Your cart is empty.
Your cart is empty.Product Description
ODIER axle mount hitch cup for Chariot bike trailers
This type of trailer hitch only compatible with thule's products.
This ODIER 12.1mm axle mount trailer hitch only work with thule's bike trailer product.
Why you need more than one hitch?
A back up axle mount cup bike trailer hitch allows a second bike to tow the bike trailer without waste time on the install and uninstall. Each family member can be the towing role.
Key dimensions!
The hole diameter for axle to thru is 12.1mm.
Outer diameter of the attaching area is 28mm. (If your bike's drop out is not flat enough, please use an adapter or spacers.)
Do I need extra accessories to get the hitch attached?
Most bike only need a axle mount cup hitch
You can attach this hitch to most normal bikes.
Some bike may need QR adpater
If your QR axle bike's drop out is not flat enough, you'll need a QR adapter and extra long skewer.
High end bikes may need Thru Axle Adapter
If your bike use a 12mm thru axle, we suggest you using a thru axle adapter to get the job done.
(Our hitch support direct install with a thru axle, but if your bike is made of carbon firber, direct install may damage the bike frame!)
Get the right parts for your next ride!
We design our trailer hitch product according to famous bike trailer entity and do a lot of work to insure the compatibility. Beware of those suppliers who cannot even use real trailers when taking pictures. A poor quality hitch may not fit with your bike and easier to wear out the ball connector.
Kasey
Reviewed in the United States on January 11, 2025
The smaller set of 22mm sleeves (marked "S01") fit the tongue of my old Avenir cargo trailer, which has a matching 22mm inner diameter. I didn't end up using the O-rings, as they wouldn't fit, but the sleeves stayed in place just fine without. Note that there's no nut and bolt provided to fix the hitch to the trailer, you'll have to re-use the original.Attaching the receiver to the bike is pretty simple. It's very sturdy-feeling, but also heavy. If you're pulling a trailer, you probably won't mind the extra bit of weight, though.Attaching the trailer is fairly simple, although you may need to have the tongue at an angle to the bicycle for it to slide in. The ball and socket move quite easily, and also don't rattle very much. Overall, it's a pretty good arrangement as it allows the trailer to move in any direction, helpful when leaning in a corner or going over bumps.It's overall a very good upgrade, and with the sleeve system should fit a very wide variety of trailers.
Lucas Fam
Reviewed in the United States on December 9, 2024
my original hitch wore out and had a crack on the side. the metal silver joint connects to your rear wheel. its a standard fit. then you slip in the black ball and to prevent it from slipping out you put the pin thru with retaining bracket. the ball joint allows the trailer to pivot and move when I steer the bike. it also has a safety strap in case breaks or comes off.looks like quality material. the black ball joint feels like hard ABS plastic. I'm not sure if it has metal inside but it's feels like plastic outside. I wish they made that piece also out of metal. then you would feel even more solid. great replacement tho.
Recommended Products
$119.99
$ 46 .99 $46.99