Your cart is empty.
Your cart is empty.Product Description
Heavy Duty Protection - Upgraded Gen 2 Design
Engineered durability that will perform under the most harsh conditions. Small footprint & light weight design maximizes available space ensuring mobility, even in rough terrain.
Durable Case Shell with Stainless Steel Hardware
Impervious to rust & corrosion from salt water & solvents.
100% Waterproof
Rugged case design is IP67 rated & can be submerged without water penetration.
100% Dustproof
Heavy duty gasket keeps dust, debris & particulates out.
AZEN MON
Reviewed in the United States on March 2, 2025
Fit all my baby in it nicely. Recommended.
M. Kelly
Reviewed in the United States on January 5, 2025
Highly recommend for any ps90 owner. Case and foam are high quality. Feels very robust and sturdy. Very pleased I purchased this product.
Jonathon S
Reviewed in the United States on March 15, 2024
This case is fantastic. The cutouts come with inserts pre-installed in case you don't have everything shown in the image. It also comes with an included box cutter should you need to modify the foam, such as I did for my Haga Defense handguard.
Customer
Reviewed in the United States on December 6, 2023
Everything fits nicely, but you're really railroaded into what you can have on your gun. The pistol cut out is useless to me since it won't work with optics or lights, can't modify it because it is too close to the ps90 barrel. Can't have a suppressed SBR or fake can barrel shroud or any other extensions off the front or to the sides. There are some limitations to what kind of optiic you have on the rifle and placement to some extent.If you keep the ps90 relatively stock, it is a really nice case! Good quality build, and the desiccant pack is a nice toich.Overall, I think they did what they could, but if you have ANYTHING that changes the profile of the gun, I would say to move on.I said a lot of negative stuff, but really it only docs one star from the rating.
Sonny F(tr)
Reviewed in the United States on January 27, 2023
I was going to purchase a Pelican case for my PS90, but saw this instead. I had no problems getting the foam out by just pulling it out with my fingers. There are some parts of the foam that do need to be cut out, so I'd recommend watching the video that is part of the Amazon website advertisement so you know what parts of the foam can be pulled out and which parts have to be cut out. The cool thing is that mine came with a retractable utility knife inside the case that you can use to cut the foam. All the rifle components fit perfectly and very snugly.I do like that there is room for 5 magazines and although there is no room for attachments, I just unscrew my light that I have on my side picatinny rail and put it on top of my Glock 10mm subcompact handgun that I keep in the case with it. Actually, any extras that I need to keep in the case I just put on top of my handgun (like red dot sight batteries, sight adjustment tools, etc.) all fit on top of the handgun or in the space where the handgun magazines go. Especially if you have compact or subcompact handgun magazines you'll have extra space in each slot to put different extras. I love that this case looks like a laptop case to take to the range! Very high quality case and not bulky!Two things I didn't like about it:1) The box it came in clearly states "Made in China".2) There are no attachments if you ever wanted to use a shoulder strap.Other than those 2 disappointments, I'd still get this case again and would highly recommend it. You do have to partially disassemble the PS90 by just separating the receiver from the body, but that's easily done.
BH
Reviewed in the United States on April 21, 2023
This is exactly what I was looking for. The cutouts were easy to remove, perfectly sized, and there's a little space to grow for adding your handgun and few other accessories. Great case!
Matthew A Van Blarcum
Reviewed in the United States on December 14, 2022
The case is great, very durable and tough firearm fits nicely in their five additional mag pouches, including the top is extremely nice give me a 250 round capacity in that case with your rifle cuts nicely for optics. The only downside is having to change the dehumidifier and resetting that every few months.
Tire_Iron
Reviewed in the United States on May 14, 2021
Very pleased with the case so far. Will be pointing out a couple nit picks, but they weren't really problems, so much as observations.First I want to touch on the dessicant box. Not going to strike any points for it because I view it as an extra, but it feels like it's flimsy stamped aluminum, and I bent the lip of the outer layer of aluminum just handling it before putting it in it's designated slot. I'm sure it's intentionally thin to cut down on heat retention when you have to bake it to recharge it. Recharging instructions are also stamped into the top of it, so they won't be lost in the time between recharges.Next I want to explain the picture I marked up.Green: the section of foam was fully cut out and did not need any additional cutting to remove the foam scrap from the hole.Blue: This one magazine slot was precut AND removed, it was where the sealed bag the dessicant box and the box knife that was included for trimming the foam were placed. This was the only slot that I did not have to remove myself.Red: These sections were partially pre-cut, leaving perforations that would need cut or torn out to remove the scrap. As mentioned, a small box knife that fully extended was just long enough to cut these perforations in a single stroke was included.I included a picture of my pistol and two magazines in the case along with the PS90, it is a Steyr M40-A1, it fits well in the full size pistol cutout with about an inch of space in front of the muzzle. That said the magazines sat loosely in the pistol magazine cut outs. I'm pointing these out so people have a frame of reference to see if their pistol and magazines will potentially fit in the cutouts or not, not as a negative for the case as first and foremost it's a PS90 case, the pistol slots are just a bonus.The picture of the empty case I had not removed the two blocks of foam for the optics yet, but the picture with the full case has them removed, and both sections of foam needed to be removed to fit the reflex sight I have mounted on the rail.The biggest complaint I feel I could muster for the case is that maybe one of the sections that someone buying a carrying case for a PS90 would reasonably be removing (the section for the lower or the barrel) should have been removed to place the dessicant box and knife in for shipping, in case the buyer hasn't any intention of using the pistol cut outs, but that is entirely cosmetic.
Recommended Products