Your cart is empty.
Your cart is empty. The product datasheet:
https://images-na.ssl-images-amazon.com/images/I/918GgW8v9PL.pdf
Feature:
1, MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated).
2, Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode.
3, Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 8 Amp, maximum on-state current 12 Amp ( 4, Terminal Block: Wire range: 24 ~ 12 AWG / 2.5mm square. Strip length: 7mm. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass.
5, DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass PCB, dual copper layers.
Characteristic Parameters:
Input Signal Control Terminal:
Action Voltage: 3 ~ 32 VDC.
Current: 6mA at 5VDC, 8mA at 12VDC, 11mA at 24VDC, 13mA at 32VDC.
Turn off voltage: 0 ~ 0.8 VDC.
In-Out isolation surge voltage: 7500V.
Output Terminal:
Load voltage range: 100 to 240 VAC (50/60Hz).
Max. on-state average current: 8 Amp.
Max. on-state current: 12 Amp ( Non repetitive surge peak on-state current: 120 Amp ( Max. on-state voltage drop: 1.5V.
Max. off-state current: Off-state max. allow voltage: 400V.
Isolation: Phototriac.
Zero cross: Yes.
Load type: General purpose.
Terminal block specifications:
Wire range: 24 ~ 12 AWG / 2.5mm square.
Strip length: 7mm.
Screws - M2.5, steel, Cr3+ Zn plated.
Pin header and Cage - Brass.
Leomode
Reviewed in the United States on July 19, 2024
Es lo que pedi, exactamente. Gracias
tyler s
Reviewed in the United States on July 20, 2022
positive negitive 12v triger bramch a whier from positive conection to output ("b") will feed power conferm on to out put ("a") on
Billy Crawford
Reviewed in the United States on January 7, 2021
Loved the product. But if it was my money and not my companys I would go cheaper because I know it didn't cost what I paid for the item
Corim
Reviewed in the United States on February 4, 2020
As part of a larger box design, I needed a solid state relay for fast switching of Christmas lights. This did the trick in a convenient DIN mount form. No complaints other than maybe documentation could be slightly better.
Poobah
Reviewed in the United States on November 23, 2020
Finally, a relay board that won’t burn the house down or electrocute me. Quality design and manufacture. If you don’t need the din rail the end caps can be easily removed leaving the underside, with its high voltage traces, safely covered. Non-existent documentation.
Brian Darling
Reviewed in the United States on October 24, 2020
No issues still works in my cnc mills.
Recommended Products
