviewed in the United States on July 4, 2021
I used it for the roof of my jeep cherokee which was starting to surface rust. Roughed up the roof/paint with a 4.5" scotch brite wheel on an angle grinder. Then applied paint with a 6" roller brush. It went on easy and dried fast in our high humidity. The only negative was the way it was shipped. Paint had leaked out all over the can so i couldnt read the instructions. Amazon should of shipped it in sealed bag or something else instead of the standard box and puffy bags.
Recommended Products