Your cart is empty.
Your cart is empty.This 18GA 1-1/2-inch Narrow Crown Stapler Kit has a magnesium body that delivers both a strong and lightweight design. The stapler has a removable non-marring nose tip and an integrated rubber grip for improved comfort. The product is equipped with a low staple reload indicator to help alert when the staples need to be reloaded.
Customer
Reviewed in the United States on September 23, 2022
I bought this to staple down 1/4” U-Ply underlayment sheets (15 of them). I used 7/8 & 1” staples and ran air compressor at 100psi. In total I shot 7200 staples and it never jammed once! The depth control worked great. It was light weight and easy to move around. I wish it held more staples but no biggie, the staple window did let me know when I was getting low! Very happy with the performance,I would buy it again for a DIY project. Not sure how long it would last if you used it hard everyday. All-in-all, very good quality product for a DIY.
Kenneth Wheeler
Reviewed in the United States on June 1, 2022
Made in Taiwan and not China, which is a good thing. Still the same quality pneumatic stapler as when it was made here in the states, I hope the manufacture will start making it in the U.S. once again.I have just about every kind of pneumatic nailiers, all are high quality and never failed me, used in construction, so you know they have been heavily used, but each still work like they were brand new, and yes they are Porter Cable.
DHS
Reviewed in the United States on June 2, 2021
I am a Porter-Cable fan and have many of their pneumatic products. Would have given this one a 5 star rating except they kind of cheaped-out by ommiting the dust cap for the hose fitting. Other than that, if you need a great stapler look no further. I used it to install multiple gauges of hardware cloth for a chicken coop and run. About 2000 staples later, worked flawlessly.
Andy MacDonald
Reviewed in Canada on June 13, 2021
I needed to repair some furniture in the RV. Worked great, easy to position and operate. Haven't used the depth adjustment yet as it was correct for my task. This will see a lot of use in the future.Case is nice, holds the tool well.; I suspect it will break down over time a it is just injection molded plastic, but for now it's great.
TJ
Reviewed in Canada on January 1, 2021
Have always liked porter cable for durability and adorable pricing. The stapler I purchased was refurbished and works great for upholstery and many other projects.
John Treble
Reviewed in the United States on September 29, 2018
I purchased my original Porter Cable nail gun bundle over 12 years ago. I finally wore out the stapler and brad nailer, so I thought I'd just stick to PC and get new replacements. The brad nailer is much better than my original, and this stapler is too. I like the very easy loading process, and the exhaust from the handle is terrific. No more blasts of air in my face because I forget to rotate the exhaust. One thing that I dislike about lower-end pneumatic tools is that lack of a depth control. The Porter Cable guns have this feature, so when you are doing fine woodworking, you can set your nails or staples to just the right depth for hiding with filler or putty.
MSgt GB
Reviewed in the United States on April 30, 2018
So far so good! Shot about 2500 staples today and it didnt skip a beat. I had an orange stapler from the big box store and a cheap Chinese import prior to this. Both of those went belly up so I decided to go with this PC. Glad I did as it works very well and the depth adjustment is functional which is something I’m not used to. Really the only thing that bugs me is it doesn’t stop shooting when the tool is empty. My orange tool had that feature and it was handy. Anyway that’s a small nuisance in exchange for a tool that works every single time with no stoppages or jammed staples. I highly recommend-Update-Shot approx 3000 staples today and once again this tool performed flawlessly! After fighting with constant jamming in other staplers this thing just continues to impress me!
Ron M.
Reviewed in Canada on April 14, 2018
I'm very happy with this stapler. I've used it to staple down 1/4" sub floor for an 1,100 square foot home and it worked flawlessly. I most have went through 13,000 to 15,000 staples. Highly recommend this product.
Customer
Reviewed in Canada on February 3, 2017
Worked great right out of the package. Wish there was more room in the case to store staples, I wish the same of every nailer, drill or driver I've ever owned
Oli
Reviewed in Canada on October 30, 2017
Très leger , sans huile, je le recommande! Très bon produit!
toolguy68
Reviewed in the United States on October 26, 2016
I have an older version that is still going strong, but will only go up to an 1-1/8". I needed to go up to an 1-1/2".The nice thing about all the new PC small air tools is the relocation of the exhaust port to the end of the handle. I don't know about you but it seems like 90% of the time you would be firing from the same angle and have no problems, then you need to do some unique position, and blammo you get that blast of air into your eye, even with glasses on. Then you go back to the position you normally use, and forget you had rotated the vent to keep that form happening in the unique position, and blammo you get a blast of air in the face again!It's a good quality tool at at reasonable price. It is comparable to all the other brand names and much less expensive then Senco or Spot Nail. Amazon also sells three or four very low cost brands, including Campbell Hausfeld and I am sure they all can get the job done. In fact I have a Master-craft I bought for 19 bucks that will do an inch and a half staple and brads as well. Though I have had to tare it down a couple of times to fix jambs and a poorly closing magazine. You get what you pay for. In the end you have to decide is it worth the potential trouble, and how much do you plan on using it?I found it here on Amazon, as a returned in good condition item (one scratch) for mush less then list and that was all I needed to make the call. I needed the bigger magazine and the Master Craft I just couldn't trust anymore after ten years of abuse. It makes a good loner at work though.
GJH
Reviewed in the United States on April 22, 2015
I did buy the WEN 61710 3/8-Inch to 1-Inch 18 Gauge Narrow Crown Stapler at first,but had issues with it from the start with it jamming all the time. I should have bought this to begin with, since it does use the 1.5" staples that work better for repairing my yard fence vs the WEN that maxes out at 1" . One of the nice features of this gun is that it you don't need to oil it! I have used it only one time using both 3/4" staples and 1" staples, but work perfectly with no jams. Probably shot about 50 staples thru it. Build quality seems to be very good and it is light weight. It also has a tool belt hook that can be removed easily with a push button if you don't want it. I do own an air nailer from Porter Cable that I have had for a few years now, so I know the company makes good tools. I don't use these air tools often, but they seem to work well being on the shelve for 6 months at a time. I keep them in my hot NE FL garage all year round. This gun does come with a nice plastic case. I would buy it again.
Layne Howard
Reviewed in the United States on June 14, 2013
There are a number of things I like about this pneumatic stapler. It comes in a nice quality blow-molded box, with a box of 1" staples. It's lightweight, and fits easily in the hand. Staple loading is straightforward, and trigger pressing is very natural. One of its best features, and the primary reason I went with this particular stapler after checking out the competition carefully, is that it does not require oil. Not only does this mean much easier maintenance, but there is no oily splatter on the work when the piston fires. Also, it has a large staple size range--1/2" up to 1-1/2". Another nice feature is that the exhaust jets away from the user. There's an easy to adjust pressure knob, but I can't tell yet how well this works. I have now used this stapler extensively and am very happy with it.
Recommended Products
$301.70
$ 99 .00 $99.00