Shopping Cart

Your cart is empty.

Your cart is empty.

Big Air Super Shadow Wakeboard Tower Bimini Top - 76' x 76' - Mounts Over Existing Wake Tower

Free shipping on orders over $29.99

$739.00

$ 99 .00 $99.00

In Stock

1.Color:Navy


  • A HUGE 76" x 76" square frame that can adjust to virtually any position (not one size fits all like most competitors)
  • Must mount onto round tubing (cannot attach to flat plate, or oval tubing) - WAKE TOWER NOT INCLUDED -
  • Will accommodate 1-7/8" tubing (5.89" circumference) to 2-1/2" tubing (7.85" circumference) - All mounting hardware for these measurements is included.
  • Fits over the top of your tower to offer headroom, speaker and light clearance
  • 100% compatible with your Big Air wakeboard tower or virtually any tower on the market. Fits other towers including: Monster, Aerial, DIY, Barewest, Samson and OEM Towers



Product Description

** THIS PURCHASE IS FOR THE BIMINI TOP ONLY. THE WAKE TOWERS IN THE IMAGES ARE NOT INCLUDED IN THE PURCHASE. **

The Super Shadow Bimini is our over-the-tower bimini that fits over all Big Air wakeboard towers and virtually all other towers on the market. At over 6 feet on all sides, you will enjoy all the shade coverage this universal bimini top offers!

The Super Shadow Bimini frame is constructed of 7/8" brushed stainless steel tubing. This gives you a light frame with supreme durability. We also use nylon, non-marking clamps to attach the frame to your tower.

The Big Air Super Shadow Bimini must mount onto round tubing. We cannot accommodate oval tubing, square tubing, or cast towers.

Simple Design. LOTS of shade!

white boat on water with small yellow stripe, checkered decal on back, white tower, and black bimini

Large 76" x 76" Bimini top! That's over 6 FEET on all sides!

Features and benefits of our Super Shadow Bimini includes:

  • A 76" x 76" square frame that can adjust to virtually any position (not one size fits all like most competitors)
  • Must mount onto round tubing (cannot attach to flat plate, or oval tubing)
  • Will accommodate 1-7/8" tubing (5.89" circumference) to 2-1/2" tubing (7.85" circumference) - All mounting hardware for these measurements is included.
  • Fits over the top of your tower to offer headroom, speaker and light clearance
  • Hand-sewn and double stitched with fade-proof and stain-resistant fabric
  • Installs in minutes - no tools needed after initial installation
  • 100% compatible with your Big Air wakeboard tower or virtually any tower on the market
    • Fits other towers including: Monster, Aerial, DIY, Barewest, Samson and OEM Towers
  • Speed tested up to 50 mph on the water
  • Super Shadows cannot be matched by others on the market
couple waving standing in boat with tower and bimini top

The Super Shadow Bimini; top aftermarket over-the-tower bimini

At over 6 feet (76 inches) on all sides, you will enjoy all the shade coverage, and additional clearance!

Truly compatible with other round tubing manufactured towers

black and white boat with bimini on top

Super Shadow Bimini on XTP tower

white Mastercraft boat with Zero Flex tower and bimini

Super Shadow Bimini on Mastercraft Zero Flex tower

white boat black stripe and yellow accent with Joystick tower and Super Shadow Bimini

Super Shadow Bimini on Joystick tower

white and yellow boat with tower and bimini top

Super Shadow Bimini on OEM tower

Allowing ample clearance to ensure your rope doesn't rub!

boat pulling wakeboarder

A dove-tail in the rear of the frame ensures rope clearance when the rope is taught with a rider.

boat pulling wakeboarder

Bow rise from boat acceleration, increases the space between the bimini top and the rope.

close up view of tower tow knob pulling wakeboarder

No rubbing on the canvas while your ride moves from side to side of the wake.

boat with tower, bimini  top, and man waving

For standard mounted towers, mounted at or by the windshield sweeping to the rear of the boat, the front of the bimini frame to the front horizontal section of the tower cannot exceed 48 inches.

larson boat in water with wakeboard tower and bimini top
Super Shadow Bimini shown on Cuda wakeboard tower

For reverse mounted towers that are mounted towards the stern of the boat sweeping to the front, such as the Cuda tower shown above, the front of the bimini frame to the front of the horizontal section of the tower cannot exceed 20-32 inches.

You can choose your bimini mount location, within our specified guidelines

(Most other top mount biminis are fixed position)

When you get your bimini top, you will have the ability to choose your mounting location. This means you will cut the hole for your tow knob, where your rope will attach. The tow knob will protrude through the canvas allowing you the ability to access it to attach your rope.

In your purchase, you are provided with a self sealing grommet to keep the fabric from fraying in this location. You will use this piece as your guide for your hole, trim to specifications, and install.

  • Simple and easy canvas install and removal (for travel off the water), means more time enjoying your friends and family.
  • The canvas has a pocket on the front that uses velcro to secure. We use clips, just like those on the front of your life jacket , for all other straps.
  • Adjustable straps ensure a tight fit and taught canvas.

stephen
Reviewed in the United States on August 10, 2024
The bimini top looks great on my boat. The frame and cover did not take much to put together, although I was not sure of placement. It's a universal top so where to place it is up to you. I reached out to the owner of the company for advice and he was very generous with his time and helped me via email/pictures. The price is actually on the lower end for the quality of workmanship you get. I would absolutely recommend 👌
Nicholas
Reviewed in the United States on July 22, 2024
Product was easy to install. Seems to be high quality canvass material. Accents my wake tower very well! I used this top on my Big Air Cuda wake tower
snipereng
Reviewed in the United States on December 27, 2024
The top is really good and it is really easy to put together. Once you figure it out. The instructions are very vague.
sebastian jose
Reviewed in the United States on August 2, 2022
El la descripción decía que se ajusta a la torre Big Air pero en realidad parece un rompe cabeza sin forma. Donde hay que hacer modificaciones y es súper de mala calidad. No lo recomiendo para nada 👎
pamela O
Reviewed in the United States on July 17, 2022
Cheap fabric, tore first use. Lots of plastic clips instead of zipper, flaps around, too many parts compared to my other smaller bimini. Buying another better quality bimini cover. This was junk. Very disappointed. I am a 100ton Captain, massive experience.