Your cart is empty.
Your cart is empty.Product Description
Eric
Reviewed in the United States on March 8, 2025
Good Item so far.
Inline3
Reviewed in the United States on February 24, 2025
Excellent thermal conductor, highly recommended.
Warren
Reviewed in the United States on August 12, 2024
I have an older Lenovo T440P and just put the highest clock rate CPU in it that I could. I use it for business.I was concerned as the issue I read was that it ran hotter (It does use more watts) and that the fan would be working harder. After reading paste reviews I purchased this paste and it seems to work great.At first I figured how different could the different pastes be, but the temperature has not risen any higher that the temperstires of the lower clock rate cores. The fan is not running any faster? The only difference I see in the mix is the paste?I have free software called Coretemp V 1.18.1 developed by Authur Liberman, which provides dynamic temperatures for each of the four cores, see picture. So far (a month) its been runing cooler and the fan really hasn't been been running differently. It replaced the CPU with the same i7 Haswell architecture chipsets, this one is runinng about 500 Mhz faster.Pleasantly surprised.
Seamus Steele
Reviewed in the United States on July 24, 2024
I’ve been building PCs for about 5 years. I recently upgraded to a ryzen 7700x which can run pretty hot. I had a tube of Corsair tm30. It performed well with my 280mm AIO. I still preferred arctic silver or mx-6 though. I found this and heard it was amazing for GPUs (direct die). Ordered a 1g tube to redo my CPU and GPU and oh boy was I pleased. Running the same stress tests in a controlled environment for 30 minutes generated this.Corsair tm30 CPU maxed at 74c. GPU maxed at 74cGC-Extreme CPU maxed at 70c. GPU maxed at 68c. I really wanted to make sure on the GPU so I ran it for a full consistent hour as I noticed the temps near the finish line. For the entire second half of the test it never went over 68c. All fan settings were locked at 50% for AIO, pump was 75% and GPU fans were 70%. I hope my findings have helped you make an informed decision.
Vishwa Gouda Sirsi
Reviewed in India on June 6, 2024
After turning on super cooler fan mode temperature drops very quickly
CATRINA
Reviewed in the United States on April 20, 2024
The media could not be loaded.
Le Jie
Reviewed in Australia on June 8, 2022
Thermal paste was used to repaste an overheating gaming laptop (ASUS GX531GM) back in April 2022. This lowered the temps of the CPU from 90-95 to 70-75 and the temps of the GPU from 75-80 to 55-60. Idle temps on the CPU are around 35-40. I was honestly surprised at the results, particularly on the GPU. The temperatures on the CPU could be even lower with undervolting but undervolting is locked for my laptop.1g of the thermal paste was more than enough for my laptop using the thin line method; however, the 1060 has a small die surface so for newer laptop GPUs a larger amount may be needed.As of writing this review, the temperatures of my laptop have stayed around the same, indicating that this thermal paste does not suffer from the pump-out effect.Highly recommended for laptop users.
Must Bisu
Reviewed in India on May 22, 2022
I used GC extreme because it was recommend to me and I'm thankful that i did. I used to hit TJ-Max on both my CPU and GPU as soon as i started playing RDR2 on my laptop. (With AC on at 25/26 degrees)I finally changed it's stock thermal paste after 3 months of use. Even though i don't play much, my stock thermal paste was almost dried out on GPU and CPU.Pros-1. Very reasonably priced.2. Works flawlessly3. Non-Conductive4. Much much better than stock thermal paste or the generic thermal paste these companies apply to our laptop in the name of "service".5. Heavy games like RDR2 are showing temps under 85 degree Celsius without undervolting/disabling turbo boost, which was not the case for me previously on the stock thermal paste. Idle temp was around 30-40. I'm personally very satisfied. (with AC on at around 26 degree Celsius)Neutral-1. Bit difficult to apply but good thermal pastes are generally thick and they are not easy to apply. I have also not done it before so, Kinda new experience for me.ConsNone as of day 1.Things to note-1. This is a day one review. Will edit it in the future as the need arises.2. If you want to have a rough idea about the temps (like really rough) use Hwinfo app and monitor idle/gaming temps. If you Want a better idea run Antutu, 3Dmark and other benchmark tests before and after applying this thermal paste.If someone is not willing to change the thermal paste themselves (which is fine) ask your laptop service guy to apply this thermal paste (buy it yourself), if the service guy is hesitant tell him that this is non-Conductive thermal paste (it won't damage the motherboard even if some of it spills on to the motherboard).
Josiah A.
Reviewed in the United States on August 8, 2021
Bought this thermal paste to replace the standard thermal paste on the Nintendo Switch heat pipe and Soc.Comes out a bit more viscous than I was expecting, honestly. Honestly has a viscosity similar to acrylic paint. Due to such a high viscosity, cleaning the spreading tool it comes with is a nightmare.Luckily if you just want to continue to use it, reattaching the head and pressing it out works well. I'm not sure how well it works performance wise since I don't possess a thermometer but I'd say it appears to keep things cooler than before, which is good.
M. Christophe Lavie
Reviewed in France on October 8, 2021
Expérience avec GELID SOLUTIONS GC-Extreme 3.5g nouvelle version (paquet bleu) + backplate + vis sur processeur socket 1150J'ai 2 supports ventilo avec attaches en plastique et je me suis aperçu que le contact n'était pas OK avec le cpu (mauvaise expérience aussi avec un vieux cpu AMD socket 939 grillé (car pas protection) à cause d'un support ventilo plastique fendu à cause de la chaleur et d'une position verticale), j'ai décidé de changer les vis plastiques par un backplate + des vis métalAvant : en idle 40-45 °C, en Full 100 °CAvec Gelid-Extrême nouveau modèle : en idle 27-35 °C, en Full 60°CDonc oui au niveau thermique, elle est super efficace.J'avais l'habitude d'étaler la pâte précédente car plus fluide, la Gelid-Extrême nouveau modèle est beaucoup plus épaisse : j'ai essayé de l'étaler avec ou sans l'applicateur mais le résultat est à peu près le même, après plusieurs tests, j'en mets beaucoup trop (d'autant plus que je peux serrer à fond le ventilo sur le proc) et je galère ensuite à l'enlever.Donc je suis revenu à la bonne vieille méthode, une boulette au milieu du proc.J'ai changé ma méthode d'étalage à cause de sa viscosité, du gaspillage engendré et de la fixation avec des vis métal, mais au final j'ai appris que mon proc pouvait monter à 100°C mais avec la Gelid-Extrême, il reste la plupart du temps à 60 °C.Bien sûr qu'une grosse partie du gain est dû au changement de fixation du ventilo mais les -15° à -18°C en idle prouve qu'elle est super efficace.
Ama10
Reviewed in Spain on March 29, 2017
Llevo utilizando esta series de pasta térmica desde hace ya bastante tiempo, muy buena al aplicar se reparte muy bien, las temperaturas geniales, y la duración muy buena en equipos con oc muy alto duración de unos 8/10 meses perfectamente, y rindiendo igual.La aplicación es buena, decir que esta pasta es bastante densa, por lo que se necesitara un poco mas de paciencia que con otras.Aplicada con un i7 4790k a 4.7mhz y junto la refrigeración Kraken X62 tiene unas temperaturas en reposo de 22/24 grados y a full con OCCT de 58/62 grados con una temperatura ambiente de unos 20 grados.Espero que te sirva de ayuda mi opinión.Producto recomendado.
Recommended Products
$24.99
$ 11 .99 $11.99