Shopping Cart

Your cart is empty.

Your cart is empty.

Poretkeys LH7P 7inch Camera Field Monitor 1000nit FHD 1920 x 1080 IPS Touchscreen Monitor with Built-in Wireless Module, Support Stretch Effects 3D LUT Luma Waveform False Color for DSLR Cameras

Free shipping on orders over $29.99

$314.10

$ 99 .00 $99.00

In Stock

About this item

  • 【7-inch Wireless Touchscreen Monitor】The Portkeys LH7P is equipped with wireless camera control capabilities, allowing S and BM Design camera content creators to conveniently adjust camera settings and parameters remotely. Say goodbye to time-consuming manual adjustments and enjoy enhanced workflow efficiency on set.
  • 【Wireless Control Function】- Wirelessly control A7S III/FX30/ZV-E10, BMPCC 4K/6K/6K Pro via Bluetooth connection.
  • 【Custom 3D LUT/Full Features】- You can load custom LUT files into the camera monitor for color calibration using the included USB disk. It supports a variety of functions such as histogram, vector scope, waveform, false colors, peaking focus assist, zebra exposure, zoom, and more. Additionally, it has HDR functions and allows monitoring of stretching effects when shooting vertically in real-time
  • 【4K HDMI In/Out without Delay】- The camera monitor supports a maximum resolution of up to 4K UHD 3840*2160p (24/25/30Hz) and 4096*2160p (24Hz). It can be directly connected to DSLR cameras or camcorders and receives 4K HDMI signals without delays. At the same time, the signal can be sent to another monitor, allowing directors and photographers to monitor simultaneously.
  • 【Daylight-Viewable Touchscreen】With a maximum brightness of 1,000 nits, the LH7P's touchscreen display is perfectly visible even under direct sunlight. Never miss a crucial shot due to poor visibility again, and enjoy a clear and vibrant viewing experience. Professional monitoring tools: Waveform, Vectorscope, Anamorphic, Peaking, ARRI False Color.
  • 【NOTE :】The Portkeys LH7P has the NEW UI. To apply the update, download the firmware file and unzip the file onto the main directory of your USB disk. If you have any questions, you can contact our customer service within 24 hours.



Product Description

LH7P

Portkeys LH7P 7inch Camera Monitor 1000nit High Brightness 1920 x 1080 IPS Touchscreen Monitor

Features:

  • 7-inch,10-bit panel with a resolution of 1920 x 1080 and a 1000:1 contrast ratio.
  • Daylight-viewable with a maximum brightness of 1,000nits.
  • Supports 4K oversampling to 1080p.
  • Wireless camera control for A7S III/FX30/ZV-E10, BMPCC 4K/6K/6K Pro via Bluetooth connection
  • Professional monitoring tools: Waveform, Anamorphic, Peaking, ARRI False Color.
  • 3D LUT monitoring and 3D LUT HDMI output capabilities.
  • Four user-assignable function buttons.
  • Built-in NP-F style battery plate.Low power draw of only 9W.
  • Customized peaking range(Peaking Frame).
  • Custom JPG picture custom freeze frame.
  • Custom rectangular image crop.
custom

The Portkeys LH7P has a maximum brightness of 1,000 nits, which is perfectly daylight-viewable.

The 10-bit (8+2 FRC) panel makes color reproduction more accurate with a rich level of color details and no color banding. Also, the 7-inch display has a FullHD 1920 x 1080 resolution, a large viewing angle, and a 1000:1 contrast ratio. At the bottom of the monitor, you’ll find one 4K HDMI input and one FullHD HDMI output.

The 4K HDMI input can take signals up to 4K DCI at 24p, 4K UHD at 30p, or FullHD 1080p at up to 60p. Lastly, the HDMI input of the LH7P supports 4K oversampling to 1080p, resulting in high-resolution, high-detail 1080p video.

4K
1080p

The Portkeys LH7P is packed with all the monitoring features you can expect from a professional monitor, including:

