Noctua NT-H1 3.5g, Pro-Grade Thermal Compound Paste (3.5g)

Great quality product used it in my HP laptop and now temps are back to normal

Noctua is a real hero for making this mounting kit. I bought this mounting kit to replace a suspicious aio with an old noctua nh-d15 I had lying around to go on an lga1700 motherboard. And it fits like a glove. Also bought some of noctuas thermal paste. I can’t say enough about how good that paste is. I’ve tried a lot of dif brands and this one is reliable. It never dries out and I get good temps. No complaints.On a side note if you buy this mounting kit do make sure that you use their backing plate included in the kit. If you don’t it may not tighten down all the way because the threads in the thumbscrews most likely aren’t deep enough to fully tighten down on your old backing plate.And it will probably be a bit loose.That was the case with mine and im glad caught that right away. I was just too lazy to take the rear panel off the case and fish it out. With that said this kit will work on an lga1700 motherboard.

Excelente pasta térmica, fiz a limpeza do meu PS4 e substitui a pasta térmica, o PS4 está funcionando silenciosamente como novo..

Used this paste for a Definitive Technology BP2002 amp and it did its job and then some! Kept the amp cool and running perfectly!

Easy to apply, the consistency of the paste is smooth and doesnt get too stringy. Went ahead and reapplied paste for my cpu and gpu and noticed a nice difference in the temps after. Highly recommend!

Fast delivery and it’s good quality my laptop no longer overheats

The Noctua NT-H1 3.5g Pro-Grade Thermal Compound Paste is undoubtedly one of the best thermal pastes available, delivering exceptional performance for computer enthusiasts and overclockers alike. With its outstanding heat transfer capabilities and easy application process, this thermal paste is a standout choice for maximizing cooling efficiency. Here's why I wholeheartedly rate the Noctua NT-H1 3.5g Thermal Compound Paste with five stars:Unparalleled Heat Transfer: The Noctua NT-H1 boasts exceptional heat transfer capabilities, allowing for efficient dissipation of heat from your CPU or GPU. Its unique composition and high thermal conductivity ensure optimal thermal transfer, preventing overheating and maintaining stable temperatures even during demanding tasks or overclocking. The paste effectively fills microscopic gaps between the heat source and the cooling component, facilitating superior heat dissipation.Pro-Grade Quality: Noctua is renowned for its commitment to quality, and the NT-H1 thermal compound paste lives up to the brand's reputation. It is a pro-grade product that meets the stringent standards set by computer enthusiasts, professionals, and overclockers. The NT-H1 paste is carefully engineered to deliver consistent and reliable performance, providing peace of mind and optimal cooling efficiency.Easy Application: The NT-H1 paste's consistency makes it incredibly easy to apply. Its ideal texture allows for smooth spreading and even coverage, ensuring uniform contact between the heat source and the cooling solution. The syringe packaging, combined with the included applicator, simplifies the application process, making it hassle-free, even for users with limited experience in computer building or maintenance.Long-Lasting Stability: The Noctua NT-H1 thermal paste is designed for long-term stability. It retains its properties over time, maintaining its effectiveness even after extended periods of use. The paste does not dry out or become brittle, ensuring consistent thermal performance over the lifespan of your system. This reliability makes it an excellent choice for those seeking a thermal compound that can withstand the rigors of continuous operation.Broad Compatibility: The Noctua NT-H1 is compatible with a wide range of CPU and GPU sockets, making it suitable for various computer systems. It supports both modern and older generation processors, allowing users to confidently apply it to their preferred cooling solutions. Its versatility and compatibility make it a go-to thermal paste for different builds and upgrade projects.In summary, the Noctua NT-H1 3.5g Pro-Grade Thermal Compound Paste is a top-tier choice for computer enthusiasts seeking optimal cooling performance. With its exceptional heat transfer capabilities, pro-grade quality, easy application, and long-lasting stability, it stands out as one of the best thermal pastes on the market. Noctua's commitment to quality and performance is evident in this product, making it an essential component for maintaining optimal temperatures and prolonging the lifespan of your CPU or GPU. Choose the Noctua NT-H1 3.5g Thermal Compound Paste and experience the difference it can make in your system's cooling efficiency.

I used this paste to install 3 CPU's and redo the paste on a graphics card. The paste spreads out very nice on the chips, so do not use more than necessary. I seen a reduction in CPU temps. and GPU temps using this thermal compound. I highly recommend Noctua NT-H1thermal paste, it will be the only one I will use from now on.

