Your cart is empty.
Your cart is empty.Product Description
50W Constant Current LED Driver
50W Constant Current LED Driver
HANNAHONG LED Driver output constant current. It transform the 110V Alternating Current Voltage to 24-36V Direct Current Output with Constant Current: 1500mA. The output power of it is 50W. You can use it for 50W(1pc), 100W(2 pcs),150W(3pcs) lights.
Wide Range of Applications
The Driver can be used on many kinds of LED lights:
1.Street Lights
2.Any kinds of Flood Lights
3.High Bay Lights
4.LED Modules
5.COB Chips
6.Spot Lights
7.Plant Grow Lights
Product Specifications
Basic Specification:
- Power: 50W
- Input Voltage: AC85-265V
- Output Voltage: DC 24-36V
- Output Current: DC1500mA
- Water Proof Rating: IP65
- Product Size:110*38*28mm
Easy to Install
With mounting brackets on the sides , it very easy to install with the LED light. Good for both hobbyist or professional
Highly Recommend tips
Full Wattage Power Supplier
Customer tested the wattage is spot on 47W to 49.5W ,very accurate representation to what is advertised.
Weather Proof
It is being used under a house in subtropical weather. It stood up to about 95 F and 100% humidity for years.
Kindly Reminder
Be Sure the Voltage match
The Output Voltage of the driver is DC24-36V, The series of the LEDs should be 8-12 for 3V LED chips or 4-5 for 6V LED chips, otherwise the led Diode may burn out.
Be sure the current match
The Output current of the driver is 1500mA. Please be aware the Current of your LEDs is match it and the total power is 50W. Or the light may not work properly.
Be sure the right installation
Please be aware of the positive (anode +) and negative (cathode -) of led products, install accordingly to avoid damage.
High Quality
IP65 Water Proof
The water proof rating of the driver is IP65. It will works well in wet & rain environment but avoid underwater usage.
6000K Surge Protection
The driver is designed to take 6000K surge protection. It works very good for street light, LED modules and any outdoor LED lights with long life
High Power Factor
With Isolated PCB board and high quality components, the PF of the driver is more than 95%. Much save your power bill.
JIV
Reviewed in Mexico on June 21, 2024
Buen producto,gracias.
Barry
Reviewed in the United States on May 8, 2024
Old power supply burnt out. Needed a replacement. Provided power and fit into same spot as old power supply.
John
Reviewed in the United States on May 18, 2023
My only complaint is it has a noticeably longer power-up delay compared to the transformer it replaced.Have not had it long enough to really comment on longevity, but seems solidly made.
Krista L.
Reviewed in the United States on January 15, 2023
This is a good driver replacement. I used a few of them in 2’x4’ flat panel trougher lights, 2 years later, still working
NomNom Tech
Reviewed in the United States on September 10, 2021
I’m happy with it so far but the only area of concern is how hot it gets when working at even a fraction of its max output. You will not be able to hold it in your hand. Out of an abundance of caution I used thermal glue to stick on some heat sinks and also connected it to a smart switch which turns it off after 3 hours. So far it’s working and if anything changes I’ll update my review.
Customer
Reviewed in the United States on August 17, 2021
Not positive when I installed it. Too late to return it though. Worked fine for a short time and now its like a strobe light. Ordered one from 1000bulbs, works well so far. A bit more in cost.
Sauce de la Apple
Reviewed in the United States on April 30, 2020
I just recieved the product and have only had a chance to test their accuracy which is spot on 49.6 watts to the LED. I will update based on longevity.So far I've used this for a year almost continuously and have found no problems other then the power would fall to 41 Watts. I realize that it was a key sinking issue and my hypothesis is that the LEDs we're continuing to demand more and more current as they were getting a little too hot around 166 degrees. So I imagined the power supply reduce the amount of current probably not being able to cool itself adequately. I updated the heatsink on the LEDs and the wattage now only Falls to 47.4 which I feel is a very accurate representation to what is advertised.Where this is being used is under a house with a raised Foundation no basement in subtropical weather. It has stood up to about 95 degrees under the house and 100% humidity for over a year.One more small issue that's probably user error is that the plastic mounting brackets on the sides is starting to develop stress marks no crack so far but they will happen. I can't complain being the$$$ value has far surpassed my expectations.I certainly would recommend this to any hobbyist or professional.
LB
Reviewed in the United States on August 25, 2019
Replaced a customer's LED fixture that stopped working, bad driver ballast, then bought this and voila, light works again. Most LED fixtures that stop working just need a new driver. Just be sure to size mA and output voltage to original fixture.
MrBCaShopper
Reviewed in the United States on November 4, 2019
Bought these to replace failed LED drivers in the outdoor lights I bought at Costco. The original drivers only lasted a few months but I liked the look of the lights and wanted to keep them. This driver seems to work fine so far (nearly a year). It is larger than the original but still fits in the housing. I would buy again.
Recommended Products