Your cart is empty.
Your cart is empty.Product Description
Suitable For 1/4" screw attachment fits most SLR, DSLR. point & shoot, and video cameras
The handgrip comes with a female 1/4"-20 threaded receiver on the bottom, allowing you to connect two or more handgrip, or other accessories with a Male 1/4"-20 threaded rod, together.
Weight:95g
Package Including:
1 x Handle Grip (black)
Annyea
Reviewed in the United States on July 14, 2024
It’s relatively heavy and nicely textured. The one inch diameter makes it the perfect size if mounted on a very low tabletop tripod. Just add a basic dumbbell weight around it (just above the tripod)—and an elevated (top heavy) light or object above the tripod is stabilized…. The only real issue is it is all metal—so your hand may get cold if you use it as a handle when outside during winter. I’ve bought many of these
Stephen D. Ferris
Reviewed in the United States on May 10, 2024
Really, it's a very nice piece: well-finished, great heft, and excellent 'feel' in the hand with its knurled texturing.When I looked at the seller's photo in the online Amazon listing, it was clear something was amiss - i.e., the shaft diameter was stated to be 25mm (just a hair under 1" - which made perfect sense), while the total length, including the protruding 1/4"-20 threaded stud, was shown as 70mm. That's 2.75 inches, or just 2.75x the diameter.Allowing say 5mm for the 1/4"-20 stud, this would mean the "grip" portion was only 65mm high. That's just over 2.5".No way! Just look at it and one can see this is impossible. And you wouldn't want a just-2.5" long grip.Then watch the little video. The guy demonstrating the grip does NOT have a 2.5" wide hand. And neither do you. Children might, but not adults. My guess was that the grip portion was about 3.5" high.Anyway, went ahead and ordered it. It came and, sure enough, the total length / height of the entire piece is 96mm, with the grip portion being 91mm. So the grip portion is actually almost 3.6" in length.Makes much more sense - but why does the seller not correct the diagram?With the corrected understanding: highly recommended (for 1/4"-20 uses ONLY [ I tried to remove the stud, thinking perhaps one could substitute a 3/8"-16 x 1/4"-20 'adapter' - but to no avail: if that is possible, I could not do it.)
dan ahern
Reviewed in the United States on January 24, 2024
I actually didn’t expect it to weigh as much as it does. It’s fine, but I keep it in my pocket with a phone mount, and probably should have bought a lightweight plastic one. But I like that it’s short, and with my attached phone mount, I can get it in a jacket pocket pretty easily.
Wyatt Elliott
Reviewed in the United States on April 6, 2024
Makes aiming/holding a camcorder a lot easier and more natural than cupping the camcorder in an unnatural position (less wrist strain). Was surprised to see another threaded hole on the bottom to either extend the grip or add another attachment side mount as seen in the image.
Carla Ooyen
Reviewed in the United States on August 16, 2023
Nice and beefy. We have it screwed to a BIG AF zoom lens. It helps stabilize for pictures, but yet I guess I didn't think through that you have to NOT be holding it while you work the zoom and then you are still supporting the weight of the lens with the SLP camera body.
Workshop Nation
Reviewed in the United States on July 16, 2023
I love this handle for sim many reasons: it’s black, it’s not too long, and it has a 1/4-20 receiver on the other end, so you could attach all kinds of things to the bottom of the handle. I would by ten of these but for one big problem: the screw is too short. It works, but it’s shorter than most 1/4-20 camera screws by a few threads, and this make me very nervous when attaching a $4,000 camera to it. Can you guys please make the screw longer, just by one or two threads?
WizardMan420
Reviewed in the United States on December 15, 2023
This is a sturdy metal grip with a substantial weight. High quality.
Michael Hacking, Lifegiant-Media
Reviewed in the United States on December 15, 2016
Solid and has a 1/4 hole to screw accessories into. I expected it to be small and cheesy but I have huge hands and I can work with it as a side facing hand stabilizer on another item I bought. A+
Recommended Products