UPDATE: Used it to re-paste my old laptop. Considering it gives out more heat now during load operations, I'm assuming it's working great. But then again, my laptop is more than a decade old so....yeah.Summer temperatures update:Alright. Summers are here in full effect. Ambient temperatures here in Dehradun are around 38° C average. Nowadays, the idle temperatures range between 50° to 55° C. Under full load when stress testing, maximum obtained temperatures were always around 80° to 82° C. When rendering videos in both Adobe Premiere Pro and After Effects, it averages around 75° to 80°C. And during gaming, temperatures never go past 72° C. Yeah....the temperatures have risen considerably now, compared to winters and spring, however I'm just using a budget air cooler, so it is still decent. Also, it's still better than what I used to get with the stock cooler and paste (+95° C on full load and +82° C when gaming). Also, my only exhaust fan died too, so there's that as well. I'll be upgrading my cooler, fans and maybe cabinet too, sooner or later, so maybe I'll post a third temperatures update here.This thermal paste lives up to its name. I personally used it for repasting my desktop. The processor is AMD Ryzen 5 3600, paired with a Cooler Master Hyper H410R RGB CPU Cooler. Even in the heaviest benchmark loads, temperatures never crossed 69° C (nice 😀). On idle, I get around between 30° to 40° C and between 55° to 63° C at the most when gaming. These are winter season temperatures, by the way. I'll update the summer season temperatures too.As for applying the thermal paste, it might get a little difficult first time, so I'd recommend watching some good application tutorials. The paste, in good conditions, is neither too liquidy nor too solid. Simply put, make sure to clean off the old thermal paste using +90% isopropyl alcohol, then just apply a dot of the thermal paste in the middle of your processor's TIM: around 2-3mm in diameter for Intel processors and around 4-5 mm in diameter for AMD processors, then mount your cooler. DON'T PUT TOO MUCH THERMAL PASTE. It's easy to get overboard.Don't be alarmed if the temperatures, immediately after repasting, aren't desirable or even higher than before. Thermal pastes have a specific cure-in time to spread and set properly, so continue using your PC as normal and the temperatures should normalise eventually; considering if you were sure the paste was in good condition and you didn't mess up both repasting and cooler mounting procedures.In my opinion, it's worth the Rs. 617 I paid for.

I’m og . I’ve religiously used artic silver 5 despite knowing That there are much better pastes available.If you’re building a Lot of systems Just get this stuff Top notch consistency probably the best bang for buck I guess there’s a reason why Linus always has it laying around One thing I especially love is the way it re-seals I feel confident storing this piece and being able to use it far into the future even after being opened..My other favorite feature is the very easy to understand directions which to be honest just for fun I followed and it made a difference I put precisely the exact size dot they recommended for my socket. Are used a caliper to make sure it was the exact amount directions recommended guess what literally the most perfect pace application I think I’ve ever had which is nuts considering how often I’ve done it and the fact that this is a brand new paste I’ve never used beforeI think people overlook directions but they can honestly be handy especially when there is much larger CPUs now like ryzen and epic. It’s clear the Germans probably over engineered the directions . If u follow them to a T u will get a gorgeous application . Just keep a expensive caliper handy lol ...This will now be my go to thermal paste you can’t be the amount you get for the price the performance is probably the same as Arctic silver five if not better definitely way better than the cooler master gelTake thermal paste performance charts with a grain of salt because I bought a new were hyper to Saul Evo and it came with cooler master gel paste It has absolutely abysmal performance arctic ceramic two is better than the stuff like I can’t believe how bad this cooler master paste actually is. It’s hard to use and it performs terribly I don’t get who rank that up in I think Tom’s hardware thermal case chart I can say with personal experience cooler master pro jell is the worst I’ve ever used. There is a caveat the cooler master Is completely conductive free which works great if you delid and don’t have nail polish around to protect the smds.... so yea that’s about all the cooler master stuff is good for ...Good job noctua . Pls go help cooler master with their paste and their mounting system..... please.The hyper to 12 Evo truly is a legend it beats many aios there is a reason so many old timers swear by that cooler ..

Excellent. I wish this for all my component cooling setup. Excellent delivery as well.

I used this on my 15" mid 2011 MacBook pro and the idle temp has decreased from +/- 78c down to around 64c. this was the first time I 'cracked the hood' on my MacBook so the heat sinks were also caked in dust. Otherwise the paste was a super easy application; no spreading required. I did a test run on their recommended size of 'dots' per CPU/GPU and the coverage was near perfect. Now I can browse the web in my lounge without sounding like I'm at the airport or feeling like I've got a hot water bottle on my lap.