Your cart is empty.
Your cart is empty.Product Description
About the Product:
SmallRig 2203B (New Version) is a form-fitting cage that enables you to mount accessories onto your Blackmagic Design Pocket Cinema Camera 6K or 4K. It is securely locked to the camera by 1/4’’-20 screws on the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles and scratches.
Key Features:
- Full Cage for BMPCC 6K or 4K Camera
- 1/4"-20, 3/8"16 & ARRI Accessory Threads
- Maintains Access to Camera Controls
- Integrated Shoe Mount, NATO Rails
NOTE:
1. This is the NEW VERSION cage 2203B, and please buy the corresponding NEW VERSION 2245B or 2246B if you need an SSD holder or a cable clamp for a perfect match.
2. When the cage is used with BMPCC 6K, SmallRig Lens Mount Adapter Support 2247 is NOT applicable.
Carlos
Reviewed in Mexico on February 15, 2024
Todo en orden, buena calidad
Todd Ingham
Reviewed in Australia on October 18, 2023
This cages assists with mounting the BMPCC on any stabilisers. Works well on a gimble to allow critical mounting.
BHarat
Reviewed in India on January 22, 2023
best
Eric Worthy
Reviewed in the United States on September 29, 2022
Not much needed to say, quality is great and it fits my bmp4k perfectly.
Eric Ahumada
Reviewed in the United States on June 10, 2022
This cage works PERFECTLY with my BMPCC4k! Over the years that I've owned this cage, my camera has accidentally fallen once from a tripod and luckily this cage took the brunt of the force. It SAVED my camera! SMALLRIG offers so many high-quality attachments like grips or mounts that can be added to the cage as well. There are plenty of screw holes to make this into whatever build you need for a shoot and is a must-have for anyone with a BMPCC4k. I wish it was a little cheaper, but for the build quality, you can't complain much. Would DEFINITELY purchase again.
MidAmerican Viking
Reviewed in the United States on February 25, 2022
Great cage, lost of add on options, lots of inherent options with the included holes to better balance the camera + lens.
Customer
Reviewed in the United States on August 6, 2021
If you are looking... pause and buy this now! I have three BMD cameras and each have this cage for accessories. The mounting points for rigging options is astounding. I’m glad the price point is low because the accessories that can be mounted tends to add up. Grab an SSD holder, and a top handle for starters. After that, the world is yours... but you need this cage to be a make the most of the camera system (in my opinion). You can add hand grips, articulating arms, cable clamps, cold shoe mounts (mics, monitors, transmitters, converters...). The next phase of your production life starts with THIS. Go for it! BKYLE_
D. H. Lawson
Reviewed in the United States on October 8, 2020
This is a very well engineered and built BMPCC 4K/6K full cage. It holds all of the accessories I need (plus some space for ones I don't know I need yet.) I got this because I needed a sun hood for the screen and a way to hold external drives. It had two NATO rails, and I got an attachable one for future needs.All in all, this is a impressive piece at a good price.
Kyle Hall
Reviewed in the United States on August 17, 2019
This cage is amazing, from the quality to how much you can build this out! Two problems..the camera always tends to swivel, meaning it will rotate with the slightest pressure in the cage while filming. The bolts are as tight as they can get, a bit unfortunate. Lastly the port slots will get quite crowded while trying to plug or unplug more than a few external devices. Not enough room around those slots. Besides the frustration with that, I still highly recommend this product.
RedTerrier
Reviewed in the United States on July 17, 2019
First off, if you're wondering about getting a cage for the BMPCC 4k the answer is 100% YES. You need to rig this camera up to get the benefit of its crazy specs.Anywho, this cage does exactly what a cage should do - allows for dozens of configurations of accessories thanks to multiple screw mounts and cold shoes while still allowing access to the essential ports on the camera. Want to completely rig out the camera for professional shoots? Done! Need a low profile look that can still fit into your camera bag? Done!There is a tiny bit (like, maybe 2-3 degrees) of play between the camera body and the cage on the x-axis going side-to-side, but that's not something will affect how you shoot. The metal of the cage is sturdy and should protect the majority of the camera body should you drop it, too. The only slight flaw I have with the cage is that it doesn't have as many mounting points as it could, but that's a small quibble.Don't hesitate to give this a go, the price is right and the quality is undeniable.
T.SELVAKUMAR
Reviewed in India on October 18, 2019
Best Cage in the market for BMPCC 6k
Señor Boots
Reviewed in the United States on January 29, 2019
I really love how this cage has its own L wrench that is magnetized to stay in place. Very helpful when your on the go and your not by your tools to. Very easy to set up and its very durable. Theres lots of room to expand on it and i personally like how the cage adds to the feel of the camera. almost as if its adding more comfortable grip to the camera.Only CON that i see with the cage is that it does protect the camera 100% some area stick out more than other or flushed around the edges. This isnt a deal breaker by any means. Solid piece of purchase.
Joel A.
Reviewed in Canada on April 4, 2019
This cage is super sturdy thanks to 3 points of contact with the camera. It’s also highly versatile. I can place my Nicyrig handle (cheeseplate) in 6 different positions and get nearly all my accessories on it while still maintaining a small footprint overall. The built-in Allen key/hex wrench holder is nicely tucked underneath and the camera with the cage still fit nicely inside the MOZA air 2 gimbal. Love this cage.
Recommended Products