Shopping Cart

Your cart is empty.

Your cart is empty.

Geloo 240-33 ohm 9' Fuel Sending Unit Fuel Gas Tank Sender Marine Fuel Level Sending Units Water Gauge Sensor for Boat Fuel Level Gauge Sensor fit Fuel Water Lever Gauge Fuel Tank Sending Unit (225mm)

Free shipping on orders over $29.99

$28.88

$ 13 .99 $13.99

In Stock

About this item

  • SUPERIOR QUALITY: 9"(225mm) Fule Tank Sending Unit is Made SUS316 Stainless Steel and is a Standard SAE 5-hole type.It is the Direct Replacement for Arm Type sender. The advantages of fuel level sensor are accurate measurement, long service life, good shock resistance and corrosion resistance,keep you safe
  • WIDE APPLICATION: 240-33ohm Water tank sender is suitable for automobiles, ships, speedboats, engines, generator sets, engineering machinery, agricultural machinery, modified vehicles and other fields, and without limitation of environment
  • MULTIPLE SIZES: The length range is 150MM, 175MM, 200MM, 225MM, etc.Output signal: 240-33ohm.(240 ohms at empty, 33 ohms at full).Support 240-33ohm Fuel Level Gauge and Water Level Gauge (Please choose one length range & signal you need when placing the order)
  • EASY INSTALLATION: The water level gauge sensor is a Standard SAE 5-hole type, Easy to install and connect.Blue wire is connected to ground (-), Brown wire is connected to the gauge signal wire.Operational Temperature: -40°C -+85°C. Stable output signal, universal style, suitable for all kinds of material tanks
  • PACKAGE INCLUDES: 1X Fuel sending unit, Comes with 2mm thick gasket and 5 pieces of M5 mounting screws. Every products needs to go through strict quality inspection before leaving the factory, if you have any questions about the product, please let us know



Product Description

Appliant

sending unit 2

Wire Connection:

- Blue wire: connect the negative(-)

- Brown wire: connect the signal output

  • Package Include:
  • 1 x Sensor
  • 1 x Gasket
  • 5 x Screws

Marine Fuel Sending Unit Water Level Sensor Fuel Tank Sending Unit

Direct Replacement for Arm Type sender

  • Material: SUS316 stainless steel
  • Mounting Methods: Standard SAE 5 hole pattern
  • Mounting: 5 pieces of M5 screws and 2 mm thick gasket
  • Rated current for alarm switch: 500mA
  • Output signal: 0~190 ohm (Standard European), 240~33 ohm (Standard American)
  • Resolution range: 21mm
  • Operating temperatures: - 40 to 85°C
  • Waterproof Protection rank: IP67
  • Please attention :
  • 0~190 ohm sensors can only be applied to 0~190 ohm fuel gauge.
  • 240~33 ohm sensors can only be applied to 240~33 ohm fuel gauge.
  • (Please choose one length range & signal you need when placing the order )

Water Fuel Level Sending Unit

Fuel Sender Unit

Fuel Sending Unit is the Direct Replacement for Arm Type sender. The advantages of fuel level sensor are accurate measurement, long service life, good shock resistance and corrosion resistance,keep you safe.

Fuel Sending Unit

FUEL GAS TANK SENDER

Tank Sender

Wide Application

---It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto.

Tank Sender

Easy to install

---The Fuel sending unit comes with gasket,mounting screws,Takes about 15 minutes to install total, getting the fuel gage working again.

Tank Sender

High quality

---SAE 5 hole mounting pattern, heavy duty 316 stainless steel and rugged construction.

sending unit 1

WIDE APPLICATION:

---For Use in Diesel, Fuel, Gasoline, Water, OEM Replacement.

---It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto.

NOTE !!!

---To allow the sender not hit the bottom of the tank, the length of sender should be 1" less than the depth of the tank if tank is plastic, and 0.5" less than the depth of the tank if tank is metal.

Sensor Length: 150 / 175/ 200/ 225/ 250/ 275/ 300/ 350/ 400/ 450/ 500/ 550mm......can be choose.

Output signal: 0~190 ohm (Standard European), 240~33 ohm (Standard American).

---(Please choose one length range & signal you need when placing the order)


Juan Y
Reviewed in the United States on February 24, 2025
I received what I wanted on time and good condition
Kenneth roberts
Reviewed in the United States on February 14, 2024
Reads backwards full is empty and empty full
robert abraham
Reviewed in the United States on October 26, 2024
Worked when tested outside of tank . Won't put gas in tank until spring so I will keep my fingers crossed. Gasket and sending unit were not as big as my old one and holes were slightly off . Due to this screws all went in except for one which went in on a slight angle and did not tighten all the way. Messing with it proceeded to cause a mess as the head broke off. Just left it in.
TheKidd
Reviewed in the United States on October 23, 2023
Quality product, working well.
Ernest
Reviewed in Canada on September 15, 2022
Ths sending unit replaced a non-funtioning unit in a 2000 Glastron boat. Because the discripton was clear, I was able to determine this new nunit would fit.
Henry
Reviewed in Canada on May 28, 2022
Fit my Lowe Sea Nymph V FM 165S perfect appears to be very accurate but time will tell.Good price and quality at first glance but did not work. Regardless on how you hooked up the wires it sows empty when full and full when empty so I returned it.
Steve Hall
Reviewed in Canada on January 27, 2022
Changed a defective sensor on a boat. Works well. Nice to know how much gas I have left. This sensor is for North American gas tanks, not European tanks
John
Reviewed in the United States on September 13, 2021
I installed this unit in my 12 gallon portable outboard gas tank. Following the instructions made it simple to install. Now I can cruse around the bay and watch my fuel consumption right on my dashboard!
Bob Ramsey
Reviewed in the United States on August 9, 2021
This worked BEAUTIFULLY!! I installed a gas gauge on our golf cart and the original worked for about 3 months. The first one was in a float arm that had to be measured and cut to fit the tank. The first one was junk!This one was a SIMPLE INSTALL. It fit into the hole I cut for the first one. Even the screw holes lined up. There were no wires that entered the tank, like the first one.I wish I would’ve seen this Sending Unit first. This one works perfectly, and was a snap to install. I highly recommend it!
R K.
Reviewed in the United States on September 9, 2020
Used on a 63 Jeep, used a hole saw, made sure it didn't get to hot and sucked up the shavings with a vacuum. Popped this in, 5 screws and baam works mint!!
Joe
Reviewed in the United States on January 10, 2020
Bought this level sending unit to replace the old work out one I had in the boat. I was skeptic about it at first but it fit perfectly and seems to be doing it’s job. I did however have to place it on tank and rotate it back and forth to get all holes to align properly so I wouldn’t have to drill extra holes
Recommended Products

$85.40

$ 34 .99 $34.99

4.3
Select Option

$41.90

$ 18 .99 $18.99

4.5
Select Option

$42.90

$ 22 .99 $22.99

5.0
Select Option

$49.20

$ 21 .99 $21.99

4.5
Select Option

$94.95

$ 43 .99 $43.99

4.9
Select Option

$25.99

$ 13 .99 $13.99

4.9
Select Option