Shopping Cart

Your cart is empty.

Your cart is empty.

MOOSUN Go Kart Centrifugal Clutch 1' Bore 14T 40/41/420 Chain for 6.5hp 212CC Engines

Free shipping on orders over $29.99

$18.89

$ 9 .99 $9.99

In Stock

About this item

  • Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
  • Sprocket: 14 teeth,For Chain: #40/41/420,(chain not included)
  • 1" bore designed for 6.5hp 212CC engines, Fit for Go Kart and Mini Bike,Lawnmower
  • Centrifugal Clutch built in 14 tooth, 1" bore, 40/41/420 chain with 3/16 key
  • Mounts onto crankshaft using bolt and washer on the end of the crankshaft



Product Description

Clutch-Logo

MOOSUN MECHANICAL AND CENTRIFUGAL CLUTCHES act as inexpensive transmissions. They are designed to allow for safe, no-load, quiet starting of power equipment. Once engaged, MOOSUN clutches help reduce vibration, utilize peak torque for more efficient engine performance, and provide overload protection for operator and equipment safety. Centrifugal clutches are by far the most common and affordable clutches for go-karts.For proven quality centrifugal clutches, MOOSUN is your answer.

Clutch-65
You Will Get:

  • 1x 14 teeth #40/41/420 chain centrifugal clutch(chain not included)
  • 2x screws
Specifications:

  • Clutch Bore: 1"
  • Sprocket: 14 teeth
  • Clutch Dia: 107mm
  • Clutch Height: 56mm
  • Chain: #40/41/420
  • Engagement Speed: 2200±200 RPM
  • Recommended Engine: 2HP - 6.5HP, 1" shaft with flat key
Feature:

  • Material: Iron
  • Package Dimensions: (13.77 x 4.33 x 4.33)" / (35 x 11 x 11)cm (L x W x H)
  • Weight: 2.76 lbs / 1.25 kg
  • Clutch: 5/8" Bore 12 Toot
  • Fitment: Mini Bike, Go Kart

Clutch-1

Picking the right toy is one of the most enduring dilemmas faced by parents and grandparents, by uncles and aunts, and by godfathers and godmothers. Kids love toys, but nowadays there’s too much emphasis on gaming consoles and handheld video games. As a gift-giver, your responsibility is to give them something fun that can get them outdoors. But it must not be dangerous for the kids.So the Mini bike Go kart Fun kart should be the best choice.

Clutch-2

AS A KART RACER, YOU'RE CONCERNED WITH ONE THING: Getting across that finish line ahead of everyone else. And, to help increase your chances, you have to make a lot of decisions on whose equipment to use in outfitting your machine. At MOOSUN, we manufacture what we believe are the finest four-cycle racing go kart clutches in the world. Versatility by design allows MOOSUN racing products to be “tuned” to fit your machines own unique characteristics as well as the track’s. That means response … based upon your standards, not somebody else's.

Clutch-3

Is a Go-Kart Torque Converter or Clutch Better?

What's better, a torque converter or a clutch? The answer really depends on its intended use, which is ultimately related to your driving habit. As torque converters handle low torque ranges more easily, they’re most commonly used on off-road go-karts. They perform better at lower speeds and are ideal for stop-and-go situations. This is because off-road go-karts are sometimes required to climb uneven terrain at lower speeds.

Clutches on the other hand are snappier and perform better at high speeds. They’re designed to be constantly engaged, which makes them ideal for racing go-karts. High performance go-karts even have a multi-disc clutch to cater for various torque ranges. So, if you’re comparing a go-kart torque converter vs a clutch, you should make a choice depending on what you’re using it for.

Habits That Can Ruin A Clutch - Keep Your Machine Safe

Clutch-4

  • Driving too slowly: A clutch starts to engage around 2,000 rpm and will lock up around 2,600 rpm.

  • Short stop and go driving: The longer you drive at full throttle the better off it is for the clutch, because it gives it a chance to cool off before the next engagement.

Clutch-5

  • Driving with the foot on the brake: This is a problem with new drivers that are unsure of themselves.

  • Changing the size of the tires: Putting on tires that are larger than what came with the kart will result in clutch problems.No larger than 15" tall.

Clutch-6

  • Weight: A centrifugal clutch is designed to be able to move a certain amount of weight.

  • Gear ratio: The sprocket on the engine and the one on the rear axle should have a ratio close to 1:6.(10 tooth = 60 rear sprocket)

Clutch-7

Warm Tips:

About the Clutch Smoke:

The clutch weight rpm just isn’t excessive sufficient. The engine not being highly effective sufficient sometimes is the result of a mismatch in ratios to the rear-drive wheels. So the true motive is that the ratio just isn’t steep sufficient, and subsequently, the engine smokes the clutch.

The treatment for the primary clutch smoking drawback is to change the driveline in order that the general ratio is steeper. The easy technique is to extend the rear sprocket diameter.

So the clutch engagement rpm must be taken under consideration in any other case the clutch will smoke on the secondary jackshaft mounting place.

56-77

How Do You Install A New Clutch on A Go Kart?

ASSEMBLY INSTRUCTIONS:

Step 1: Remove outer drive cover. Loosen nuts on bottom of engine mounting plate allowing engine to slide back,loosening drive chain.

Step 2: Remove drive chain from drive wheel sprocket(axle sprocket). Remove bolt and washers from end of engine crankshaft while noting location of spacers and washers for installing new clutch.

Step 3: Remove clutch from engine crankshaft. Install new clutch by aligning key inbore of clutch with keyway in engine crankshaft. Slide clutch onto shaft.

Step 4: Reinstall bolt and washers that hold clutch on crankshaft. Tightenbolt.

Step 5: Reinstall drive chain on clutch and drive wheel sprocket(axlesprocket).

Step 6: Slide engine forward to tighten chain. Chain should have approximately 1/4" deflection when properly tensioned.

Step 7: Tighten nuts on bottom of engine mounting plate.

Reinstall outer drive cover.

WARNING! Guards must be inplace to protect rider(s) from rotating parts.

Clutch-8

Martin
Reviewed in Canada on May 26, 2023
La clutch vien bleue après 2 minute et pas capable d'avancer avec le gas aux fond et la clutch se lousse aussitôt,les deux screw bolt sert pas asser sur le shaft du moteur,vraiment dessusMoteurs :(13hp monter prédator )
Jeff Barbano
Reviewed in the United States on July 22, 2022
Put it a 8 hp and burned it up. To small,my fault
Ray
Reviewed in the United States on August 30, 2021
Works just as expected.
Alana Thompson
Reviewed in the United States on August 25, 2021
Exactly what I asked for
Jorge R.
Reviewed in the United States on August 8, 2020
It all good but it didn't fit my motor thanks
Fred martin
Reviewed in the United States on July 14, 2020
This clutch is totally trash installed and it doesn’t even have enough torque to move the go cart with no one on it just smokes. Pure junk.
Bradley
Reviewed in the United States on June 9, 2020
Neutral
Avery S.
Reviewed in the United States on June 8, 2020
Love it it was a good fit
Jessica Wilder Bolin
Reviewed in the United States on June 11, 2020
We bought this for our kids go kart. It was easy to install and has held up well. Our boys are pretty rough with that thing so I will definitely purchase again when the time comes.