  • 3D LUT monitoring and 3D LUT HDMI output. You can load custom LUTs via the USB port at the bottom of the monitor and the included USB key.
  • ARRI False Color mode and user-defined mode. When you use the user-defined mode, you can freely set the IRE values.
  • A new Peaking algorithm with a Peaking Frame feature so your camera’s UI can stay clear.
  • Cropping feature to precisely zoom wherever you want inside the image.
  • Framing guides, grids, aspects, and Auto image flip.
  • Image Capture and Image Overlay. Image Capture takes a snapshot of the HDMI video input (combined with a LUT if desired) and saves it to the monitor’s memory. Then, you can set the transparency/opacity of the Image Overlay. This feature is helpful for shot matching (continuity) or a quick overview of the day’s shots.
  • Anamorphic image de-squeeze with all the standard ratios (1.33x, 1.5x, 2.0x) and the possibility to enter a custom aspect ratio from 0.25 to 4.0x.
  • Stretch leg tool: when shooting vertically, you can stretch the bottom part of the image. The stretch leg tool feature can be sent to the HDMI output.
  • Sharpness, chroma, brightness, backlight, tint, and color temperature adjustments.
control
3D lut

joe
Reviewed in the United States on March 18, 2025
Awesome monitor. Some quirks but works. screen is huge.
christopher jackson
Reviewed in the United States on January 7, 2025
This monitor is by far one of the best out there. The ability to focus wirelessly with my Sony cameras the large monitor makes it easier to see everything. The build is solid and fan noise is not that loud in low mode.
tank
Reviewed in the United States on January 18, 2025
This is a decent little monitor. Build quality is okay. The fit and finish are decent albeit the plastic is pretty weak. Seems like ABS plastic similar to what your old school alarm clocks were made from. It feels solid enough on it's own but once you strap a big NP-F9 battery on the back, then you wish it were sturdier. Screen quality is actually very good with good focus peaking, RGB parade, and luminance parade (actually better than the camera). As far as touch sensitivity goes, the screen is very responsive, not as good as a phone screen but pretty close. Even pinch to zoom works great (albeit in steps). Fn buttons are easily mapped and the 1/4-20 mount holes on all 3 sides makes it very versatile.As far as cons go, there are a few. Biggest issue is that it's very picky about the cameras that it will connect to via wirelessly. I assumed my A7R3 and R2 would work since they listed the RIV and RV but that's not the case at least not with the V1.181D.B51 firmware. The fan is a little louder than i expected, especially when at full brightness but it's not terrible and i don't hear it on recordings. Output wise, the HDMI output is limited to 1080/60 which is a little bit of a let down. Lastly, and least importantly is the carrying case that it comes with is super cheap. It's basically one step down from a takeout food container. Luckily i have plenty of space in my camera bag and don't need it. Small gripe i know but worth noting. Overall, it's not a bad monitor, especially for the price. True, there are better options out there however they do also get incrementally more expensive as well.
Chad
Reviewed in the United States on July 8, 2024
this looks, feels and has the specs of a solid unit. on paper? its a home run! in reality? i will never know nor do i desire to see any longer.this excluded a battery, mount, cables, and anything else i might need, outside the screen.using some "around the house" tech adapters i could hook it up, but i cant power it anyways. (no power brick, or battery included or available)this is a sad example of what could have been. the item does look nice. but this as a product is a total fail.
NancyDrew
Reviewed in the United States on July 8, 2024
This monitor came well packaged. I use an Atomos Ninja V for monitoring and recording. For where I need only monitoring and no recording, I tried this monitor. This monitor is super bright and the resolution is good enough. The viewing angle is perfect. The monitor itself is built very well and the metal the metal chassis speaks heavy duty. The mounting threads work just fine on my rig. What's nice about it is it uses Sony NP batteries that I use for the Ninja. So I can reuse a whole bunch of batteries that I already have and do not have to invest anything on batteries. Overall this is a nice monitor.
Tom Savola
Reviewed in the United States on July 26, 2024
I have not used an external monitor so I wasn’t quite sure what to expect. This one worked very well when I set it up outdoors; the screen was bright, clear and large enough for a few people to watch at the same time. I didn’t set the monitor up but that person who did had no issues or complaints and it worked right away. I’m looking forward to seeing what else I can do with it.
Jackie
Reviewed in the United States on June 4, 2024
Very nice monitor. Sharp, bright and controls are super easy to use. Plenty of built in features including scopes, focus peaking and false color. I've heard other complain about the menus, but they are simple and intuitive and easy to navigate through. Battery life is pretty good also, running a couple of hours on a small(ish) NP. I was hoping to use this in a cage as a director's monitor, but since all the inputs are on the bottom of the unit, cable clearance isnt great. Ill either have to get lighter weight hdmi cables or use a 90degree adapter. The monitor comes with a perfectly sized hard case, a monitor mount which tilts and 2 screen protectors, which after trying to install, I threw right away.Such a small negative on connector placement, I say this is a 10/10.
Jingjing
Reviewed in the United States on May 30, 2024
The media could not be loaded.
Recommended Products

$69.99

$ 33 .99 $33.99

4.3
Select Option