Your cart is empty.
Your cart is empty.Product Description
Durable Construction
Crafted from sustainably sourced yellow pine in the U.S., these heavy-duty bed slats resist bending and warping for a reliable support.
Easy Assembly
Quick to set-up by just placing them in your bed frame for instant support and stability, perfect for a modern platform bed.
Sustainably Sourced
We use SFI-certified sourced southern yellow pine wood that we acquire from legal and responsible forestry practices making this product sustainable.
No Box Spring Needed
Designed for convenience, this wooden bed slats eliminates the need for a box spring. The closely spaced wooden slats offer ample support.
Fried Rice
Reviewed in Canada on January 10, 2022
Solid thick Pine Slabs 13
Ro Brit
Reviewed in Canada on March 4, 2021
The slats were solid and they were all of the same length-54inches. I measured the inner width of my bed before ordering the slats. Fit my bed perfectly. Giving it 4 stars because 2 of the slats had visible chips in them, about 2-3 Inches on the edge. Had to cover the chip with tape to prevent damage to the mattress. It looks sturdy.
🌸🫒dawn🐰🌸
Reviewed in Canada on February 17, 2021
Purchased used, and seems pretty solid
Cindy Burse
Reviewed in the United States on April 11, 2021
I ordered a queen size bunkie board, but I was either sent a king size bunkie board by mistake or somebody mixed up the length and width. I measured my bed frame between the rails before I ordered the product and it met the exact dimensions of the Queen bunkie board listed on Amazon at 59.875" W x 78" L x 0.75" H. But, when I opened the product this morning to install it, the boards were 78" W and 59.875" L so that they were too wide for my 59.875" W bed frame and too short for my 78" L bed frame. But it was too much trouble to send the product back so I cut down the frame width to 59.875" W and reused existing slats on my bed to make the bunkie board 78" L. I priced it out and it is only around $70-$80 to make your own bunkie board from scratch using your own wood, fabric, and staples. Not worth $129.99 if the product is not ready to use when I receive it. WOULD NOT BUY AGAIN.
Cassie
Reviewed in the United States on August 30, 2020
This is the worst product ever. The boards bend with very little weight and fall down through. It was used on a guest bed and not tested (didn''t think I would have to) and then a guest came and boards fell straight through. Petite 81 year old mother in law, scared her and could have injured her. Tried cutting into groups of three and adding firm boards between and doubling up the slats. They still fell through. This is not bunkie board wood. Past my return 30 days window. Out $80 bucks. I should have paid closer attention to the reviews.
Kelly Ruoff
Reviewed in the United States on August 23, 2020
Reading all the negative reviews really made me hesitant to even order this - but I did. Great choice!! Had an old bed frame that needed slat support for a hybrid mattress. I measured inside the rails and it measured 38". These slats were the only ones I could find that had the Euro twin option that measured the slats just shy of what I needed. These are true to size and they fit PERFECTLY in the frame. The end slats did have two holes to secure to the frame which I used to install 4 small screws. It is solid and secure support for this guest room bed now. Ordered on a Wednesday and was delivered on Saturday in perfect shape. Well worth it!!
Lee Griffin
Reviewed in the United States on May 17, 2020
Made my 8 inch memory foam mattress much sturdier. I have a zinus type king size platform but the bars allow the foam to moosh through so I needed more support. I used to have scraps of plywood under the mattress but this was lumpy and infirm in spots. These slats filled the bill and cross hatch with the existing bars. The only issued I have is that there is some space between the slats and my bed frame that allow the slats to slide a little. I fixed this by tieing the slats to the metal bars. Yes, it sounds like a hot mess but my bed is super comfortable.
View Junkie
Reviewed in the United States on March 31, 2020
I bought a new mattress and decided to get rid of my box spring. My Queen bed had three slats that screw to a ledge built into the frame sides. I didn't feel three slats would be enough to support the BeautyRest Platinum Preferred mattress without a box spring so purchased these slats. I wouldn't worry about the length of the slats - If your queen mattress fits onto the ledge supports, then the slats will fit. I worried a bit after I read a review about the slats being too long - or too short but they fit perfectly.The connected slats were awkward to place because the group is a bit heavy. It would have been easier to place them one by one because one is much lighter than the whole group at once. (I am an older woman.) Once the slats found support on the ledge I was able to slide them all into place. The tape stapled to the slats helped with spacing once positioned on the ledge. There was a slight odor and luckily it was a nice day so I aired them for a few hours. So far so good. The slats don't bend when I get onto the bed and it feels sturdy.
mndbendr
Reviewed in the United States on July 3, 2019
We bought our 4 and 2 year old each a "big boy bed" and mattress. I didn't want to get a box spring just in case they fell out of the bed at night. This makes the perfect solution for sturdy bed w/o the height (or expense) of a box spring. There was no assembly, simply open box and roll out onto bed frame. Fit like a glove. The only reason I didn't give it a 5 star is due to some of the wood peeling off a couple edges. Not that big of a deal since it's under the mattress, but I can see splinter in my future cleaning underneath or changing sheets.
C S Nunemaker
Reviewed in the United States on May 30, 2019
I have made the recommendation regarding measuring before ordering, not as a criticism, but as a suggestion. I have an antique twin bed that needed additional support. I ordered the Twin-XL for it, although it uses a standard twin mattress. The width between side slats was 39" but the length was a bit longer than a standard twin bunkie board's measurements. Good decision. I have full support from top to bottom. Ultrafast Prime delivery made me a happy non-camper.
Sarah
Reviewed in the United States on March 1, 2019
MEASURE YOUR BED FRAME!!!!!!! This is a perfect solution to support your bed. I needed this in order to eliminate the box spring of a twin bed so the bed would be closer to the ground (it’s for a little kid). I measured my bed frame as the company recommends and it worked PERFECTLY! I’m convinced all 1-star reviews complaining about missizing just made assumptions about their frame sizes - I assumed I needed a size that, after measuring, I found would have been too wide. This was very easy to un-box and install. It’s heavy solid wood and I’m confident the support the bed needs is there.
Customer
Reviewed in Canada on December 11, 2019
Most of the wood pieces are small in length ,they have curve in them. Wast of money and time to set up.
Irfan Khan
Reviewed in Canada on November 28, 2019
Measured accurately, no issues in installing. Also, wood is finely shined for smoother finish.
Recommended Products
$59.57
$ 28 .99 $28.99
$50.31
$ 23 .99 $23.99